ball made Germany

...Material: Plastic sleeve. Ball made of stainless steel 1.4034 (equivalent to AISI 420). Spring 1.4310 (equivalent to AISI 301). Design: Hardened ball. Note: Spring-loaded pressure pieces are used for indexing and positioning, as well as for pressing on and off.

...Belven is a manufacturer of swivel valves based in Belgium, operating for over 40 years. As a leading distributor, Ahrendt Industrial Valves also carries out the automation of the valves with pneumatic or electric swivel drives in its own workshop. In addition to the Belven shut-off valves BV10 and BV12, high-quality Belven ball valves type BV4 made of steel and stainless steel are also available, featuring extensive certifications such as ATEX, Nace, TA-Luft, ADR, and SIL or fire safe.

...Construction This Schulz ball roller consists of a housing and a cover made as a stamped part, a load ball, and several support balls. In common parlance, these ball rollers are also referred to as UFO or Saturn ball rollers due to their design. Sizing The division is determined by dividing the shortest edge length of the conveyed material by 3.5. Materials Housing: Galvanized steel, stainless...

...Since 1999, we have been manufacturing ball-catching curtains in-house, perfectly color-matched to the two-tone tennis surface, giving an old tennis hall a fresh new look. The ball-catching curtains are custom-made in our facility from high-quality polyester fabric (fire class B1). They are hung using carabiner hooks on steel cables. Renovating your tennis hall with a two-tone tennis surface and...

...Your internal geometry ensures very high axial stiffness, while a split and matched inner ring configuration provides a play-free installation condition for the axial angular contact ball bearings. Features of the ZKLN bearings: - Typically made from chrome steel rings and steel balls. Other materials (e.g., X65Cr13 or X30CrMoN15-1) are also available, as well as hybrid versions with ceramic...

...Ball bearings made of stainless steel...

...The full ceramic bearing is made of 100% ceramic material. The inner ring and outer ring are typically made from zirconium oxide (ZrO2), while the balls are made from silicon nitride (Si3N4). The ball cage is made from particularly low-friction Teflon. High-temperature bearings can also be supplied without a ball cage. The bearing is fundamentally open on both sides and can be cleaned very...

...Instrumentation Ball Valves for Gas and Liquid Applications The 2- or 3-way ball valves of our BV series are made from a stainless steel forged body and feature a floating ball. This ball is secured between two packing half-shells. This design feature helps reduce wear. Various packing and sealing materials are available as options for maximum working pressures of up to 414 bar and temperatures up to 232°C. Control panel nuts are pre-assembled as standard. Standard materials include stainless steel 316 or brass, with others available upon request.

...FSA Quality: Motorized ball valves made of brass for irrigation, with stability against a variety of liquids. Control: A detailed manual is included in the delivery. Further information on control is available in the section below. Advantage of the motorized ball valve: Low power consumption, high flow rate, 3-way variant available. Application areas: Switching speed is not critical, suitable for...

...Franke bearing asseblies type LVC are bearing assemblies made of steel, designed as double row angular contact ball bearings with integrated bearing elements. Franke LVC are suitable for highest circumferential speeds. They convince by very high dynamics and a very low rotational resistance. The double row angular contact ball bearings in a 4-point arrangement are preloaded. They are insensitive...

...Measuring inserts are required for two-ball measuring devices and for measuring dimensions over rollers. Measuring balls and measuring roller inserts Measuring inserts are required for two-ball measuring devices and for measuring dimensions over rollers. FRENCO measuring inserts are always made of carbide (1500HV) to minimize wear. Measuring rollers are used for the dimensional inspection of...

...We manage and automate a comprehensive range of industrial valves. We are your competent contact when it comes to automation under complex requirements! - Ball valves made of stainless steel, brass, or steel - Shut-off valves with PTFE or soft sealing - Slide valves - Check valves - Special valves etc.

...Ball valve, metal sealing, for highly abrasive media in solid, paste, liquid, or gaseous form and media with highly corrosive characteristics Custom designs, special execution...

...Single-piece compact ball valve with flange connection, full bore Size (DN - inches): DN 40 (1 1/2")...

... • Lifting platforms • Conveyors • Processing machines for stone and ceramics • Transport systems for containers • Sliding walls and doors • Robotics • Electronics • Shelves in Kanban systems • Cutting presses • Casting machines Typical temperature ranges are between -30°C and 100°C, with the 100°C being considered only as short-term peak values. However, there should be no issues with applications at sustained temperatures of 70°C. For high-temperature applications above 100°C, we recommend load balls made from AISI 420C and certainly not...

