glass coatings

Süd-Optik Schirmer GmbH has been an internationally leading manufacturer of series production of optical components made of glass for over 80 years. Innovative production methods and our quality management system according to DIN EN ISO 9001:2015 ensure a continuous excellent quality of our optical lenses and technical glasses. From planning to the finished product, all work steps are carried out...

... Filters are often stacked between sapphire windows within the IPL applicator to offer a more defined wavelength spectrum when in use. Dichroic filters consist of thin film dielectric coatings on glass, and are designed to offer high transmission over a specific wavelength while reflecting all other wavelengths, having negligible absorption. The dielectric coating is perfect for high power...

...Diameter: 7-200 mm ROC: 10mm - plano Size tolereance up to +/- 0,01 mm Center thickness tolerance: up to +/- 0,02 mm Surface quality: up to S/D 10-5 Irregularity: (Plano surface): L/10 Form Error Z (Aspherical surface): +/- 0,2 um Centration: up to 30“ Coatings: Coatings according to customers requirement Materials: All optical glass from SCHOTT, OHARA, CDGM and SUMITA Crystals Quarts other material on request...

...With the spacer-free insulating glass OKATHERM, a wide range of design and functional concepts can be realized. A broad selection of different types of glass, coatings, and constructions provide protective and utility functions for facades and roofs, addressing the specific functional requirements of architects and planners. Additionally, by combining OKATHERM insulating glasses with other OKALUX solutions, a uniform facade appearance can be ensured.

...2-component HYDRO Acrylic PUR paint for universal back glass coating. - Colored topcoat for glass coatings with very good resistance to chemical and mechanical stresses. It is lightfast, durable, scratch-resistant, and features an even pigment distribution. The material dries to a uniform paint film at room temperature, providing excellent adhesion to the glass substrate.

...IGU is a glass unit made from two or more glass panes with dry air or gases inside. Thermal and solar control IGUs are made from high-quality Low-E glass with solar control. By providing maximum thermal insulation and solar control, they reduce your heating costs in winter and your air conditioning costs in summer.

...GLASS REFLECT is a non-combustible energy-saving fabric specifically designed for the climatic separation of building sections. With its high-performance low-e coatings, it reflects almost all thermal radiation, making it ideal for maintaining room coolness and keeping heat at bay. The fabric is less than 0.5 mm thick and offers significant advantages for installation, including excellent rolling...

...Metallic reflection coatings enhance reflection and are used in many optical instruments for light deflection. We coat glass, metal and plastic. The choice of coating material depends on the reflection requirements in the defined wavelength range. We use aluminium, gold, silver and chromenickel, either with or without protection coating for the VIS, UV and IR ranges. ...

...E-glass fabrics with additional cut-resistant treatment have increased cut and abrasion resistance and can be used in applications with higher mechanical loads. The coatings protect the material from fraying and reduce the formation of fiber dust. Application temperature: up to 550°C Application limit temperature: approx. 600°C Designs: made from smooth yarns Coating: 2-sided cut-resistant treatment in various colors Material thickness: 0.2 - 1.0 mm Standard width: 1000 mm Format: roll goods, blankets, cut pieces, stamped parts, custom configurations...

...The technology of staining by Coaching is carried out by electrostatic spraying on high-tech equipment from Glasscoat (UK). Both full and partial staining of glass containers allows you to create an imitation of colored glass. Due to the control of the coating thickness, a dense, uniform and uniform coloring is obtained at the output. Our coatings have outstanding durability, ensuring that the...

... undercoat for plasterboard. Smoothing compound.","ADMISSIBLE SUPPORTS":"All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with tapered edges and cardboard faces.","TECHNICAL CHARACTERISTICS":"• Adhesion of the tape: > 1000 g\n• Cracking: no cracks up to 5 mm thickness\n• Density: 1.2 (1.7 for traditional coating)","PREPARATION OF SUPPORTS":"The plasterboards should be fixed in accordance with DTU 25.41 and DTU 25.42. The cut edges of the boards must be beveled and dusted."}...

...The characteristic feature of structurel silicon facade systems istj^Mie it is, the absence of the appearance of aL^llmjm profiles. For the desired appearance of a completely glass surface, structuraJ^â+lî^ënTacade is applied.

... highstrength, heatresistant or fireproof, or free of asbestos and fibres. We can also customise desired processing properties such as viscosity and longterm storage. If required, we produce the water glass based sealant separationfree, so that no sedimentation occurs during a container's storage.

... its bright whiteness, it is used in products such as paints, coatings, papers, inks, toothpaste, cosmetics, glass, ceramics and food coloring Properties: CAS number,13463-67-7 Melting / freezing point Anataz: 1560°C, Rutyl: 1843°C, Brukit: 1825°C Boiling point range 3000°C Relative density Anataz: 3,9 kg/l (20°C), Brukit: 4,17 kg/l (20°C), Rutyl: 4,26 kg/l (20°C) Solubility in water 1μg/l Chemical formula TiO2 Appearance White solid Odor Odorless Molar mass 79.866 g/mol Density: 4.23 g/cm3 (rutile) 3.78 g/cm3 (anatase)...

