diameter measuring system

... to reflect heat away from hot lighting systems in addition to their colour correcting properties, unlike traditional polyester type colour filters that melt and distort under thermal conditions. Material::Borosilicate or equivalent, Sodalime Diameter::+0.0/-0.20 mm Length/width::+/- 0.25mm Thickness::+/-0.20mm Wavelength: :300nm-1200nm dependant on type Wavelength Accuracy: :+/- 5nm Transmission::Tmax=95% dependant on type and substrate...

...The WARP 8 is an inline pipe measuring system for wall thickness and diameter measurement at 8 points or 4 axes. It provides all important measurement data required for manual or automated process optimization and control. In addition to the short return-of-invest time, the system offers high measurement accuracy as well as process automation and documentation functions. The static sensors allow...

... coils located on each side of the measuring sleeve create a magnetic field. The electrodes, positioned perpendicular to the coils, are in direct contact with the fluids, generating a voltage proportional to the flow velocity around the electrodes. Excellent reliability and stable measurement • The dual-frequency excitation system ensures stable measurement even in conditions with interference...

...The CLA SC-002 is bidirectional, resistive type force sensor. The measurement system is composed of a semiconductor strain gage. The measurement shaft is made of a 0.5mm diameter axis with a positioning notch for calibration and measurement. The design of that sensor is specially made for a high resonance frequency.

... Open circuit voltage Uo: 7.4 VDC Voltage Umpp: 6.1 VDC Current in MPP Impp: 1.36 A Peak power Pmpp: 8.1 Wp ±10% Battery lead cell: 4V/50Ah Fuse: 10A Output voltage Umpp: 3.3 VDC Output protection current: 6V/20mA (adjustable) Material: PVC/PMMA Color: yellow Diameter: 110 mm Wall thickness: 6 mm Total length: 3323 mm Upper part: 908 mm Middle part: 900 mm Lower part: 515 mm Installation depth: 1400 mm...

...Optical stand-alone dust measuring device for measuring emissions after electrostatic filters and chimneys without a filter system. Used for emission measurement (mg/m³) after electrostatic filters and filtration systems or for process control applications. Latest sensor design with automatic drift check (zero point and span). Material to be measured: Dust Technology: DynamicOpacity Measuring/monitoring capacity: 0 – 1000 mg/m³ Chimney/channel diameter: up to 8 m Process temperature: up to 400 °C...

...Technical directives for operational safety in force in Germany], and CENELEC 50404. This industrial plastic drum does not rust and can be easily disposed of through the recycling system. It is suitable for transferring and storing flammable and easily flammable liquids from explosion groups IIA, IIB, and IIC, such as laboratory waste, in industry or mining. Measuring only 6.5 cm wide and 12.5 cm in diameter, it requires minimal space, making it suitable for use in confined areas. Material: HDPE...

... has the following working parameters: - variable magnetic field strength - from -1.85 to +1.85 T, - variable frequency of the magnetic field change from 0.1 to 1.8 Hz (magnetic field change rate from 0.05 to 6 T/s), - dimensions of the magnetic field area with heterogeneity no more than 1 % - diameter 20 mm, length 20 mm, - working temperature region – 80 ÷ 365 К, - automatic and manual measuring modes. The basic option of AMS is the magnetocaloric effect measurement. - sample dimensions (min-max) (1-2)×(2-5)×(8-10) mm, - measurement accuracy of magnetocaloric effect: 0.1 K.

...Diameter: 45 – 75 mm, Length: 40 – 130 mm Testing Criteria: - Surface inspection using CCD camera - Surface crack testing with ultrasonic and eddy current techniques - Dimensional contour inspection: - Outer diameter, roundness, conicity (Measurement accuracy ± 0.0005 mm) - Length measurement (Measurement accuracy ± 0.01 mm) - Multiple sorting by dimensional classes (2 ranges) Cycle times depending on pin size: 2.5 – 5 sec/part...

