rotation motors

...Allows you to control a rotating platform or turntable to create 360° animated GIFs. Compatibility Motor: Maximum current = 2A from 100 to 230Vac. With motor powered directly at 100 to 230 Vac. With any motor powered through a variator or a power supply at 100 to 230 Vac, max 2A (you will need to adjust the control parameters of your motors and variators, Speed, Acceleration and Deceleration ramps to ensure that the detections have enough time to occur (nc)). The parameters of the Box are compatible with rotation speeds around 1 to 3 rpm. Ref: GIFBOX Length: 165 mm Width: 85 mm Height: 55 mm...

... eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack...

...Production capacity 200 kg (290 Lt) Flour capacity 133 kg 2 speeds, automatically adjustable (spiral: 1st Speed 111 rpm and 2nd Speed 223 rpm) & (Bowl: 15 rpm) 2 electronic timers for automatic management of each speed. 2 independent motors, one for the bowl and one for the spiral. Device for bowl tilting by impulse and reversing the direction of rotation of the bowl. Bowl Ø 900xh470 mm. Control...

... Payoff Reel with threephase motors for start / stop operation LMHDR Series Payoff Reel with threephase motors and frequency inverter for continuous operation Pneumatic hold down arms Electropneumatic brake systems Larger mandrel segments Conical mandrels Traveling feature Different mandrel heights Various expansion ranges Different back plate sizes Loop control systems...etc.

...N ° 1 Ellettari brand rotation head, Ek 1500 model Drive by 2 piston motors in closed circuit Internal 3-speed gearbox Floating shaft with internal passage 55 mm Adduction head with internal passage 60 mm Underhead flange with s '' 1 / "API or 3 '' 1 /" IF thread Max torque 1500 kgm Maximum speed up to about 500 rpm All new internal gears New bearings New gaskets The details of the...

...— Suitable for left and right rotation as well as intermittent, continuous, and pause operation — Optional: Customization of the output shaft — Optional: Double-sided shaft output Type: Worm Shaft Orientation: Angle Torque: 1 - 5 Nm, 5 - 10 Nm, 10 - 20 Nm Additional Features: for reduction gears, for wheels...

...radial and axial run-out accuracy. The rotary swivel unit RT2A is available in the size variants RT2A150/200 and RT2A100/150. Various stepper or servo motors can be used as drives. In addition, various types of end or reference point switches are available. The swivel range of the swivel axis can be individually defined, the rotary axis can be rotated without limit. Thus the RT2A rotary swivel unit combines all the advantages of a field-proven standard product with the flexibility of a special version.

...Electric Gear Pump Self-priming Pump Maximum suction height 5 meters Working temperature 110°C max Motor ATEX II 2 GD c T4 II B Rotation speed 1400 rpm Power 0.4 (JEV41EX), 0.75 (JEV51EX), 1.5 (JEV71EX), 2.2 (JEV81EX) Voltage 230/400 Volts three-phase Current 1.5 (JEV41EX), 2.2 (JEV51EX), 4.1 (JEV71EX), 5.1 (JEV81EX) Connection 3/4"F, 1"F, 1"1/4F Max. head 100 meters, 80 meters (JEV81EX) Specifications and Benefits Electric Gear Pump with ATEX motor FLUID: Diesel, Oil TECHNOLOGY: Gear ATEX: No PUMP TYPE: Equipped CONNECTION: 3/4"F, 1"F or 1"1/4F BODY: Cast Iron MECHANISM: Steel...

...The MSAC200 can be flexibly adapted to the client's design using flexCoder technology and provides precise absolute values for high mounting tolerances. It is always possible to customize the encoder and the magnetic ring for exact mounting, for example in motors. An additional feature is the high reading distance of ≤0.6 mm and the axial tolerance of ±0.2 mm, which facilitate the design of the...

... direction, tachometer Speed Control & Brake Motors: 2 rotation directions, tachogenerator, holding brake In each size category, there is a stock program available. Click the following link to view the stock program:...

...Power range from 1 to approximately 300 watts. These capacitor motors are particularly suitable for drives that are directly supplied from the 230V mains. The use of specially manufactured cage rotor rotors ensures a safe start-up of the motors. Advantages over shaded pole motors: Better efficiency Direction of rotation can be easily changed by swapping two wires. Advantages over...

