lifting beam

...The EBB type spreader beam consists of a rigid suspension and 2 articulated hooks. To manufacture this spreader beam, we need the following information: The maximum working load (MWL); The length C between the axes of the hooks; The maximum height H of the suspension. Standard spreader beams are...

...Specific lifting beam - 0.3 t SWL: 0.3 t...

...The clamp on the SBC profile allows for the quick creation of an anchoring point for lifting equipment, pulleys, or loads. Capacity: 1 ton to 10 tons. Adjustable spacing from 90 mm to 320 mm (10 tons). Adjustment occurs automatically as soon as the main screw is tightened onto the beam or profile. Product color: yellow. SKU: W-GRIFFE10T...

...FX-VV is the lifting magnet for profiles and hot components. The long, narrow design is intended for handling beams and profiles, even at the inner web of the beam, and achieves its maximum holding force even with relatively low material thickness, allowing for the safe lifting of thin sheets. Thanks to the 90° double prism, angle profiles can now be handled both internally and externally, or components can be turned. Steel builders rely on FX-VV.

...Lifting traverse for the maintenance of aircraft turbines, burned, welded, blasted, primed RAL 5017, and mechanically processed. Centering pins 25.4mm (1") shrunk onto flange connections using a hot air gun in a material-friendly manner. After the load test (crane test) with a test weight of 60 tons for later use on components up to 30 tons, the structure is pre-assembled and wired with limit switches, cylinders, etc.

...), leather, fabric, fur, PET, MDF, glass, stone, etc. Cutting : Wood, plywood, cardboard, paper, plastic, plexiglass (acrylic), leather, fabric, fur, PET, MDF, rubber, paronite, foam rubber The anodized blades prevent the laser beam from bouncing and hitting the laser head or the operator. The through table allows the CNC laser machine to process materials of unlimited length.

... operator and the people around. Choose the KEDY K10300 Rotating Spreader Beam for your next project, and experience the ultimate in lifting power and versatility! Capacity:50 tons Power source:Electric Rotating speed:2 rpm Rotation ability:360 degrees Certification:CE Warranty:2 years...

... adjustable head and foot sections, height adjustable Material: Multi-glued birch plywood frame laminated with Samerberg beech, solid cross beam laminated with Samerberg beech Slat width: 36 mm Slat thickness: 8 mm (standard) Features: Height adjustable, shoulder comfort zone, 5-fold hardness adjustment in the middle zone, load-distributing central strap, including mattress bracket for the foot end Maximum load capacity: 130 kg Beam height: 70 mm Construction height: 100 mm Motor: Dual motor, 2 x 4,500 N, standby < 0.4 W, plus lifting motor Available sizes: 80, 90, 100 x 190, 200 cm...

... durability are very important. The rope hoists can be mounted both on the ground and on an arm or beam. Two models of these scaffold hoists feature an extendable arm that can be adjusted from 90 mm to 1200 mm. These hoists must not be used for transporting people, and no persons should remain under suspended loads. Lifting capacity: up to 300 kg...

...Sensitive workpieces are transported through the blasting system using the lifting beam principle. Each workpiece is individually lifted, further processed, and gently placed down. The workpieces are either manually placed or reach the blasting machine on a conveyor belt and are automatically separated. The blasting process starts as soon as a workpiece reaches the entry threshold. It is...

...STURDY BIG BAG HOLDER Big Bag lifting beam with 2000 kg capacity suitable for lifting and handling the classic Big Bags 90x90x120 cm. The grip of the big bag is very safe and takes place by hooking it on the 4 corners. The lifting beam can be installed on the forks of a lift truck by placing it in the appropriate seats or it can be used with a crane or bridge crane. Load :2000 Kg Dimensions (LxPxH) :1070x1155x350h mm Forks seats :170x70 mm Distance between forks :650 mm...

...Hydraulic spreader beam with retractable suction cups and electric center of gravity adjustment. Function: The spreader beam ensures the demolding and tilting of concrete retaining walls. Service: The spreader beam is designed for outdoor use. Load capacity: Up to 4 tons vertically and 8 tons horizontally. Empty weight: 3.7 tons. Technical Description: One to three solenoid valves depending on selection. Suction cup: Multiple foam joint 50 x 50 R. Hydraulic tilting at 150 bar service pressure. Power supply voltage of 400V-50 Hz. Main client: CAPREMIB...

...1-Column Lift LW-Monolift 800 Description Special attachment with stable cross beam Adjustable drive rails with locking mechanism Self-folding ramps with plastic rollers Dead man's switch CE stop Automatic lubrication of the lift nut spindle system Ramp function with roll-off protection...

...This type of lifting beam provides excellent stability for the load and the beam together. The sling angle and the sling length can be adjusted to the available height. Other options: - Adjustable lifting beam. - Multiple lower slings (load distribution over several points). - Central pickup point with the same W.L.L as the beam: allows lifting from a single point without removing the beam.

...Workshop gantry CMU 2T movable under load Height under beam 2.27 m x Span 2.5m in galvanized steel Used equipment that has been in service for 1 month 4 swivel wheels made of polyamide, 2 of which are equipped with brakes Galvanized finish Compliant with current European standards Made in France SKU: 27436 Nominal load: 2000 Kg Beam width: 110 mm Wheelbase: 1500 mm Max lifting speed: 8 m/min Max steering speed: 10 m/min Weight: 350 kg Additional information: CUSTOM MADE, REQUEST ADVICE...