...Artlighting OSRAM contacted HENRY & CO. for the design of a new energy-efficient museum lighting system. Among the design requirements, the spotlight needed to be extremely compact and have a limited number of components to facilitate low-cost production. Based on the design requirements, HENRY & CO. developed a low-voltage track lighting system with a directional light source measuring only 5 cm in height and 4 cm in diameter. The light source was implemented using a single COB LED, and the light beam was managed with the use of a conical reflector.

... to connect between 1, 2, and 3 load cells - Utilizes the internal EASYQS software that interfaces data with client data software - The machine is equipped with an HDD computer and a touchscreen - The load cell reading is performed 1000 times per second - Force kN: 100 - Number of guide columns: 4 - Number of ball bearing screws: 2 - Dimensions: 210 cm height x 111 cm length x 87 cm depth - Weight: 680 kg - Usable test height: 1200 mm - Plate diameter: Ø 512 mm - Test speed range min – max: 0.005 – 484 mm/min - Position control accuracy: ±1µm Reference: ND...

... documentation. Package includes: — Purge Pressure Analyser — Sampling Hose — 6mm T-fitting — Calibration certificate — Plastic box Input voltage:24V (via the controller) Measuring range calibrated:0–2500Pa Weight:0.6kg Dimensions (L x W x H):41mm x 80mm x 160mm...

...Absolute operating principle with magnetic signal detection via two read heads. Due to magnetic signal capture, it is extremely insensitive to oil, moisture, and dust. Large inner diameters of 96mm and 180mm. High accuracy and resolution. Perfectly suited for applications in CNC machine tools, e.g., swivel heads or rotary tables. Accuracy: +/-2.5s Resolution: 23 bit Max. speed (electrical): 5000 RPM Interfaces: Siemens DRIVE-CLiQ, Fanuc, Mitsubishi Inner diameter: 96mm and 180mm...

... due to its housing diameter of only 12.7 mm. Applications include: — Stroke measurements on riveting machines — Recording of press-in paths — Compensation measurements on bearings — Spring travel measurements on axles — Adjustment path measurement on lifting platforms — Length measurement on pipe bending machines Potentiometric displacement sensors always operate with a wiper system due to...

...Electronics completly Protected against liquids & dust. Built-in Air Cushion and fixed panel. Automatic diameter measuring using TESA's Patented system which determine Highest and Lowest point Parallesism and perpendicularity measurements. Measuring Span:415 MM Application Range :570 mm...

...• Suitable as a workstation or for integration into a special system • Modular design in a compact construction • Robust cast housing and machine table • Height-adjustable machine body • Mechanically adjustable rivet spindle stroke • Machine table with centering hole and T-slot • Two-hand operation at the machine table • Available with electrical control with and without measuring system...

...The roller support type 8/1 with electronics features a measuring system in this version, with a working range of 200-500 mm. The blue-red calibration device transmits the measurement of 220 to the digital display. Additionally, both spindles can be operated from one side. After calibration, the roller support is ready for use. The electronics operate independently of the power grid and are rechargeable. Clamping range: Dmax 460 mm - Dmin 210 mm Center height: 800 mm Maximum workpiece weight: 20000 kg Spindle diameter: 80 mm Machine tool: Measuring plate...

... medium, higher carrying forces can be achieved with the same size and better damping properties. Various designs are available, which can be customized at any time to meet special requirements in terms of installation space, load capacity, guide length / table diameter, drive type, position measuring system, etc.

...The compact DTD inductive sensor system consists of a gauge with a plunger guided by a plain bearing and a controller, which are connected to each other with a 3 m long cable. The controller has a diameter of just 18 mm and the 3m-long cable enables flexible installation. The DTD sensor system is based on an established LVDT measuring method. It impresses with outstanding precision and provides...

... grease and oil floating on the surface. Fluid: for liquid Other features: inline Applications: for partially filled conduit Process temperature: -5...+60°C / 23...+140°F Measuring range: -12...+12 m/s / -40...+40 ft/s Nominal diameter: DN200...1600 / 8...64"...