...maintenance-free gel traction batteries, built-in battery charger, three-phase electric motors with inverter, height-adjustable guide wheel, front safety bumper. The FP GLOBO model is equipped with a folding arm with reel holder trolley.Keyboard lock Rotation speed adjustable from 5 to 12 rpm Up/down reel carriage speed from 1.3 to 5.4 m/min Turns at the base/top of the pallet from 1 to 10 Pallet height reading delay Film tension adjustment Film pre-stretch adjustment Reel change comfort cycle CYCLES SELECTABLE FROM Weight:Kg. 300 Overall size:mm. 1280x1850x1000h...

... executed. Lighting is permanently mounted on decorative elements. The swinging chairs and their supporting chains are made by stainless steel and fibreglass shells. The covering roof consist of decorative fiberglass globe. The rotation is made by one self-braking AC motors and lifting by two hydraulic pistons. Static dimensions:Diameter m.9,1 (29’10”) - Height m.6,9 (22’8”) Operational dimensions:Diameter m.15,6 (51’3”) - Height m.8,7 (28’7”) Maximum capacity:32 passengers Maximum passengers/hour:480 passengers/hour (4 min. cycle) Power Requirements:12,5 kW (5 kW Led Lighting – 7,5 kW Motive Power)...

...Installation is simple as no chain or belt drives or gear reduction motors are required. Pumps can be directly connected to standard speed lowcost electric motors. By simply changing the shaft rotation, pumps can be used to pump in or out through the same piping. Pump model on baseframes with motors:MC-3-SS / MC-3-SS movable Motor size:5.5 kW (7.38 HP) RPM 50 Hz:1‘450 RPM 60 Hz:1‘740 Voltage:400/440 V, 50/60 Hz, 3 ph other voltages on request...

... anodized. Installation onto a fixed theater pipe 48,3 to 50mm diameter (other fixing method on request). Tab Tensioned Screen Surface (optional). Most of our PVC fabrics can be fitted into this system. Integrated motorization 220V 2 Somfy motors with 5 years warranty. Motor torque: 110 Nm. Rotation speed: 17 revs/min. Rising speed: +/- 10 cm/sec. Equipped with 2 adjustable end stops. The Nolimit can be shipped in one piece up to a maximum of 12 metres wide, in a wooden box especially provided for this purpose. Color of the casing:black anodized.

...Machines designed for packaging liquid or dense food products in jars and bottles, for dosing sauces, gravies, mayonnaise, fruit juices, syrups, purees, yogurt, kefir, and milk. Equipped with dosers featuring rotary pumps made of AISI 304 stainless steel, motorized with electric motors and controlled by inverters. Dosing and rotation speed are adjustable via an electronic pulse counter set...

...dryve motor control - connect & control... Operate DC motors wear-free in left/right rotation - very easy with the new control for drylin® E drive systems from igus®. drylin® D5 for DC motors -Ready for immediate use. No parameterization or programming necessary - Left/right run via digital input - Velocities & accelerations via external PWM input signal - Available with and without housing - Inexpensive - Free pattern programs Protection class:IP20 Motor type:DC Motors...

...Submersible pumps with agitator for charged and abrasive mixtures. High capacity version for great performance. Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% per weight material density Accessories: High depth kit Algae cutting blade Humidity and temperature sensor Jet Ring system Electric pumps are available in 50Hz...

...• The classic pipe wrench • Teeth opposing the direction of rotation • Narrow S-shaped jaws • With 45° angled jaws • Three self-locking support surfaces on the pipe • Continuously adjustable • Red thermolacquer • Made of chrome vanadium steel, forged, oil-hardened Length in millimeters: 340 Weight in grams: 965...

...Torque motors, rotary tables, rotary axes, swivel units, accessories The rotation units from Isel are used in many different CNC machines. They are often employed as the 4th or 5th axis in CNC milling machines. The compact rotation units are precise and reliable, and they can be driven by either a servo motor or a stepper motor. After a thorough technical consultation, we will put together the optimal offer for you. From users for users Contact our sales team now by phone or send us an email. We are happy to assist you! Tel. 0892101390 Email: info@tbm-muenchen.de...

