rotation motors

... stress High-quality thrust bearings that operate in both rotation directions and possess a high load-bearing capacity - Water-lubricated radial bearings for a horizontal and vertical motor application - Windings for temperatures up to 80° C of the pumped medium available - Speed regulation between 30 and 60 Hz via frequency converter possible - High-quality materials for application in service, industrial and seawater PERFORMANCE RANGE (AT 50 HZ) Up to 45 kW/60 HP with 6" motors Up to 132 kW/175 HP with 8" motors Up to 220 kW/300 HP with 10" motors Up to 400 kW/550 HP with 12" motors ...

... capacitors. A multi-slot stator field with an embedded three-strand winding, together with the operating capacitor (KD series), generates the rotating field for optimal efficiency on the ball-bearing rotor, which acts as a short-circuit rotor. Both series can be operated at 50 Hz and 60 Hz, and the direction of rotation is reversible.

...The EDAG PP9810 Motor Power System (PP9810 MoPS) can be used to control up to five DC power motors. It is employed in prototype vehicles. With minimal effort, new seat adjustment or window lift functions can be implemented. It is possible to regulate speed, rotation direction, and blockage detection through current consumption. Two variants of the PP9810 MoPS are available: one variant with 5...

... traction sector. Brushless synchronous motors with up to 25 kW of power outperform conventional electric motors in many ways. With their flat design, small size, and low weight, these robust motors have proven their effectiveness across a wide range of applications for decades. Unlike the PMS F series, the standard version of the PMS motors is equipped with two stators. Reference: 130-101 Condition: New Power: 1 kW Rotation Speed: 3000 rpm RMS Current: 32 Arms Nominal Torque: 3.2 Nm...

... Direct battery emergency drive in the event of a power failure High starting torque The DC motor consists of a stator and a rotating part, the armature, separated by an air gap. The armature is wound with coils that are connected to a commutator. The polarity of the armature winding is changed during the rotation via the sliding contacts (carbon brushes) that run on the commutator, thereby generating a constant torque...

...Electric Gear Pump Self-priming Pump Maximum suction height 5 meters Working temperature 110°C max Motor ATEX II 2 GD c T4 II B Rotation speed 1400 rpm Power 0.4 (JEV41EX), 0.75 (JEV51EX), 1.5 (JEV71EX), 2.2 (JEV81EX) Voltage 230/400 Volts three-phase Current 1.5 (JEV41EX), 2.2 (JEV51EX), 4.1 (JEV71EX), 5.1 (JEV81EX) Connection 3/4"F, 1"F, 1"1/4F Max. head 100 meters, 80 meters (JEV81EX) Specifications and Benefits Electric Gear Pump with ATEX motor FLUID: Diesel, Oil TECHNOLOGY: Gear ATEX: No PUMP TYPE: Equipped CONNECTION: 3/4"F, 1"F or 1"1/4F BODY: Cast Iron MECHANISM: Steel...

... descent controlled by pressure regulators. This system is integrated into the arm, eliminating the need for pistons and making maintenance virtually non-existent, as there are no wear components like those found in piston arms. - The rotation of the polishing plate is powered by high-quality Siemens electric motors, each with 10 hp. Conveyor belt made of PVC, providing greater protection during...

...For training the threaded rod in rotation - with maximum volumetric power, thanks to a new winding technique. The motor shaft is a blind hollow shaft. The threaded rod and the motor are connected using an expandable hub.

...Structure: metallic gray varnished steel Ral 9007 or Ral 1013 cream. Machine mounted on wheels with small stabilizing feet. (IRIS 30 and 40 mounted on wheels with brake). Standard motors: for mixtures with at least 55% hydration. Transmission: double return. Control panel: electromechanical with 2 timers with digital display. Inversion of the bowl's rotation in 1st speed except for models 30 and...

...The modular flanges allow for the combination of different motor and gearbox sizes alongside standard combinations to meet specific requirements. Gearbox characteristics at a glance: - Low backlash - High output torque - High efficiency - Low noise - Highest quality standards - Any installation position - Lifetime lubrication - Same direction of rotation - Additional options available upon request Advantages of the HMD motor-gearbox combination: - Compact length - Low moment of inertia - Low weight - Quiet operation - High efficiency Flange size: 60 mm - 80 mm...