... transitions from one coil box to the next, end plates made from K-Therm ® AS 550 are also suitable. Applications: - Induction heaters - Induction block heaters - Medium frequency forging block lifting beam heaters - Inductive rod heaters/rod heating - Inductive pipe heaters - Bolt heating systems Other insulation for coils: - Insulation of coil windings - Coil cores, coil bodies - Electrical sheets, electrical coils - Coil carriers, coil frames - Insulation of the heating coil - Coil support...

... – are tested and have been proven over many years. They are individually configured according to the requirements of your process crane. The variety of application possibilities is virtually limitless. HCW hoist trolleys: Lifting solutions in the upper load capacity range MPW hoists: Coordinated modules, compact arrangement of motor, brake, and gearbox MPW hoist trolleys: Modular design, few interfaces, fixture-ready trolley frame Corner-mounted travel units KTL: Tailored single or double beam design with up to four wheels...

... not underneath but between the crane tracks. This means the entire crane has only the height of a single profile. This significantly improves the lifting height, allowing it to overcome tall machines in the transport area.

...All information at a glance: "Long Beams PT 2700 for Drum and Pallet Racks" Beam Length: 2700 mm Load Capacity per Pair: 1800 kg Profile Height: 95 mm Height Adjustable, Grid 50 mm Made from box-shaped profiles, plastic-coated RAL 5010 With welded, 4 mm thick hook plates With safety hooks to prevent accidental lifting Further links to "Long Beams PT 2700 for Drum and Pallet Racks" Questions about the item?

...Compact and light design, full loading on all sides. 4x safety factor against breakage in all loading axis. Rotatable 360°. Link swivel range max. 180°. The ball bearing allows the ring to rotate even under load. Lifting or securing loads, swivel rings have many uses. For the loading capacity to be valid it must be ensured that the ring is in line with the load. The swivel face must lie flat on the support beam and the screw must always be screwed in fully. Reference:07710...

... suspension with two or more simple or double lifting shackles, fixed or adjustable, equipped with hooks or other accessories that facilitate the connection between the spreader beam and the load to be handled. The main categories of spreader beams: - fixed spreader beam - adjustable spreader beam - H-shaped spreader beam - Big-bag spreader beam - precast slab spreader beam - turning spreader beam - spreader beam for forklifts - spreader beam spacers, modulift…...

...The Battery Telescopic Magnetic Traverse EPMBL-T with automatic telescopic arm is a fully battery operated magnetic lifting beam. It enables the mains-independent lifting and transporting of different sheet metal formats (up to 12 t) from 4 mm thickness. Flatload - SWL 3:1:4.000 kg Min. thickness:4 mm Lenght min. - max.:2.000 - 8.000 mm Width min. - max.:500 - 3.000 mm Weight:1.200 kg Item No.:74765...

...Special Cranes for Lifting Pipes or Steel Beams Model Roust & Bout The versatile boom crane that makes an operator perform like a team! Lifts 680Kgs Moves vertically and horizontally 2 winches operate the load lifting and the mast completely separately 2-speed load winches Infinite height adjustment for the load Ideal for outdoor or indoor work Quickly pays for itself with time savings on the...

...Finken vacuum lifter VH 10-1000 with telescopic longitudinal beam for the flexible transport of small and particularly large sheets and plates. Load capacity 1000 Kg...

...Electro Permanent Magnetic Beam with integrated Battery Group, with elastical suspension for perfect adaption on the steel Profile. Safety Factor of 4,8 For lifting of HEA-HEB-IPE-IPN Profiles between 80-600mm and max. length of 6.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air. HEA-HEB-IPE-IPN:80-600 mm WLL:1.300 kg Max. Length:6.000 mm...

...Vacuum beam, Year of manufacture: 2009 Vacuum beam; Lifting capacity: 2,000 kg; With adjustable pickup positions; Year of manufacture: 2009...

...Block clamps, beam clamps, lifting clamps, and other clamps for lifting and transporting loads. Available in force-locking or form-locking versions - upon request.

..."for workshop or construction site allows you to Transport, Handle, Turn over any glass surface from floor to ceiling. It can be used with our EV 300 electro-pneumatic lifting beam. Very compact construction. For very easy transport on site, it is possible to assemble it on the site of use" Ref:GRM 250...

...Our top quality and highly durable PORTAGANTRY is lightweight and extremely strong. This portable lifting system can be manually assembled, using just four bolts and can safely lift to 5000kg, making it ideal for multiple applications. This system offers an overhead anchor point for multiple users for fall protection, whilst also providing great versatility for lifting materials. Our PORTAGANTRY range is highly customisable to meet your specific needs, with a variety of A-frame height configurations and beam lengths available. ...

...PL – Lower Hook Model used when the lift height of the trolley is too low CDG at 1750 mm (check the load capacity of the trolley) PL – Upper Hook Model used as standard with the CP bin Lifting beam with 1 support leg for horizontal stability...