glass coatings Germany

Süd-Optik Schirmer GmbH has been an internationally leading manufacturer of series production of optical components made of glass for over 80 years. Innovative production methods and our quality management system according to DIN EN ISO 9001:2015 ensure a continuous excellent quality of our optical lenses and technical glasses. From planning to the finished product, all work steps are carried out...

...Diameter: 7-200 mm ROC: 10mm - plano Size tolereance up to +/- 0,01 mm Center thickness tolerance: up to +/- 0,02 mm Surface quality: up to S/D 10-5 Irregularity: (Plano surface): L/10 Form Error Z (Aspherical surface): +/- 0,2 um Centration: up to 30“ Coatings: Coatings according to customers requirement Materials: All optical glass from SCHOTT, OHARA, CDGM and SUMITA Crystals Quarts other material on request...

...With the spacer-free insulating glass OKATHERM, a wide range of design and functional concepts can be realized. A broad selection of different types of glass, coatings, and constructions provide protective and utility functions for facades and roofs, addressing the specific functional requirements of architects and planners. Additionally, by combining OKATHERM insulating glasses with other OKALUX solutions, a uniform facade appearance can be ensured.

...2-component HYDRO Acrylic PUR paint for universal back glass coating. - Colored topcoat for glass coatings with very good resistance to chemical and mechanical stresses. It is lightfast, durable, scratch-resistant, and features an even pigment distribution. The material dries to a uniform paint film at room temperature, providing excellent adhesion to the glass substrate.

...GLASS REFLECT is a non-combustible energy-saving fabric specifically designed for the climatic separation of building sections. With its high-performance low-e coatings, it reflects almost all thermal radiation, making it ideal for maintaining room coolness and keeping heat at bay. The fabric is less than 0.5 mm thick and offers significant advantages for installation, including excellent rolling...

...Metallic reflection coatings enhance reflection and are used in many optical instruments for light deflection. We coat glass, metal and plastic. The choice of coating material depends on the reflection requirements in the defined wavelength range. We use aluminium, gold, silver and chromenickel, either with or without protection coating for the VIS, UV and IR ranges. ...

...E-glass fabrics with additional cut-resistant treatment have increased cut and abrasion resistance and can be used in applications with higher mechanical loads. The coatings protect the material from fraying and reduce the formation of fiber dust. Application temperature: up to 550°C Application limit temperature: approx. 600°C Designs: made from smooth yarns Coating: 2-sided cut-resistant treatment in various colors Material thickness: 0.2 - 1.0 mm Standard width: 1000 mm Format: roll goods, blankets, cut pieces, stamped parts, custom configurations...

... highstrength, heatresistant or fireproof, or free of asbestos and fibres. We can also customise desired processing properties such as viscosity and longterm storage. If required, we produce the water glass based sealant separationfree, so that no sedimentation occurs during a container's storage.

...Glass is not as smooth and even on the surface as it seems. Even new glass resembles - on a microscopic level - a crater landscape. Dirt and limescale adhere to the glass surface. Many substances also react chemically with glass and cannot be removed with conventional cleaning agents. To solve this problem, a special coating technology has been developed. By treating glass with BriteGuard, the glass surface receives a kind of Teflon layer. Dirt adheres less and is easier to remove. Especially suitable for showers, roof glazing, glass furniture, mirrors, and sandblasted glass.

...The blasting of aluminum is used to create decorative and visually appealing aluminum surfaces. This variant of mechanical surface treatment produces a matte finish. Blasting can also deburr aluminum parts. Depending on the aluminum alloy and application area, different blasting media (e.g., glass, glass fragments, quartz sand, corundum, also known as aluminum oxide) with varying grain sizes and hardness are used.

... • Improve profitability and product quality • Reduce set-up time • Detect defects quickly • Automate quality monitoring for ISO9000 • Reduce scrap • Efficiently manage the heat balance in the oven • Automatically adjust the emissivity value when changing glass types or coatings Measured temperature range:100 to 950°C (212 to 1742°F) System accuracy:±0.5°C or ±3°C (6°F) Repeatability:±1°C (2...

... microporous thermal insulation material with an extremely low thermal conductivity, meaning it has very good insulating capacity. SILCAPOR Ultra 950 and SILCAPOR High 1050 are rigid boards and can be supplied with various coatings (PE film, aluminum foil, glass fleece) to protect the microporous structure. In addition to dust-free handling, there is, depending on the variant, additional protection against moisture. SILCAPOR-FP 1050 is a thin, flexible board. The double-sided coating with a biodegradable felt (thickness approx. 0.5 mm) and the standard...

...Coatings for metal surfaces, plastic surfaces, glass, textiles with many different properties such as antiviral, antimicrobial, gold, corrosion protection, colors, etc.

...On the surface: spotless. Upon closer inspection: clean industrial coatings of the demanding kind. Painting L 10000 x W 2500 x H 2500 1K paint, 2K paint, max. weight 400 kg Cleaning, automatic L 1545 x W 1545 x H 1000 Glass bead blasting L 6000 x W 2500 x H 2500, grain size 70 - 110 µm...

