lifting beam Germany

...FX-VV is the lifting magnet for profiles and hot components. The long, narrow design is intended for handling beams and profiles, even at the inner web of the beam, and achieves its maximum holding force even with relatively low material thickness, allowing for the safe lifting of thin sheets. Thanks to the 90° double prism, angle profiles can now be handled both internally and externally, or components can be turned. Steel builders rely on FX-VV.

...Lifting traverse for the maintenance of aircraft turbines, burned, welded, blasted, primed RAL 5017, and mechanically processed. Centering pins 25.4mm (1") shrunk onto flange connections using a hot air gun in a material-friendly manner. After the load test (crane test) with a test weight of 60 tons for later use on components up to 30 tons, the structure is pre-assembled and wired with limit switches, cylinders, etc.

... adjustable head and foot sections, height adjustable Material: Multi-glued birch plywood frame laminated with Samerberg beech, solid cross beam laminated with Samerberg beech Slat width: 36 mm Slat thickness: 8 mm (standard) Features: Height adjustable, shoulder comfort zone, 5-fold hardness adjustment in the middle zone, load-distributing central strap, including mattress bracket for the foot end Maximum load capacity: 130 kg Beam height: 70 mm Construction height: 100 mm Motor: Dual motor, 2 x 4,500 N, standby < 0.4 W, plus lifting motor Available sizes: 80, 90, 100 x 190, 200 cm...

... durability are very important. The rope hoists can be mounted both on the ground and on an arm or beam. Two models of these scaffold hoists feature an extendable arm that can be adjusted from 90 mm to 1200 mm. These hoists must not be used for transporting people, and no persons should remain under suspended loads. Lifting capacity: up to 300 kg...

...Sensitive workpieces are transported through the blasting system using the lifting beam principle. Each workpiece is individually lifted, further processed, and gently placed down. The workpieces are either manually placed or reach the blasting machine on a conveyor belt and are automatically separated. The blasting process starts as soon as a workpiece reaches the entry threshold. It is...

...1-Column Lift LW-Monolift 800 Description Special attachment with stable cross beam Adjustable drive rails with locking mechanism Self-folding ramps with plastic rollers Dead man's switch CE stop Automatic lubrication of the lift nut spindle system Ramp function with roll-off protection...

... transitions from one coil box to the next, end plates made from K-Therm ® AS 550 are also suitable. Applications: - Induction heaters - Induction block heaters - Medium frequency forging block lifting beam heaters - Inductive rod heaters/rod heating - Inductive pipe heaters - Bolt heating systems Other insulation for coils: - Insulation of coil windings - Coil cores, coil bodies - Electrical sheets, electrical coils - Coil carriers, coil frames - Insulation of the heating coil - Coil support...

... – are tested and have been proven over many years. They are individually configured according to the requirements of your process crane. The variety of application possibilities is virtually limitless. HCW hoist trolleys: Lifting solutions in the upper load capacity range MPW hoists: Coordinated modules, compact arrangement of motor, brake, and gearbox MPW hoist trolleys: Modular design, few interfaces, fixture-ready trolley frame Corner-mounted travel units KTL: Tailored single or double beam design with up to four wheels...

... not underneath but between the crane tracks. This means the entire crane has only the height of a single profile. This significantly improves the lifting height, allowing it to overcome tall machines in the transport area.

...All information at a glance: "Long Beams PT 2700 for Drum and Pallet Racks" Beam Length: 2700 mm Load Capacity per Pair: 1800 kg Profile Height: 95 mm Height Adjustable, Grid 50 mm Made from box-shaped profiles, plastic-coated RAL 5010 With welded, 4 mm thick hook plates With safety hooks to prevent accidental lifting Further links to "Long Beams PT 2700 for Drum and Pallet Racks" Questions about the item?

...The Battery Telescopic Magnetic Traverse EPMBL-T with automatic telescopic arm is a fully battery operated magnetic lifting beam. It enables the mains-independent lifting and transporting of different sheet metal formats (up to 12 t) from 4 mm thickness. Flatload - SWL 3:1:4.000 kg Min. thickness:4 mm Lenght min. - max.:2.000 - 8.000 mm Width min. - max.:500 - 3.000 mm Weight:1.200 kg Item No.:74765...

...Finken vacuum lifter VH 10-1000 with telescopic longitudinal beam for the flexible transport of small and particularly large sheets and plates. Load capacity 1000 Kg...

...Vacuum beam, Year of manufacture: 2009 Vacuum beam; Lifting capacity: 2,000 kg; With adjustable pickup positions; Year of manufacture: 2009...

...Block clamps, beam clamps, lifting clamps, and other clamps for lifting and transporting loads. Available in force-locking or form-locking versions - upon request.

...• Load capacity from 500 kg to 10,000 kg • For pulling or moving the load • Bulb-shaped wheels made of machined steel for smooth operation with all beam types • Easy assembly by sliding onto the open beam • Sturdy side plates with safety tabs serving as wheel break support, rail cleaner, and fall protection • Ball-bearing wheels provide a smooth and secure run • Large adjustment range for many...

