flow separator

We were founded in 1976 in Milan. Since then, the company has always remained family-owned, supported by skilled collaborators; this allows us to maintain a lean and efficient structure both in daily management and long-term planning. Pressure gauges for measuring air, water, oil, gas, oxygen, acetylene. Dry or glycerin-filled for use in hydraulics, pneumatics, pharmaceuticals, food industry. Bour...

...Features: - Adjustable flow rate of 10 - 160 l/min depending on equipment and application - Separation of particles from 2-2000µm based on the area of use - Fast transport from machine to machine - Can be transported with a forklift - Easy to handle - Base frame designed as a leak tray - Portable separator system fully available in stainless steel!

...Chain Magnetic Separator are used for the cleaning of liquids contaminated with magnetizable solid particles and foreign oils. F.E.S. separator systems can be used in full-flow or bypass cleaning applications. The separation performance varies depending on the level of contamination and the volume flow rate. Note: The separator systems can be supplied via a separate supply pump, existing system...

...QAL1-certified ultrasonic volumetric flow measurement for calculating mass emissions based on dust and gas measurements. Measurable parameters: Volumetric flow Technology: FlueSonic sound measurement Measurement range: 0 – 50 m/s Inner diameter of exhaust channel: up to 10 m Flue gas temperature: up to 200 °C Fabric filter: Yes Cartridge filter: Yes Coalescing separator: Yes Cyclones: Yes Electrostatic precipitator (ESP): Yes Wet electrostatic precipitator (WESP): Yes Wet scrubber: Yes...

...Mikropor "Conwrap" separators are standard separators in a wrapped form. These separators are designed for a flow from the outside to the inside and can be used with all oil-injected, rotary screw, and reciprocating compressors. The Conwrap separators operate with a flow rate of 1 to 60 m³/min at 7 bar and 1 to 3 mg/m³ of conveyed oil.

... container (hopper, bottom), and the dip tube (mounted centrally from above in the inlet cylinder). In the inlet cylinder, the gas/particle mixture or liquid/particle mixture is directed onto a circular path by tangential injection. Due to the narrowing of the subsequent cone, the rotational speed increases to such an extent that the particles are flung against the cone walls by centrifugal force and slowed down enough to detach from the flow and cascade down into the collection container. For sufficiently heavy particles, the cone is not necessarily required. The...

... practically eliminates the possibility of contact between dust and water. After wetting, the emission flows into the cyclone separator. Here, a highly effective separation of emissions takes place through air stabilization and agglomeration. The dust-laden particles fall down and predominantly collect on the water surface of the sludge/paper conveyor. The air, on the other hand, is directed to the fan after reducing the flow velocity in the cyclone, through a droplet separator and...

...Using negative air pressure, the Dry Destoner makes the wheat flow on an air cloud. The heavier foreign materials (stones, glass etc.) stay on the vibrating sieve. The sieve acts as an escalator and carries the product to the discharge spout. The machine is driven by two vibration motors. The vibrating body is isolated from the chassis using rubber vibration dampeners and the vibration is isolated. The inclination and air suction level are adjusted for proper cleaning.

...Continuously remove solids from your liquids. This machine can process flow rates of up to 100,000 litres per hour at mesh sizes down to 20 microns.

...Flottweg separators remain stable even under acceleration forces exceeding 12,000 g: Their compact, robust design ensures smooth operation and simplifies maintenance. The disc stack and distributor create optimal flow conditions in the drum. This enables highly efficient solid-liquid separation and maximum separation sharpness when separating liquid phases. The number of wear parts and seals is minimized, reducing downtime and operating costs. Additionally, Flottweg's expertise as a system partner is crucial, as the separator is often the final processing stage in a larger separation process.

...Filter + filter water separator Sizes: 1/8" and 1/4" Filter fineness: 5 µm + 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 370 Nl / min Pressure range up to 15 bar...

... feeding table located at the product entrance ensures homogeneous goods flow throughout the channel. The rear curtain, which is moved throughout, allows the duct cross-section to be adjusted as desired by means of adjustment bolts. This precise adjustment of the air speed in the duct ensures that the light substances in the grain passing through the duct are separated in the desired amount.

... device. Advantage: improved flow-optimized filter technology, quicker setup, decreased material and space requirements – no separate additional micro filter housings required. With respect to insulation drying of surfaces sized up to 40 m², no other model is quite fit to hold a candle to this separator, for despite its ultra-compact dimensions the WA 4i comes fully equipped with numerous practice-oriented detailed solutions, such as a construction yet easier to maintain, TTKwic quick couplings, cable holder, residual water drainage and much more. Technology:magnetic Separated substance:water...