... Thickness and Eccentricity for Products up to 100mm (3.9in.) Outer Diameter Cables: Coax, CATV, Silane, Jackets Tubing/Pipe: PVC, PE, PA, Composite Pipes, Automotive, etc. Hoses: Rubber, Medical, Silicone, PTFE, etc. Properties Wall thickness testing from 0.3 mm Measuring of product sizes between 4 mm … 100 mm Option for multi-layer measurement Radiation protection thanks to safety concept Durable X-ray sources Communication via integrated interfaces such as Ethernet IP, Profinet IO or Ethernet TCP/IP Integrated web server in all processor versions Easy product recipe.

... appropriate threaded connection unions, as well as special versions are available - individual water meters for manifold, valve, water meter fittings and parts provide as optional devices. Conformity - Accurancy:ISO4064- OIML R49 , EN14154 (MID Approved) Nominal Diameter DN:DN15-DN50 Measuring Nominal Flowrate R(Q3/Q1):R100 (MID Approval) Metrological Class:Class B ( ISO )...

...Stand-alone system for measurement of wire guides, mouthpieces and drawing dies - Device details: ■ Robust and compact design, easy to handle ■ Fast, reliable and highly accurate measuring process ■ Integrated hardware and software, touch monitor for intuitive operation ■ Reliable, high-precision clamping of the test specimen (including conical tools / conical wire guides) ■ No extraneous...

...With its cylindrical measuring head measuring just 16 mm in diameter, the MCG-TT length measuring systems offer countless installation options. Do you have limited space for installing a length measuring system and do not want to miss out on the advantages of Newall length measuring systems? With its cylindrical measuring head measuring just 16 mm in diameter, the MCG-TT length measuring systems offer countless installation options. Length: 1000 mm...

... of the RCN/RON/ECN series guarantees minimal deviations due to tolerances occurring in the shaft connection. All self-supporting angle measuring devices are equipped with shaft seals, providing high resistance to contamination (protection class IP64). These devices have a wide range of applications, such as in machine tools, measuring machines, telescopes, printing machines, etc. absolute measurement method hollow shaft diameter (up to 50 mm) integrated stator coupling easy installation Typical application area: rotary axes with reduced accuracy requirements...

... sensor is suitable for use in harsh environments. Interface: Analog, CANopen, CANopen Safety, Relay Material: ADC 12 die-cast aluminum Special feature: SIL2/PLd Housing diameter: 115mm, 120mm Number of switching outputs: 0, 1, 2 Measuring range: 2g = approx. 20m/s² (higher values available on request)...

...resulting in low transport costs - Accurate temperature measurement by measuring the object temperature - Recording of the heat treatment with a recorder on 6 or 12 channels Diameter: up to 3,000 mm Application area: Preheating, Annealing...

...ATON Wire is a stationary dimensional measurement system for continuous monitoring of rolling and drawing mill production. To meet challenging return-of-investment requirements NEXTSENSE offers high accuracy at a reasonable price. The ATON Wire gauges measure diameter and ovality of round profiles with a two-axes shadow sensor, a 50mm measurement range and an accuracy of 5 μm. Depending on the...

...A stereo microscope system for the microelectronics, electronics, and medical device industries. The magnification range spans from 5x to 30x, allowing the user to quickly switch from a broad overview to detailed observation. Thanks to Leica FusionOptics Technology, it also features optimal depth of field (DOF) of up to 13.6 mm in diameter. A greater DOF means less refocusing, saving the user...

...fast oneclick cantilever alignment, panoramic optical view and multiple scanning on 5×5 mm range.Cantilever recognition and automatic laser alignment both in liquid and air Autofocus Measuring heads:AFM and STM (stationary, automatically interchangeable); liquid AFM, and nanosclerometer head Available SPM modes:AFM, STM, nanosclerometry in air environment AFM in liquid environment System of...