single-phase asynchronous motors

... voltages or insulation class H on request - Stored speed: 3000 rpm or 1500 rpm or 1000 rpm or 750 rpm - Efficiency IE3/IE4 (tomorrow IE5) - Form B3-B5-V1-B14-B35-V15-B34 - Motors from size 56 to 160 - These motors can be equipped with options such as special sensors like PTO or PT100 - IP56 option - Standard motors equipped with PTC sensors - These motors can be equipped with options such as special sensors, purge holes, heating resistors, umbrella covers, specific epoxy paint - C3M- C5M - Three-phase forced ventilation (code VF) or single-phase (code VFW).

...Single-phase electric motors Cemer from 0.06 kW/0.09 HP to 4 kW/5.5 HP. Also available in construction forms B3 (feet) or flange B5 or B14. All with a voltage of 220V and efficiency IE1. Online sales throughout the Spanish peninsula www.motorelectricoenstock.com Technical advice at 964 626163...

...Motors with operating capacitors are two-phase asynchronous motors. Compared to motors with starting capacitors of the same size, they offer an increased power output by one level, a good efficiency, and a power factor close to 1. The starting torque of about 0.4 MN is sufficient for most applications, such as fan drives.

...The 4-pole AC asynchronous motors are available in single-phase or three-phase configurations in 4 flange sizes, with a power range from 6W to 200W, along with suitable gearboxes. The following motor versions: Induction Motors: 1 rotation direction Reversible Motors: 2 rotation directions, continuous brake Brake Motors: 2 rotation directions, holding brake Speed Control Motors: 1 rotation...

...Wide selection of three-phase motors and electric motors • Asynchronous electric motors IE1 - IE2 - IE3: 0.06 kW to 900 kW (some also available in UL/CSA versions) • Brake motors: from 0.12 kW to 55.0 kW - available with various brake types • Asynchronous motors with integrated frequency converter • Single-phase motors: 0.11 kW to 3.00 kW • ATEX motors: Ex e / Exd / Ex nA / IECEx • Stainless...

...Type EK Single-phase motors with operating capacitor. These motors are particularly suitable for machines that start easily, such as fans, pumps, and compressors. Type ERKK Single-phase motors with operating capacitor, auxiliary phase, starting capacitor, and current-dependent starting relay exhibit particularly favorable operating conditions for heavy starting. Application examples: conveyor screws, agitators, dosing systems.

La Moratto started its operations in 1978 as a company specialized in the winding of electric machines using the latest technologies. Since 1983, it has begun producing special electric motors and IEC/MEC series. Today, Moratto, under the ELMOR brand, is capable of meeting every request for three-phase and single-phase electric motors from construction size MEC 56 to size MEC 200. Upon request, it...

...single-phase, pole-switchable asynchronous motors...

...Three-phase asynchronous motors and single-phase capacitor motors operate at nearly constant speed. The design complies with EN 60034. Both types of motors are particularly robust against electrical and mechanical overload. Power range from 50 to 3,000 W. The motors are standardly protected by a temperature sensor integrated into the winding. Optionally, the temperature sensor can also be...

...*Step motors are also among the most commonly used motors in linear motion systems and CNC coordinate axes. They operate with step motion, making them more precise compared to servo motors. Due to their lower RPMs compared to servo motors, they operate at lower speeds. The power and torque that can be achieved are limited. *Asynchronous: They are generally used in conveyors and simple motion systems. Together with a reducer, they provide high output torque according to the selected gear ratio. Typically, three-phase groups are used, and single-phase types are used as needed.

...The Panasonic single-phase motors (single-phase asynchronous motors) are suitable for fixed speeds in the power range of 6 to 90 watts. The Panasonic single-phase motors (single-phase asynchronous motors) can be used for fixed speeds in the power range of 6 to 90 watts, for example, as brake motors in lifting applications. The entire series is characterized by smooth operation and high...

...- Circular saws - Vibrating screens - Centrifuges - Grinders and wheels - MFC Line of static braking modules with microprocessor control for three-phase asynchronous motors. - Brake 400 VAC single-phase 20/500 A - MFC onboard counter - MFR10-20 Line of static braking modules for three-phase asynchronous motors. - Brake 400 VAC single-phase 10/20 A - Suitable for motors from 5 to 10 kW (normal service) MFD Technical Features: The system automatically controls the motor's start/stop circuit, imposing the stopping and safety times of the cycle. It is also possible to...

...These EBMPAPST speed controllers feature an electronic device designed for centrifugal and axial fans. They ensure smooth, stepless variation of the rotational speed of the fans themselves, driven by asynchronous motors that can be adjusted in speed by reducing the supply voltage. Anti-interference and single-phase, they allow for the control of one or more fans according to the maximum...

...Frequency converters for speed control of asynchronous motors 0.25 to 7.5 kW, 200 to 480 V, single-phase and three-phase...

...The sequential shooting kit. Allows you to create GIFs and animated 360° views. This set includes a turntable and the control box. Do you already have a turntable? The control box allows you to operate synchronous and asynchronous single-phase motors from 100 to 230 Vac. You can find it here. Ref: P16LV20T16D40GIFBOX_C Load capacity: 80 kg Ø Rotating Part: 160 mm Ø Base Part: 400 mm...

