sulphuric acid

...Professional liquid pipe unblocker. Rapidly eliminates impurities and residues in tubes and drains. High sulphuric acid content, 98%. Complies with REACH requirements. Registered exposure limit (for use as a pipe unblocker). ...

... plate with lead selenium grid alloy (cage design) Separators:Microporous plastic separators with fiberglass mat Container:High-strength transparent SAN (option: available in Flame Retardant PC UL94 V0) Lid:Opaque gray ABS (option: available in Flame Retardant ABS UL94 V0) Electrolyte:Diluite solution of sulphuric acid SG1.240 ±0.01 at 25°C Electrolyte reserve:Maximum availability over the plates...

... elemental form, although this method has declined over the last decade to less than 2% of world production. Today most elemental sulphur is obtained as a co-product recovered from oil and gas production in sweetening process. Despite this, our company can offer both, sulfur obtained as a by-product, and sulfur mined in its elemental form. Depending on the needs of the client, we sell it in liquid or granular form, or in the form of a lump. Sulphur is the primary source in the production of sulphuric acid, the world’s most widely used chemical.

...Flexible seal made of highly adhesive polyurethane (regenerating) on one side. On the second side, this sealing plate is made of a coated fabric that is compatible with most chemicals and hydrocarbons, except for sulfuric acid, which causes material shrinkage upon prolonged contact. This drain protection is washable (with soap or detergent and warm water to facilitate the regeneration of the...

...Forced draft cooling towers are specially designed to handle zinc sulphate solutions or highly corrosive liquids. They are equipped with distribution in highly resistant material.EFFECTIVE DESIGN COMBINING performance easy access for easy maintenance - sprayers are accessible without scaffolding and removable minimization of drift losses: 0,001% and lower. SUITABLE FOR HIGHLY CORROSIVE LIQUID WITH 200gl/ sulphuric acid, Presence of fluorine, Crystallization of gypsum...

...PEEK (Polyetheretherketon) has a very good resistance to acids, alkalis and solvents excluding excluding sulphuric acid. Additionally PEEK has a very good mechanical stability and is temperature-resistant in the range from -65°C to 250°C...

...These packages are tailored to suit our clients’ requirements while adhering to European Standards, Ciria and HSE guidance. We engineer solutions to integrate into existing or new sites and can also provide packaged, standalone systems which are largely independent of the main plant. We provide solutions for chemicals such as sodium hydroxide, sulphuric acid, hydrochloric acid, ferric sulphate...

...Powerful industrial drain cleaner. - Instantly dissolves all organic matter. - Fast and economical. - Effective due to its density. Physical state: Liquid containing more than 95% sulfuric acid pH: 0.1 Density: 1.830 kg/l (20°C) Solubility: Completely soluble Item number: MBI002-14 Packaging: 12x1L/carton Unit: 12 Unit(s)...

...PEEK plastic raw material is a chemically inert compound that does not dissolve at room temperature in any traditional solvents, except for 98% sulfuric acid. Its solubility in water (at room temperature) is 0.5 mass percent. Its elasticity modulus is close to that of dense human bone, but not entirely equal to it. The melting temperature of PEEK is 334 °C, the crystallization peak temperature is...

...Anodized aluminum is durable and resistant to weather influences. Because it requires minimal maintenance and retains its character, it is excellent for decorative applications. In conventional anodization, the surface is transformed into an oxide layer through an electrochemical process using sulfuric acid at room temperature. The resulting scratch-resistant and non-peeling layer is between 5...

...Buckthorn Powder The buckthorn plant has been used since the period of the Hittites in Anatolia. From the dyes present in the berries of the buckthorn, yellow, green, beige, and khaki colors can be obtained using various mordants such as alum, bluestone, sulfuric acid, common salt, bichromate, lime and tin salts. Its also called sea buckthorn. The insignificant greenish-yellow flowers produce...

...The fermentable carbohydrates from sugar cane or sweet sorghum may be directly utilized in the form of cane juice or in conjunction with a sugar factory from molasses. Cane juice is prepared by crushing / diffusing the raw cane and after extraction, clarifying with milk of lime and sulfuric acid to precipitate the inorganic fraction. The extract may then be evaporated to the desired...

... alcohol at 20 °C - 96.50 4. purity test with sulfuric acid - performed correctly 5. oxidability test at 20 °C for 25 minutes 6. mass concentration of aldehydes converted to acetaldehyde in anhydrous alcohol, mg/dm3 - 1.7 We cannot provide a fixed price, as the products depend on the season and stock prices. Please contact us.

...Type 437 is a solvent-free, 2-component high-performance polymer composite material. The extremely tight bonding of the polymer structure gives the system exceptional chemical resistance. It is used to protect concrete and steel surfaces, for example against acetic acid, hydrochloric acid, nitric acid, and even concentrated sulfuric acid. Rechem is applied wherever aggressive chemicals are used: in tank coatings, concrete surfaces, concrete floors, and similar applications. Type 437 can be applied with a brush, roller, or 2-component hot spray system.

... styrene-acrylonitrile (SAN). The material is highly resistant to non-oxidizing acids such as hydrochloric and sulfuric acid up to 70% concentration, saline solutions, liquid hydrocarbons, alcohols, and concentrated alkalis.