...Coatings in RAL colors are also possible on request! The equipment is variable. Equipment:Schuko, CEE16 Design:cylindrical Ground:Asphalt, Concrete, Stone Protection:IP44 Material:Stainless steel Color:Stainless steel Surface:glass bead blasted...

... flexibility Compensators are used in smoke extraction ducts or permanently in flue gas lines in the aluminum industry. They are a crucial component when it comes to compensating for the thermal expansion of metal pipes. Therefore, soft material compensators must be made from flexible fabrics that allow for the compression of the compensator components. Coatings for soft material compensators Coatings can be applied on one side or both sides. These are applied multiple times to achieve air tightness. With each coating step...

... with drilled holes or rounded corners. You can also order test specimens made of any common materials such as wood, glass, aluminum, steel or plastic for the TABER abraser test. From various metals From various plastics With boreholes Bare or pretreated Degreased and vacuum-packed Various sizes upon request Coil-coated aluminum or sheet steel upon request ...

... signals. Suitable optics are used for the laser source used, either directly water-cooled metal mirrors with coatings of least absorption, or alternatively glass optics. The use of an adaptive optics optionally allows the freely programmable focus position for cutting and piercing. The exclusive use of torque motors reduces mechanically moving components and thus guarantees consistently high machining accuracy and best machining results over a long service life, against mechanical damage reliably protects our proven 3D collision protection.

... material and can be welded into endless belts for transport drives. Properties • Areas of application: Linear drives, transport technology • Color: anthracite • Material: polyurethane • Bulk material and endlessly welded belts • Coatings: Type T, T-groove (TR-1), PU-yellow, Supergrip, PA on the tooth side • Usable in wet areas in the appropriate design • Profile: AT10 BAS • Bulk material on rolls of...

...1-K assembly adhesive based on MS polymer. Properties: Specific weight 1.54 g/ml, compatible with coatings, odor-neutral, isocyanate-free, MS polymer reacts with moisture in the air, permissible total deformation +/- 25%, hardening at 23° C 2 mm/day, skin formation time approx. 10 min., quick initial adhesion, wide adhesion spectrum. Temperature resistance: -40° to +90° C. Processing temperature...

...Surface finishing such as matting, satinizing, smoothing, and structuring of components. - Shot peening with glass beads, for example, increases the lifespan of die-casting molds, tools, etc. By carefully selecting the shot size and types of media, it is possible to create suitable surface structures for different requirements: - Rough surfaces for bonding, coatings, and friction - Matted, glare-free, and smooth surfaces - Clean surfaces through cleaning, descaling, stripping, and derusting...

...We paint your mass-produced small parts made of metal, plastic, wood, or glass.

...Processing: Surface Treatment Stainless Steel Blasting Booths – Glass Bead Blasting 1300 x 800 x 800 mm Blasting Containers: cleaning, derusting Grinding Area: plastering, deburring, grinding, polishing Vibratory Finishing Machine: deburring Brush Deburring Machine With rotary brush system for deburring, rounding, and finishing of sheets Uniform, targeted edge rounding Surfaces provided with a non-directional grinding pattern...

...We prefer to shine through performance. You can see that in the surfaces we treat. However, professional surface technology is more than just the right paint. All parts to be coated must first be properly prepared. Our employees use blasting media of varying intensity and effect, such as corundum or glass beads. They clean, sweep, treat non-ferrous metals, and apply a thick iron phosphate coating if necessary.

...Often, there are specific requirements for the component surface. The manufacturing processes in sheet metal processing often include surface treatment carried out according to customer specifications. In addition to powder coating and painting, we offer our customers nearly all coating options. Many finishing processes, such as glass bead blasting, grinding, and etching, can be performed in...

...Bluing of brass, copper, bronze, and steel as design surfaces according to customer specifications. Vibratory grinding, angel hair, brushing, grinding, or glass bead blasting as a base and combination with designs. Blued panels, laser cuts, and edge elements made of BRASS, BRONZE, COPPER, or STEEL. We manufacture the surface according to your ideas.

...We offer you a wide range of surface treatments, including all paints and colors according to your wishes and specifications. Painting is done either via our paint line or in separate spray booths with water or dry wall extraction. Our range includes: -Water-based paints -Matte paints -DD paints -High-gloss paints, sanded and polished -Oiled surfaces -Stained surfaces -Patina -Glass surface coating...

... foil your products for you, or apply glass and ceramic blasting to create uniform surfaces. The following options are available to you: • grinding grain 240 • grinding grain 320 • grinding grain 400 • grinding grain 600 • grinding grain 800 • double grinding • industrial polishing • high-gloss polishing • mirror polishing • brushing • glass bead blasting • ceramic blasting • foiling...

...Different matrix systems depending on the requirements (e.g., polyester, epoxy, silicone resins) Different fiber materials (e.g., glass, aramid, basalt, carbon fibers) and semi-finished products (fabrics, mats, nonwovens, unidirectional and multiaxial fabrics)...

...Smart nets for protecting and packaging high-quality metal parts or glass.