insert fittings

...(Socked-Weld-Fittings) Straight from our warehouse We always have numerous versions of weld-in fittings (ANSI B 16.11) available in our extensive warehouse in Kamen. We can also supply you at short notice. We only deliver goods of European origin. 3 types of reducing inserts Insert reducers are available in three different types (see technical data sheet in the download area...

... sections Material: Multi-glued birch plywood frame Celena Cherry laminated, solid beech crossbeam Celena Cherry laminated Slat width: 36 mm Slat thickness (standard): 12 mm Features: 6-fold hardness adjustment in the middle zone, 2 load-distributing center straps, reinforced grid fittings Maximum load capacity: 200 kg Beam height: 50 mm Construction height: 80 mm Available sizes: 80, 90, 100 x 190, 200 cm Extended lengths: 210, 220 cm Extended widths: 120, 140 cm Custom sizes: Upon request...

...Designed to install virtually any type of thermal/ultrasonic insert. Up to 75% of an insert's performance is a direct result of how well it was installed. Therefore, to maximize performance, all factors affecting the installation must be carefully controlled. The SPIROL model HM manual insertion controller has been designed to eliminate the operator's dependence on controlling these factors. The...

Marinetech is today one of the largest providers in Europe for stainless steel boat and yacht accessories and stainless steel fasteners. Currently, the company employs 80 staff members. Over 10,000 different items are constantly held on 3,000 pallet spaces and 40,000 container spaces. Additionally, there are 25,000 fastening items from the external logistics center. Join us in the future. Our prod...

...We manufacture a wide range of products for you Metal seals in all steel grades according to DIN and ASTM Seal lenses DIN 2696, according to BASF factory standards Insert rings DIN 2512, EN 1092-1 Annex H Grooved seals DIN 2697 Snap rings and lens snap rings Throttle discs or clamping rings Adapter rings (seal strip smooth against groove/spring) Flanges in special designs Turned parts for mechanical engineering according to drawing...

... traditional 90° conformation to the main pipeline. Depending on the different configurations, they are divided into LATROMEGALET that can be installed to obtain a branch outlet with an angle other than 90°. ELBOWMEGALET that can be mounted on a curve. INSERT MEGALET that can be welded directly inside the main pipe. All these types can be supplied with butt weld (BW), socketweld, threaded and also flanged ends.

We are specialists in hall construction, such as storage halls, lightweight halls, and system halls. For over 20 years, Hacobau GmbH has been producing, distributing, and assembling steel halls, lightweight halls, tire storage halls, quick-build containers, shelving systems, office containers, sanitary containers, and sales pavilions. From pragmatic storage halls to workshop halls and direct accep...

... scanners • Incl. tabs with blank insert sheets for labelling the display panels • Practical pivot mechanism for simple replacement of the displays • 5-year warranty • Easy to extend via push-in fittings with product # 5624 or 5811 Colour:assorted colours Material:plastics Reference:563200...

The company BIVAL spa specializes in the production of fittings and various parts made to order and operates in a facility of about 3000 square meters. Currently, it has one of the largest production capacities in the sector (over 200,000 balls daily). The machine park consists of 23 multi-spindle machines (bar passage diameter 48), 2 single-spindle machines, 3 transfer machines, and 22 grinding m...

...The styling of the VARIO bathroom insert allows it to offer a wide range of options for the practical storage and easy access of jewellery, cosmetics or other accessories. Thanks to additional wooden dividers the compartments can be varied in the width to meet individual requirements. A key feature is the round styling that prevents objects from slipping and sliding about. The VARIO bathroom insert is supplied as a precisely fitting accessory for the full range of drawer systems including all the radii and recesses necessary to accommodate the fittings.

... all types of turned parts in carbon and stainless steel, turned parts for copper and brass, aluminum turned parts, and machined components. Such as pipe fittings, hose fittings, shafts, pipe coupling parts, hose couplings & transition couplings, copper machined pipes, flanges, bushings, sleeves, knight heads, pedestals, piston rods, insert long pins, plug pins, drive pins and rods, ball head...

... • Fittings in aluminum • Fittings as metal/wood construction • Height leveling • Skirts • Tear-out protection • Insert plates • various... Width / Length: 40 - 80 cm / 120 - 180 cm Height: 73 cm Thickness: 20 mm (70 mm high frame)...

... the substrate with mounting brackets. All types of directional changes of the ducts, branches, and ends are made using appropriately selected fittings such as bends, T-pieces, crosses, and reducers for round ducts or fireplace and ventilation grilles. The entire system is complemented by dampers and air inlets. Material of manufacture: galvanized sheet metal Cross-section: 150x50mm Corner: 90° Weight (kg): 0.5000 Article number: 9005249037191...