... operating speeds of over 4000 rpm while maintaining enough torque to perform useful work For stepper motor operation with high inertia load, a connector is provided for connecting an external braking resistor. The SMD‑4.2DIN ver.2 driver provides both pulse position control and analog speed or angle control. Microstepping mode - 1, 1/2, 1/4,1/8, 1/16, 1/32, 1/64, 1/128 Control methods: - Pulse position control (STEP/DIR) - Analog speed control (0 ‑ 5 VDC or potentiometer) - Analog control of rotation angle - tracking mode (0 ‑ 5 VDC or potentiometer) - Constant speed rotation...

... - planer tables 250 mm Length of planing table 600 mm Jointer guide inclination 0 - 45° Planing height 190 mm Diameter of spindle 75 mm Number of knives 3 Disengageable feed speed 8 m/min Max chip extraction jointer 4 Max chip extraction planing 3 Spindle rotation 4000 rpm Diameter of suction nozzle 100 mm Working height 1080 mm MORTISER WESCOTT type chuck 0 - 16 mm Vertical table stroke 80 mm...

...Axial brushless electric motor AX Drive. Features: 1 High specific capacity and torque values. 2 Possible frameless use. 3 Possible control of rotation speed in a wide range. 4 Low weight, which does not significantly increase the spring weight. High torque values allow using this electric motor as a gearless drive, what significantly reduces capacity losses, weight, complexity and further maintenance ratio. Warranty period: 12 months. IP Rating:p65 Peak capacity:290kW Warranty period :12 months...

... size of the system near the working region is reduced to 90 mm. Stepper motors, that turn the two magnetic subsystems, are located on the sides of the casing Working bore diameter:36 mm Size of the homogenous field area:Ø20 х 20 mm Maximal field:1.05 T System mass:40 kg...

... unlocking input ensures additional safety for positioning (optional). Nominal torque / Nominal rotation speed: 1 .. 10 Nm / 30 .. 0.25 rpm Analog setpoint value: 0 .. 10 V, 0/4 .. 20 mA Number of rotations (adjustment range): maximum 50 Degree of protection: IP 55 Output shaft: 12 mm solid shaft Power supply voltage: 24 VAC...

...Continuous force up to 250 N - Peak force up to 2000 N - Stroke up to 600 mm (beyond available upon request) - Sections 66 and 88 mm - Integrated encoder and temperature sensor - Integrated guides - Stainless steel rod - Repeatability +/- 0.05 mm - Integrated linear motor - Power supply 220 Vac and 3 x 400 Vac - DIN ISO 15552 version (GDI series) - Optional: anti-rotation, holding brake...

...Multipoint injection, specific AAC & intake manifold, single ignition - These engines with displacements of 627 and 997 cc deliver a continuous power of 35 hp at 4640 rpm, and 52 hp at 4370 rpm. They feature helical reducers of 1:1.77 and 1:1.65, providing a propeller rotation speed of 2,620 rpm / 2,650 rpm, and they weigh 35 kg and 53 kg respectively. They are all equipped with multipoint...

...Available rotation angles up to 240° End stop adjustment +/- 10° Supply pressure up to 250 barg Mounting according to ISO 5211 Accessories according to VDI/VDE 3845 ATEX II 2G/D Available with micro hydraulic unit Body, hydraulic cylinders, and flanges made of aluminum 6082 T6 Spring housings in aluminum AS7G06Y33 (DIN 3.2384) Pinion and rack in stainless steel DIN 1.4057 QT900 Maximum rotation angle: 110° (standard) Supply fluid: hydraulic oil (freshwater or seawater upon request) Other manufacturing materials: steel, stainless steel...

...in flat construction / with mounting flanges Design B3 Protection class IP 54 Speed 2800 RPM Operating mode S 6 -40 % duty cycle Saw blade mount 29.95 mm Standard coating: RAL 6011 or 7031 All motors with EMG double surface brake (IP 20), saw flange, and thermal protection Right-hand rotation with M 20 left-hand thread (left-hand rotation available upon request) Delivery time: short-term possible...

...TR-KB Series 1. Capacities range from 15,000 to 60,000 kilograms. 2. Superior worm gears reducer designed to provide high torque and low backlash. 3. Synchronized AC inverter drive control for two motors. 4. Metallic rollers bounded with natural rubber. 5. TR-KB series designed with symmetrical roller for quick and accurate centering adjustment. 6. Adjustment bolt for different work...