...Glass is not as smooth and even on the surface as it seems. Even new glass resembles - on a microscopic level - a crater landscape. Dirt and limescale adhere to the glass surface. Many substances also react chemically with glass and cannot be removed with conventional cleaning agents. To solve this problem, a special coating technology has been developed. By treating glass with BriteGuard, the glass surface receives a kind of Teflon layer. Dirt adheres less and is easier to remove. Especially suitable for showers, roof glazing, glass furniture, mirrors, and sandblasted glass.

...The blasting of aluminum is used to create decorative and visually appealing aluminum surfaces. This variant of mechanical surface treatment produces a matte finish. Blasting can also deburr aluminum parts. Depending on the aluminum alloy and application area, different blasting media (e.g., glass, glass fragments, quartz sand, corundum, also known as aluminum oxide) with varying grain sizes and hardness are used.

...Powder Coating Application of thermosetting coatings in the form of powder coatings, with an oven capacity of up to 3900x1180x1800mm, temperature up to 240°C...

... • Improve profitability and product quality • Reduce set-up time • Detect defects quickly • Automate quality monitoring for ISO9000 • Reduce scrap • Efficiently manage the heat balance in the oven • Automatically adjust the emissivity value when changing glass types or coatings Measured temperature range:100 to 950°C (212 to 1742°F) System accuracy:±0.5°C or ±3°C (6°F) Repeatability:±1°C (2...

...CSI can work in UV facilities with arc or LED technologies. The choice will be made based on production conditions and, of course, the product itself. UV coatings offer greater resistance to abrasion and scratches. Therefore, they are an interesting solution for protecting the delicate surface of glass or plastic, but also for enhancing the assembly process of printed circuit boards.

...Lightweight pre-mixed adhesive and leveling compound with glass spheres based on consistently high-quality hydraulic binders, produced using a computerized system. It is suitable for bonding and leveling insulating panels made of polystyrene, polyurethane, cork, and cement-bonded wood, both indoors and outdoors; for leveling surfaces made of concrete, rustic coatings, plastic and/or mineral...

...Coating Processes Wet Painting Electrostatic Powder Coating Spin Sintering Flame Spraying Post-Treatment Oven Sintering Turning/Grinding/Lapping/Honing Glass Bead Blasting, Electropolishing Assembly of Components Quality Assurance Measuring Coating Thickness Testing for Porosity...

...Silicone Coating is a specialized service offered by Vielta s.a, providing customized solutions for various applications, including medical use, stocking form, and sport applications. This stage of production involves the application of silicone coatings to enhance the functionality and durability of textile products. By utilizing advanced techniques and machinery, Vielta s.a ensures that each...

... holes and cracks can be done by applying Syntech AS 21 epoxy mortar. Resin coatings The surfaces to be covered must be stable, clean and free of substances such as dirt, grease, oil, etc. which can affect the adhesion of the coating. Smooth the surface by mechanical sanding with diamond discs and vacuum. It is recommended to wash the surfaces and let them dry completely before applying the finish...

... processed on bending lines. They can even be installed in IG units subjected to extreme external loads. The metallic and non-metallic coatings on the back of the warm edge spacers ensure a perfect seal against water vapor and argon permeation. The surfaces in contact with sealing products have very good adhesion to sealing materials.

... microporous thermal insulation material with an extremely low thermal conductivity, meaning it has very good insulating capacity. SILCAPOR Ultra 950 and SILCAPOR High 1050 are rigid boards and can be supplied with various coatings (PE film, aluminum foil, glass fleece) to protect the microporous structure. In addition to dust-free handling, there is, depending on the variant, additional protection against moisture. SILCAPOR-FP 1050 is a thin, flexible board. The double-sided coating with a biodegradable felt (thickness approx. 0.5 mm) and the standard...

...Coatings for metal surfaces, plastic surfaces, glass, textiles with many different properties such as antiviral, antimicrobial, gold, corrosion protection, colors, etc.

...Advanced production technology allows us to fulfill special market demands for flexible reinforcements, according to application or customer needs. Specially developed AR flexible grids in combination with a variety of different coatings and filers provide high tensile strength, improved bonding to the matrix, increased alkaliresistance, and strong crack resistance. Flexibility without...

Manufacturer and supplier, norelem is the global leader in standard components for construction and mechanical engineering. The general range consists of 100,000 product references, covering all the needs of companies for standard mechanical elements as well as systems and components for machine and installation construction. All our parts are available in CAD data, which can be downloaded directl...

... galvanizing (galvanizing of metals); - powder coating. As a production company, we offer: - sandblasting of raw steel metals; - removal of paint coatings through sandblasting and soda blasting (without heating or damaging the surface); - glass blasting for stainless steel and aluminum; - surface unification after machining and welding; - painting of large surfaces with an airless hydrodynamic unit.

...climatology, manufacturing, transportation, coal technology, veterinary science, coatings, marine engineering, wave physics, trade, mechanics, wind energy, mass media, metallurgy, zoology, computer science, meteorology, metrology, construction, military technology, crystallography, mineralogy, design, technology, ecology, engines, economics, electricity, nautical engineering, electrical engineering, nuclear physics, electromagnetism, nuclear science, electronics, oceanography, electronic engineering, oil, electric power, optics, environmental engineering, organic chemistry.