...Smart Cable Management for Customized Installation Paths With the industrial channel, PFLITSCH has set an industry standard: With 13 different cross-sections ranging from 50 mm x 50 mm to 600 mm x 150 mm, along with approximately 80 fittings and cover variants, the system offers the right solution for every application. The channel can be opened along its entire length to easily insert and...

...Assembly brackets are most often used in pairs or in conjunction with a hinged bracket. Reference: 10265 Assembly bracket: high-pressure injected zinc Assembly bracket: painted aluminum color Handle: plastic coating Insert: natural stainless steel...

...DKR Category Hydraulic hoses and fittings / Hydraulic hose fittings / Screw fittings AF / DKR / Steel Product number supplier 421931 Bezeichnung:DKR 1/4" DN:6,3 Gewinde:G 1/4"-19 RA:- Zollnr:73079910 Weight:27 g Content:1 STK Barcode:421931 Price Unit:1 Packaging Unit:1 quantity min:1 VAT key:19.00 %...

...Steel pin, threaded bolt, for door insert 2 holes drilled and threaded, Thread grade: 5/16-18 UNC Size: Internal hex diameter 0.750 +/-0.010 inches Length 4.438 +/-0.010 inches, Wrench size of hex end 0.75 inches, Diameter of round end 0.625 +0.000/-0.005 inches Piece weight: 223 g...

...Valve Insert 315107...

...DN 15 - DN 150, PN 3 - PN 6 - Type 800.801 Usage: Acids, alkalis, corrosive liquids, water, wastewater, sludges, solid-containing, crystallizing, and pasty media, etc. Design: open construction, free passage, without packing gland, with replaceable hose insert, with forced actuation, with built-in spring, with adjustment screw. Materials: see table Operating pressure: DN 15 – 80 max. 6 bar DN 100 max. 5 bar DN 125 – 150 max. 3 bar Flange connection: DIN 2501, PN 16, DIN 2533 / EN 1092 – 2, PN 16...

...Internal gear insert...

...NiroSan® Insert Piece with Insert End and External Thread, Stainless Steel Fittings - Piping system made of high-quality NiroSan® press fittings (stainless steel fittings) with a molded part seal made of EPDM (Ethylene-Propylene-Diene Rubber) and NiroSan® stainless steel pipes according to DVGW worksheet GW 541 and DIN EN 10312. All NiroSan® stainless steel fittings are manufactured from...

...CNC wire winding for electrofusion fittings insert wire winding ...

...Plug-in quick coupling: Insert the corrugated pipe – Done. You can obtain the corrugated pipe coupling in all common thread types made from Polyamide 6. For special applications, the GERIQUICK® is also available with metal threads and in an EMC version. Storage instructions Catalog: https://drive.google.com/file/d/15C_3JiwkitksU-uGKsSuAtVY0OY49Fur/view?usp=sharing...

...Our 3E insert fitting can be directly screwed onto existing fittings with external threads according to DIN 8063 and is immediately ready for connection - both to flexible hoses and to pipes. The insert part of the 3E fitting is manufactured with the integrated one-piece fitting. This not only saves time and effort but also ensures the necessary tightness and thus safety. Nut: loose...

...Pvc Hose Without Insert Make / type:Alfagomma 490OO Construction:Transparent PVC Application:General purpose. Sterilize with 5% soda solution Temperature range:-5 °C +60 °C (+23 °F +140 °F) Diameter:3mm to 25mm...

...Hydraulic hose with 1 steel reinforcement 1-SN - Hose according to DIN 20022 Part 3 (SAE-100 R AT). Hydraulic hose with a steel braid, inner tube and cover made of synthetic rubber available by the meter crimped with all common fittings (seal cone with and without O-ring, external thread, pipe fittings, bends) Temperature range: -40°C to +100°C...

Cores for die casting......and other casting processes Combicore core with metal shell Cross-section through a component with Combicore core Combicore cores consist of a shaped metal shell filled with a special material. This allows foundries to create media-conducting channels and other cavities in cast parts efficiently, quickly, reliably, and cost-effectively. Combicore cores are extremely stab...

...EUROFIX Insert Fittings Standard cable gland mounted with a dowel for installation without a counter nut For information regarding cable glands, see MZKV... Delivery time: approx. 3 working days...

... set includes fittings equipped with a watertight seal to prevent water and air leaks during use. ⊕All fittings come with a standard connector, allowing them to be attached to a wide range of hoses and equipment. ⊕A threaded screw makes it easy to attach the fittings to the equipment and maintain a constant pressure. ⊕The overlapping grooved segments at the end of the fitting ensure good conductivity of pressure and fluids through the hose. About the HBM 8 mm 1/4" hose fitting Reference: 0477...

...NEMS electrical insulation insert is a one-piece pipe product serves to protect the pipeline from electrochemical corrosion in areas affected by stray currents. Installed -at the boundaries of sections of electrochemical protection of pipelines -on the borders of property plots -at the boundaries of pipeline sections with different types and quality of protective coatings or a significant...