... compactness and homogeneous dough. The arm and its rotation system are designed with a unique shaft shape that increases the amount of oxygen incorporated into the dough while also reducing the working temperature. There is the option to reverse the bowl's rotation, allowing for both large and small quantities of dough to be mixed on the same machine.

...Torque hub motors are state-of-the-art hub motors. The torque hub motor is an electric motor designed to lift a spindle through the rotation of a spindle nut. Torque hub motors utilize the principle of reluctance motors. High torque at relatively low motor weight distinguishes this innovation. This torque hub motor can be operated on the grid and with commercially available frequency converters...

...Technical Data Vision Models Maximum power Honda 9 Kw / Vanguard 12 Kw gasoline. Rotation speed Honda (13HP) / 3600 rpm - Vanguard (16HP) / 3600 rpm. Electric starter with recoil. Hydrostatic transmission with 2 variable pumps and 2 hydraulic motors. Track width 180 mm. Number of lower roller designs 3. Automatic track tensioning, with adjustable spring. Heating exchange • Easy coupling PTO...

...{"Max door length":"2200mm","Min-max door width":"600-1000mm","Max door thickness":"60-60mm","Power milling":"3 motors 0.37kW-3kW","Knife rotation speed":"1200 rev/min","2 vertical motors":"1.1kW","Number of hinge milling":"4","Dimensions":"2550x2300x1650mm","Power supply":"380 V","Weight":"1100Kg"}...

... Additionally, by using a frequency converter, the rotation speed can be adjusted at different stages. The anchor with scrapers helps to homogenize the temperature in processes involving heat transfer. Very suitable for thermal exchange processes.

... heating. The unit has an inlet hopper where the product is directed to the brittle bar line machine. The mixed product is then directed to a series of rollers, where the user can adjust the cutting height. The shaping and forming rollers are controlled and subsequently synchronized with motors. The size of the brittle bars can vary according to user needs, and the blades are designed to cut accordingly. A horizontal pneumatic sharpened cutter is used for cutting the brittles at regular intervals from a specific system.

... the respective motor. Digital encoder Suitable for positioning tasks Rotation direction recognition Speed information from number of pulses per time unit The standard solution for many applications DC tachometer Not suited for positioning tasks Analog speed signal Rotation direction recognition Resolver Analog rotor position Analog speed signal For special solutions in conjunction with sinusoidal commutation in EC motorsFor direction detection with analog speed signal.

... videos and photos, and insert text. The robot has 6 drive wheels and can move at speeds of 0 to 35 meters per minute. With dual motors, it can turn left and right. Front Camera Head Sensor: 1/4 CCD Sony, resolution 530 TVL Rotation: horizontal 360° / vertical tilt 270° Zoom: 120× (10× optical, 12× electronic) Powerful LEDs + additional lights Protection: IP68 Robot Operating range: DN200 to DN2000 Electric lifting Max power output: 160 W Climbing capacity: 45° Speed: 0 - 35 m/min 6 drive wheels...

... bending process. – Hydraulic straighteners: * Designed and manufactured with the capability of movements in three directions. All movements are hydraulic. * Mounted in special graphite bronze plates * Made from solid steel and treated with induction hardening – Control panel: all machine movements can be controlled from the control panel Maximum section module: 210 cm3 Roller diameter: 460 mm Upper shaft diameter: 180 mm Lower shaft diameters: 160 mm Motor power: 15 KW Rotation speed: 0 – 7 m / min Length: 2400 mm Height: 1695 mm Width: 2000 mm Approximate weight: 9250 kg...

...cyclone 075 dc / 300 ac - stirrer drives with magnetic coupling Torque range: 75, 300 Ncm Temperature range: - 50 °C to + 400 °C Pressure range: full vacuum - 500 bar / 6000 psi Stirrer speed: 0 - 2000 / 3000 rpm Materials: stainless steel, Hastelloy®, Tantalum, Titanium, ceramic etc. Buchiglas magnetic stirrer drives (cyclone) are produced for the mixing of chemicals of low to high viscosity in pressurized lab reactors. Cyclone type magnetic stirrer drives have integrated motors and controllers for the stirrer rotation speed.