... ball vibrator starts immediately, requires no lubrication, and is self-cleaning. The BD type is made from lightweight die-cast aluminum in three sizes. The only moving part - a steel ball - is driven by compressed air at an extraordinarily high speed on a hardened ball race. This causes strong, high-frequency vibrations in all directions. After installation, this vibrator operates for years without any maintenance. Our ball vibrators are used in the following industries: conveyor technology, dosing, weighing, and screening technology,...

...Dosing system DB 10: lubrication made easy The dosing system DB 10 uses a pressure vessel with a capacity of 10 litres. This is equipped with a filler ball valve and plastic funnel, a pressure regulator with bleed screw and a safety pressure relief valve. A float switch is fitted to regulate the fill level. There are two dosing valves on the underside. This dosing system is available in the following versions: DB 10 H – with poppet valve DB 40 – with 40 litre reservoir DB 40 H – with 40 litre reservoir and poppet valve...

...No-crush roll made of polyurethane with hard core as well as ball bearing. This ensures enormous flexibility - an ideal application in the paper industry. Furthermore, different diameters as well as profiles are possible. The recovery properties of the no-crush roll are determined by the profile and the hardness.

...Ball valves made of brass, steel, stainless steel...

... inside the container, pushing the liquid outward. This method prevents any contact with the liquid being transferred, except for the hose, discharge tube, and spout. A special valve prevents excessive pressure buildup (for example, due to sunlight), thus protecting the solvent pump. Quality Materials All parts of this hand pump that come into contact with the fluid being transferred are made of PTFE and stainless steel (1.4301, 1.4404), excellent inert materials known for their outstanding resistance to chemicals. Flow rate: 1.8 l/min Threaded connection: GL 45...

...made of stainless steel 1.4305, self-locking with mushroom handle PLACOGRIP® ball lock pin self-locking with mushroom handle For quick fixing, locking, adjusting, changing, and securing. Quick and easy to release for frequently repeated connections. PIN PART Stainless steel 1.4305 SPRING AND PUSH BUTTON Stainless steel HANDLE Black aluminum With attachment option for safety cord * Shear strength similar to DIN 50141...

... 3,000mm Straight and curved paths in one rail Sliders with four rollers, arranged in pairs, maintain the preload over the whole length of the rail Parts as per drawing, customized for each application The Curviline linear guides product family is used for all non-linear motion applications. The linear rails are available in two widths, and made to fit the customer’s design. A single rail can have...

...You are looking for ball valves, whether brass, stainless steel, or plastic. We offer a wide selection and are happy to assist you with your questions.

...The diaphragm dosing pumps in the MEMDOS MR series have been developed for a wide range of applications in dosing technology. They are ideal for use in industry, process engineering, water treatment and waste water treatment. Features: . Robust dosing head: Made of PP and stainless steel for high durability and longevity. . Precise dosing: Double ball valves (up to MR 290) and spring-loaded...

...Material Description: Sleeve Steel Strength Class 5.8. Ball made of steel. Spring Spring Steel Class D. Finish: blued. Ball hardened. Order Number Order Number Order Number: 03000-03 03000-203 03000-404 D D D: M3 M3 M4 D1 D1 D1: 1.5 1.5 2.5 L L L: 7 7 16 H H H: 0.4 0.4 0.8 N N N: 0.4 0.4 0.6 Initial Spring Force F1 approx. N Initial Spring Force F1 approx. N Initial Spring Force F1 approx. N...

... adjustment is made in 15° increments and can be securely locked against vibrations. The connection plate with ball joint guarantees process-safe friction due to a special coating on the ball and a unique clamping mechanism. A continuous swivel range of 60° is possible, allowing for optimal positioning of the display devices.

...Ball Valves - Flanged ball valve made of steel KS76.5 PN16 / KS76.6 PN40  ...

Horst Weidner founded the family business HWG in 1982 in Leonberg. Initially active as a trading house, increasing demands for special parts led to the establishment of our own production facility. To accommodate the growing space requirements, the company moved to Renningen in 1997 into a newly constructed building, where development, administration, production, and assembly were all housed unde...

... one side Both sides removable igubal® coupling bars configurator - Removable from both sides Removable ball pins Replaceable Customer specific dimensions and configurations can be removed and exchanged from both sides. maintenance-free Ball pins made from steel, stainless steel, plastic Easy assembly and disassembly of the ball pins by defined forces Configuration online Light weight...

... the incoming medium. During backflow, it is pressed back into the hard valve seat by force and its own weight, thus sealing it. The valve seat should be matched to the material used for the valve ball. For many specific application conditions, we have suitable materials made from elastomers and plastics available. In addition to standard dimensions, we can cover intermediate sizes with an extensive tool park.