SMI Handling Systems, as a medium-sized family business, boasts over 35 years of sales experience in vacuum lifters and handling devices. The company is headquartered in Wetter (Ruhr) in North Rhine-Westphalia, where it currently employs 22 staff members. SMI is supported in its nationwide sales efforts in Germany by 5 representatives and by independent partners abroad. SMI specializes in develop...

...Beam traverses with two adjustable swivel hooks for transporting a variety of loads Series TAV Load capacity: 1,000 - 10,000 kg Hook spacing adjustable: 1,000 - 6,000 mm...

...The lifting equipment consists of two mobile boogies. Integrated within the superstructure is a hydraulic power pack which drives the two hydraulic cylinders. The cylinders are situated in the highly robust and laterally adjustable lifting blocks. The lifting blocks and the jack contact surfaces (lifting points) can be repositioned along the cross-beam via a spindle. This allows the flexibility...

...Do you use conventional pallets such as Euro pallets or industrial pallets? Then the NET-RACK pallet rack PR 82 is the ideal storage solution for you! With a large number of components, NET-RACK pallet racks PR 82 meet all the demands of storage technology. The rack frames are made of cold-rolled steel. Each rack frame is secured with at least 2 floor anchors. Beams made of assembled C-profiles with welded hooks at the ends. A safety pin on each side of the beam prevents the unintentional lifting of the beams. The height adjustment grid of the beams is approximately 50 mm.

...The CLAD-LIFT 1000 is designed to handle glass, windows, panels, doors or other elements up to 1000 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece 180 ° vertically and 180 ° horizontally via the hydraulic system. The front driven Clad-Lift 1000 with its polyurethane foam filled wheels is extremly...

We design and manufacture load handling devices of all kinds. We specialize in fulfilling the individual wishes of our customers. This often results in unique pieces that are tailored precisely to the needs of our clients. The number of small series, on the other hand, is rather low. In addition, we are an engineering office for conveyor technology, lifting technology, and special constructions i...

... construction Municipal enterprises Areas of application: Any lifting and moving of heavy loads Maintenance and repair of pumps and centrifuges Installation and removal of electric motors and control devices Loading and unloading of trucks and trailers Use in the workshop or on the company premises.

...TDS suction mixers draw in powders, liquids, or gases below the liquid level while simultaneously homogenizing the contents of the tank. The vacuum needed for suction is generated in the mixing head. The device is mounted on top of the tank using a flange or cross beam. Alternatively, the TDS suction mixer can operate on a lifting frame. The powder is drawn from the container and introduced into...

... technology, conveyor devices, lifting straps, lifting belts, lever hoists, chain hoists, cranes, winches, gear winches, spur gear block hoists, trolleys, rolling trolleys, spool trolleys, beam clamps, chains, steel winches, hand winches, electric rope winches, pallet trucks, electric trolleys, heavy-duty trolleys, hydraulic lifts, lifting magnets, lifting bands, round slings, lashing straps, lashing chains, wire ropes, ropes, lifting chains, sheet metal grippers, tripods, crane scales, eye bolts, and ring nuts.

...lashing straps, products for mechanical load securing, lifting slings, and round slings. - Modulift - Manufacturer of modular spreader beam systems, frame spreader beams, and beams. - Qingdao Qinde Rigging Hardware Co., Ltd. - Manufacturer of shackles, ratchet load binders, GK8 forged parts, and US type tension screws. - Qingdao Yuedasite Rigging Hardware Co., Ltd. - Manufacturer of shackles...

... for protection system solutions Production sites in Germany, Romania, and the People's Republic of China Business Areas: 1. Flexible Protection Systems Bellows for every requirement. Lifting table and laser beam bellows, complete covers with sheet metal components and cabin components, sliding way protectors, roller systems, spirals, telescopic steel covers, custom developments 2. Visibility and...

... steel industry (roller hearth furnaces, continuous annealing, lifting beam furnaces) and act as a factory representative for renowned manufacturers. The products are manufactured from heat-resistant materials using casting, centrifugal casting, precision casting, or as sheet metal constructions, completed by welding, and processed according to customer specifications. There are many application...

WSM-Automation GmbH develops, manufactures, and delivers your highly dynamic screw system, screw automation, screw unit, screw spindle, screwdriver with automatic feeding using a spiral conveyor, lifting beam conveyor, feeding device, feeding hopper, and belt hopper for use in your assembly system in longitudinal transfer as a rotary table in your special machine, manual workstation, etc.

...All leading large system manufacturers have relied on our experience in this area. In the field of low-voltage systems, we have implemented systems up to 9000A. The application areas of these TSK/PTSK certified fields include industrial sectors as well as safety-critical applications such as hospitals, banks, etc. Our product portfolio is complemented by automation technology with our own programming. Tasks such as the conversion of a lifting beam furnace (7500 E/A) or roller tracks in a high-bay warehouse (95 bus participants) have been successfully implemented.

Construction Equipment: Shaft Ring Hoist, Pipe Hoist, Pipe Gripper, Pipe Pulling Device, Tripod. Lifting Devices: Winch, Gripper, Clamp, Beam, Rotating Beam. Cranes: Portal Cranes, Aluminum Cranes. Special Equipment: Motor Roller, Hand Roller, Custom Construction. Vacuum Technology: Vacuum Lifter...