...Windings for AC electric motors single-phase, two-phase, and three-phase single, double, triple polarity low, medium, and high voltage inclined slots for permanent magnets rewindings in housing windings primarily inserted by hand, especially for special and non-standard motors. electric traction motors in low voltage and non-standard windings mainly of medium and large sizes, up to MEC250.

...Single Stage Single-stage types are designed according to 8 bar pressure, two-stage types are designed according to 15 bar pressure and high-pressure types are designed according to 25-30 bar pressure. It is driven by V belt-pulley. Preferable as a chassis unit without air tank Preference to be able to start with mono-phase electric motors for the types with power up to 4kW Compressor...

...Lightweight - Maintenance-free (with aluminum pin caps) - Lifetime lubrication - Reversible Motor type: Asynchronous short-circuit rotor motor, IEC 34 (VDE 0530) Insulation class of the motor winding: Class B, IEC 34 (VDE 0530) Voltage: 230V / 50Hz (IEC 38); 115V / 60Hz (on request) Frequency: 50 Hz Shaft seal, internal: Double lip, NBR Protection class: IP64 Thermal protection: Bimetal switch Ambient temperature, single-phase motor: +10 to +40 °C Rated power, single-phase motor: 0.050 to 0.085 kW Rated torque, single-phase motor: 9.3 to 18.4 Nm Max. pipe length SL: 602 mm...

...-free operation and high efficiency, featuring an external asynchronous 3-phase or 1-phase motor depending on the model. The design of the KMS / KTS series also enables quiet operation and high air flow. Accessories: The optional speed control is continuously adjustable with a frequency converter for models with three-phase motors, as well as with a step switch for the 230V motors. Key data: Box dimensions W / H in mm 106 x 114 Air flow 1500 - 1650 m3/h...

...IPC presents the most comprehensive range of SMOKE EXTRACTORS available on the market. The available models are equipped with the following motors: - SINGLE-PHASE ASYNCHRONOUS MOTOR WITH EXTERNAL ROTOR 230V AC - SHIELDED POLE MOTOR 230V AC - INDUCTION MOTOR 230V AC - BRUSHLESS MOTOR 230V EC - BRUSHLESS MOTORS 12V AND 24V DC "Air tight" versions are available with enhanced sealing on the shaft for hermetic stoves. The motors can be paired with a wide range of aluminum or steel scrolls produced by us.

Manufacturing of transformers, single-phase and three-phase versions, air chokes, iron core chokes, converters, linear motors, synchronous and asynchronous types.

...CME has been building and producing various types of electric motors since 1990, customizable based on the customer's application, such as: three-phase asynchronous electric motors, single-phase, high-efficiency IE2, dual-polarity, motors with inverters, self-braking, complete with Encoder, compact motors, and customer-designed motors. Our goal is to provide valid and durable solutions that meet market needs. CME is located at Via Martiri Di Belfiore, 5 in Cento, province of Ferrara.

...-site. We offer our expertise in the following areas: Single-phase asynchronous motors; Three-phase asynchronous motors; Multi-speed asynchronous motors; Brake motors; Alternating current motors; Direct current motors; Variable speed drives; Gear motors - reducers; Screw motors; Motor drums; Gear motors; Explosion-proof motors; Pump motors; Generating set alternators ...

Since 1945, alongside our traditional three-phase and single-phase one-speed asynchronous motors, we also manufacture various series with dual polarity and brake motors, including a range of high-efficiency motors certified to IE2 and IE3 standards. In addition to our European standard series, we offer motors certified according to North American regulations (cCSAus). Atex motors of categories 3G...

Samec is a company based in Albinea that specializes in the design and manufacturing of electric motors, stainless steel pumps, and various components. The company produces various types of products, designed according to standardized sizes or made to customer specifications, which include asynchronous electric motors, two-phase and three-phase, with powers ranging from 0.25 kW to 11 kW, in...

... motors and flameproof motors in various designs. In addition, we develop specific motors for each application together with our customers, always under the premise of the highest quality and best suitability for individual needs. Single-phase and three-phase asynchronous motors as standard motors and in special designs, three-phase motors from 0.05 to 250 kW with squirrel cage rotors for low voltage...

... required by the motor also determines the design with its specific advantages and disadvantages. The first rough classification distinguishes between direct current (DC) motors and alternating current (AC) motors. The latter are further classified according to the number of phases. In accordance with the supplying network, single-phase AC motors are also referred to as alternating current motors, and three-phase AC motors as three-phase motors.

...Design, development, manufacturing, testing, and maintenance of neutral to ground resistances up to 150kV and 3000A, AC & DC harmonic filter resistances for filtering, harmonic filter resistances for high voltage direct current (HVDC plants), starting or braking resistances for asynchronous motors, high voltage, single or three-phase disconnectors up to 500 kV, 5000A and 140 kA/3sec, contactors.

Startec S.r.l., an Italian company active since 1996, designs and produces electronic solutions for industrial and civil automation: - Drives, single-phase and three-phase inverters for controlling asynchronous motors, brushless, and direct current (power ratings from 0.2kW to 30kW) - User interface electronic boards and operator panels - Customizable control panels for civil and industrial...

Sales of Drive Technology Components Electric motors of all kinds Asynchronous motors Asynchronous motors for explosive environments Asynchronous motors for high-temperature environments Single-phase AC motors DC motors Permanent magnet synchronous motors DYNEO Generators of all kinds Gearboxes and geared motors of all kinds Frequency converters 0.25 – 2000 kW...