... and adjusting screw tools such as torque wrenches, screwdrivers — Testing screw connections Drag torques in motors and pumps: — Friction torques in gears, bearings, and seals — Testing of torsion springs — Adjustment mechanisms in the automotive industry (sunroofs, window lifters, ...) On the steel-made sensor element, strain gauges (DMS) are applied to the torsion shaft, which are connected in...

...rotation monitoring sensors and inspection hatches with overflow sensors. Drive shaft, on which flywheel is installed, is mounted in high-quality self-aligning ball bearings (SKF or SNR) Thanks to its construction tensioning section ensures constant optimum chain tension. Intermediate sections have length of 2000 mm as standard, but if necessary, section with non-standard length can be made. Bottom...

... surface, high blade durability, and a long lifespan for the saw. + Sensitive blade descent thanks to the safety ratchet lever + Comfortable angle adjustment with fixed stops + Powerful two-speed drive motors + Oversized gearbox with EISELE rotation compensation system for a long tool life + Sturdy machine frame for low-vibration sawing processes Type: stationary Technology: circular Material processed: for metals Applications: for profiles, for tubes Other features: vertical, with cooling system, hydraulic, pneumatic, heavy load, versatile...

... high programming functional capacity by using a three-dimensional graphics software. Electro-welded base designed to grant maximum rigidity and functional capacity of use. The axis slide on precision profile guides with ball recirculation and are driven by motors operated with digital systems. The vices slide on ball recirculation screws, and can be positioned manually by referring to a mm-scale and a laser pointer. By using the disc cutter it is possible to carry out end-milling operations on both the ends of the work piece (end-milling cycle). Milling operations can be performed with...

...]":8,"Reference":"150412702","Vibration [m/s²]":"< 2.5","Rotation speed [min¯¹]":32,"Bearing":"Coupled","Air exhaust direction":"To the rear","Noise level [db (A)]":75,"Weight [g]":365,"0000":"","Air consumption [l/min]":400,"Max. tool holder Ø [mm]":6,"Power [W]":200}}...

...The soundproofing enclosure for centrifugal fans reduces noise, vibrations, and all other sound emissions caused by the rotation speed of the motors and airflow. Main features: Made of galvanized steel (can be painted in a RAL color of your choice) Double layer of acoustic felt, 20 mm thick, supported by perforated sheet metal Motor cooling grille with terminal cap Inspection door with access handle Possible options: Flexible sleeves, Anti-vibration mounts, Connection pieces for intake and discharge. Brand: Aspirelec...

... rotation controller. Silent operation thanks to dynamic step resolution inversion. Controlled via a simple I/O interface, with 31 configurable and accessible positions. The control can be quickly and easily configured using the software. The software and programming manual for the positioning control are available for free download. When selecting, it is not enough to determine the right motor based on holding torque, as the motor torque decreases with speed. Reference: 85000-10 Temperature range: 0 °C to +50 °C...

... of the additional air function. Holding torque:76 Nm Operating pressure:4 bar Shaft Diameter:50-0.01/-0.025 mm Clamping cycles:1,000,000 Mounting:In any position Material:Hardened fine-grain structural steel, inner bore ground Pneumatic medium:Dried, filtered air Operating temperature range:10 °C to 45 °C Application field:Drive shafts, Torque motors, Conveyor systems...

...Insulation class F Flat cable 4x4mm² L= 3.5m (4Kw 22Kw) 4x8 mm² L= 3.5m (30Kw 37Kw) Maximum number of starts per hour 20 Maximum ambient temperature 30° C, water pH 6.5 8.0 Minimum cooling speed: 0.20 m/s Rotation: clockwise / counterclockwise Maximum immersion depth: 350 m.

... safely. For this purpose, the cogging torque of the permanent magnet poles is measured over one revolution depending on the angle of rotation. Acquisition of torque via rotation angle Graphic recording of the test sequence Storage of the test results in Excel Simultaneous viewing of up to 20 variable test sequences from the database, shown in color. Variable test speed Reproducible test process thanks to constant speed independent of torque.