...Dytex Adhesive and Activator for Sulfuric Acid >93% - 96% Upon request, we supply Dytex adhesive from GF for the materials PVC-U and PVC-C. Dytex is a specialty adhesive for sulfuric acid >93% - 96%. Along with the adhesive, you can also obtain the GF Dytex special cleaner/activator from us. If you have any questions about the products, we are happy to assist you.

...Clean Business We ensure clean surfaces. In our Konti spiral pickling process, oxide layers or rust are completely removed using sulfuric acid. This prepares the strip optimally and can be further processed directly by us if desired. It is also possible to re-pickle strip steel that has become rusty and shows water spots due to long storage or weather influences. Often, this allows the material to be returned to its originally intended use without the need for declassification or scrapping. The goal: A clean material as the best prerequisite for subsequent processes.

...Hard anodizing describes a finishing process in which an aluminum component is immersed in a sulfuric acid electrolyte, allowing an aluminum oxide layer to form on the aluminum.

...Eloxal is a coating for the functional as well as decorative refinement of aluminum materials. The aluminum oxide layer is formed using direct current in a sulfuric acid electrolyte at approximately 18–20 °C. The workpiece is connected as the anode, and during the treatment, the surface of the workpiece is transformed into an aluminum oxide layer. The resulting porous (dense), hard, and wear-resistant surface is firmly bonded to the base material. Through special densification processes, the pores can be closed, significantly enhancing corrosion resistance.

...The typical chemical attack of biogenic sulfuric acid requires special robust remediation and coating systems. Our years of experience ensure durable and economical solutions.

...Ferrous Sulphate contains Ferrous Sulphate monohydrate and heptahydrate with the appearance of Off-white Powder and Light Green Crystal Powder or Granule, respectively, which is a byproduct when producing the Titanium Dioxide using sulfuric acid to decompose the ilmenite. It can be used in agriculture as fertilizer and feed additive to supply Micronutrients Ferrous. Chemical Formula:FeSO4•nH2O(n=1 or 7) Formula Weight:169.92 g/mol HS CODE:2833291000...

...Magnesium Sulfate is a chemical compound, a salt. It is a very useful chemical compound which is made by reacting magnesite or magnesia with sulfuric acid. Its chemical formula is MgSO4. ZnCl2 %:98 ZnO %:2.2 Fe %:≤0.005% Pb % :≤0.005%...

...The HDPE coating offers a top protection against high concentration chemicals, as well as against biologics risks Covered taped seams allow maximum impermeability face to splashing under pressure and sprays Elasticated thumb loop ensures a constant junction with the protective glove. The other end of the sleeve is elasticated Antistatic treatment on both sides to facilitate the dissipation of electrostatic charges Ideal protection against oil products, different acids such as nitric or sulfuric acid, fine powders, and waste water FABRICS ET SEAMS Hdpe and taped seams...

...Glossy Tin Plating. Properties: tasteless and non-toxic ductile good solderability corrosion-resistant in moisture and against weak acids and alkalis Applications: food industry electrical engineering and electronics mechanical engineering (bearing metal) We produce glossy pure tin layers from a sulfuric acid electrolyte. These layers have a decorative silver...

...DSD Chemtech, as a trading representative of MECS, offers a wide range of catalysts for all types of sulfuric acid production, sulfur plants, and gas purification.

...Turbo compressors and radial fans for various industries including chemicals, petrochemicals, oil and gas, refineries, and pharmaceuticals for the transportation of gases and gas mixtures. Processes in which our machines are used include, for example, acrylic acid, sulfuric acid, air separation plants, industrial carbon black, polyamides, laminate production, naphtha cracking, polyolefins (PP, PE), combustion air, and much more.

... work hardens slowly.It has good resistance to nitric and sulfuric acid solutions although it will not resist halogen acids. The alloy can be satisfactorily welded, brazed, and soldered. Available Sizes: SS 305 is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.050” (0.0127 mm to 1.27 mm) in widths up to 12.0” (304.8 mm). It is also available in foil as...

...Our services in the field of coating and surface treatment include: TWA, flame spraying, plasma spraying, nickel plating, electroplating. Our services in the field of coating and surface treatment include: - TWA - Flame spraying - Plasma spraying - Nickel plating - Electroplating - Blasting methods & mechanical texturing - Corundum blasting (AIOx and SiO2) - Wet corundum blasting - CO2 blasting - Ice blasting - Automatic texturing (patent pending) - Anodizing - Clean - Colored - Chromic acid - Sulfuric acid - Oxalic - Ceramaze®...

...For low viscosity acids and bases in industry - Lightweight manual pump for transferring products from barrels or tanks - Very powerful - Splash-proof, no seals - 230 V motor with 5 m cable and male plug - Pump made of polypropylene - Suitable for sulfuric acid (up to 40%), phosphoric acid, hydrochloric acid, battery acid, iron(III) chloride (up to 30%), caustic soda - Delivered as a ready-to...

...Phosphorus-alloyed copper ingot anodes for sulfuric acid baths. Dimensions The phosphorus-alloyed copper ingot anodes are manufactured in a rhombic shape with dimensions of 51 x 76 mm. Processing Additional configurations are possible: • End-threaded hole M 10 x 30 for the insertion of a hanging hook • Anode pre-configured for hanging with hooks according to requirements (various hooks made...