Solar-tec II
Solar-tec IISolar-tec IISolar-tec II

Solar-tec II

Measurement post made of PVC/PMMA plastic with autonomous power supply through solar technology and complete integration of all system components. Measurement post with integrated solar technology. Complete integration of all system components into the measurement post. Monocrystalline solar module with translucent filter plate in post color to protect against vandalism. Integrated, replaceable lead-acid battery 4V/50 Ah, arranged below ground level to protect against temperature fluctuations. Charge controller with MPPT technology (Maximum Power Point Tracking) for maximum power yield under varying operating conditions such as irradiation strength and module temperature. Deep discharge protection to safeguard the battery. Stabilized output voltage 3.3 VDC to supply the Minitrans-Plus® Open circuit voltage Uo: 7.4 VDC Voltage Umpp: 6.1 VDC Current in MPP Impp: 1.36 A Peak power Pmpp: 8.1 Wp ±10% Battery lead cell: 4V/50Ah Fuse: 10A Output voltage Umpp: 3.3 VDC Output protection current: 6V/20mA (adjustable) Material: PVC/PMMA Color: yellow Diameter: 110 mm Wall thickness: 6 mm Total length: 3323 mm Upper part: 908 mm Middle part: 900 mm Lower part: 515 mm Installation depth: 1400 mm
Similar products
1/15
Two-Band System C50
Two-Band System C50
PALIMEX KS 200 and KS 220 – Two-band system for corrosion protection wrapping according to DIN 30672 and DIN EN 12068 for pipelines located in soils a...
DE-65606 Villmar
Cable Termination Set
Cable Termination Set
The cable sealing set allows for the safe and economical passive corrosion protection of cable connections for cathodic corrosion protection on pipes.
DE-65606 Villmar
Petrolatum Band F30
Petrolatum Band F30
For complex contours of pipeline fittings and corresponding to load class A 30 according to DIN 30672 and DIN EN 12068. The tape consists of a specia...
DE-65606 Villmar
Cold Shrink Tape Palimex 2000 S
Cold Shrink Tape Palimex 2000 S
Cold shrink bands are a simple solution for sealing when establishing a new air duct system or resealing an existing duct system. Our 3-layer tape set...
DE-65606 Villmar
Binding System C50
Binding System C50
PALIMEX KS 140 – Encapsulation system for corrosion protection coating according to DIN 30672 and DIN EN 12068 for pipelines located in soils and wate...
DE-65606 Villmar
Ring Space Seals
Ring Space Seals
When pipes or cables pass through exterior walls, ceilings, or protective conduits, it must be ensured that the entry points are permanently sealed.
DE-65606 Villmar
K 70 – PE Butyl Adhesive Tape
K 70 – PE Butyl Adhesive Tape
Butyl adhesive tape with a gray polyethylene film as the backing. It is not a shrink tape. Application area: For sealing butt joints for piping in ve...
DE-65606 Villmar
Lead Seals
Lead Seals
Lead seals have good embossing properties. Designed as a two-hole seal with opposing knot chambers.
DE-65606 Villmar
Metal-Free Glide Skis Mf
Metal-Free Glide Skis Mf
The KETTNER Metal-Free Sliding Skids MF are ideally suited for media pipes installed in protective conduits, as well as for cathodically protected pip...
DE-65606 Villmar
Clicfix Fastening System
Clicfix Fastening System
Mounting Plastic Signage Without Screws Mounting System ClicFix Mounting plastic signage without screws. With CLIC-FIX, plastic signs are securely and...
DE-65606 Villmar
Cable Protection Profile
Cable Protection Profile
It is applicable where pipes, cables, or channels intersect, are run very closely in parallel, or where there is a risk of force transmission due to s...
DE-65606 Villmar
K 20 – Soft PVC Adhesive Tape
K 20 – Soft PVC Adhesive Tape
The extremely soft film is coated with an aging-resistant natural rubber adhesive. Application area: Masking and wrapping of insulation materials suc...
DE-65606 Villmar
Allen Key
Allen Key
SW14 for activating the lid locking mechanism. SW10 for activating the level adjustment.
DE-65606 Villmar
K 80 – Aluminum Sealing Tape
K 80 – Aluminum Sealing Tape
The aluminum foil has a matte finish and closely resembles the surface of spiral duct pipes. The adhesive is made from butyl rubber with special resin...
DE-65606 Villmar
K 60 – Butyl Adhesive Tape
K 60 – Butyl Adhesive Tape
The carrier is a polyethylene mesh that is coated on both sides with highly cross-linked, hot-calendered butyl rubber. Application area: For permanen...
DE-65606 Villmar

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play