...Advantages Certified Gas Separator; maintenance-free operation Area of application For the use at refuelling points of aviation fuel, gasoline and hydrocarbon Flow rate Various filter sizes and the modular design enable any required flow rate. classification number P54 Filter aid - Filtration degree - Medium Kerosene, fuel, hydrocarbon Filter material -...

... to solid particles and fiber content. Primarily used after gas scrubbers, evaporators, process plants, pipelines, as well as on the outlet side of chimneys to prevent the re-evaporation of condensate droplets. The adaptation of the swirl separator to various operating conditions and the process engineering design ensure excellent properties with a correspondingly small diameter, high flow velocity, low pressure loss, and optimal separation.

...-PULSE versions (depending on the type of separator) Maximum flow rate: 200,000 l/h Series: GF, GFC, VA, Y, SE, COMPACT, Classic Other metal particle detection systems: Flat detectors for installation under or above conveyor belts Detection tunnels on conveyors Annular detectors Separators Pulsotronic manufactures: Inductive and capacitive sensors Devices and lines for the detection and separation of metals Image processing systems Magnetoresistive sensors Sensors...

...Protect your scrap removal and processing system from metal solids. The tramp metal separator is primarily used with a PRAB Chip Processing system for removing bar-ends, broken tooling and other solids from the chip flow. This protects the scrap metal equipment from damage- reducing downtime and costly repairs. PRAB offers a complete line of tramp metal separators and scrap removal systems to remove bar-ends, broken tooling and other solids from chip flow protecting scrap metal equipment from damage. This reduces downtime and saves money on costly repairs.

...The oil and water flow is introduced into the tank and evenly distributed across the entire cross-section. They consist solely of the parallel channel plate pack made of rigid, UV-stabilized polystyrene, which is enclosed in a split pot frame AISI 304; they are typically used for installation in concrete tanks specifically designed to accommodate plate packs. Features Available height: 0.85 m Available widths: from 0.60 m to 2.20 m Available lengths: from 1.00 m to 3.00 m High solid-liquid separation efficiency -Easy installation and operation -Compact design -Low acquisition and operating costs...

...MEASUREMENT CHAIN OF THE PORTABLE REFERENCE WITH DKD/DAKKS CALIBRATION CERTIFICATE FOR COMPRESSION LOADS FROM 20 N TO 100 KN Minimum/maximum memory of the certificate for the full measurement chain, DKD/DAkkS calibration sensor can easily be integrated into the force flow. FEATURES Highest accuracy 12 selectable force measurement ranges from 20 N to 100 kN DAkkS calibration certificate for the full measurement chain Minimum/maximum values TEDS separator, automatic reading of sensor data The sensor can easily be integrated into the force flow. Type: Compression...

...Vacuum vessels optionally made of aluminum or stainless steel, vacuum pumps in corrosion-resistant gas-tight design including oil mist separator with oil return, up to 4 mass flow controllers for gas supply. Customized gas inlet for optimal distribution. Pressure measurement as required with capacitive measuring tube or resistance manometer (Pirani). Coupling of RF power using impedance matching...

... washing, robot-guided high-pressure washing and deburring with a maximum of 450 bar. Bath Maintenance: Coarse dirt basket filter, full-flow filtration, gravity oil separator Heating: Electric or technical heat Installation Area: L x W x H = 3,000 x 2,000 x 3,000 mm...

...Pre-filter for coarse dust, shavings, lint, scraps, etc. for installation before the main filtration system A cyclone pre-separator can be installed as a type of pre-filter for coarse dust, shavings, lint, scraps, etc. before the main filtration system. The inner wall of the cyclone pre-separator tapers slightly towards the bottom, allowing the extracted air to flow through like a whirlwind...

...A Tangential Separator allows for the cost-effective and efficient separation of sedimentable particles/flocs from a suspension. The Tangential Separator (TS) is a container that effectively and economically retains sedimentable contaminants from a suspension. It consists of chambers of varying sizes within a cylindrical container. This design generates different flow velocities that positively...

... to integrate the magnetic separators directly into the machines. In decentralized media preparation, magnetic separators are often placed on a paper band filter, collection container, or tank, where they operate in full or bypass flow. Whether as a small system with a few liters per minute or as a central system with several thousand liters per minute, we have the right magnetic separator for you.

...For the automatic separation of ferromagnetic particles from liquids with flow rates of 60 - 1560 l/min. Larger flow rates available upon request. The contaminated liquid is distributed via an inlet dampening and directed into the magnetic separator. The medium flows between the separation roller, which rotates against the flow direction, and the housing into the coolant container. The...

...Schuh swirl pipes enable a linear and uniform capture of pollutants. Volume flow savings of up to 40% compared to conventional extraction hoods are possible. The swirl pipes from Schuh Anlagentechnik ensure a linear and uniform capture across the entire slot width and are combined with a physical separation. Compared to traditional hood technology, the volume flow can be reduced by up to 40% while maintaining the same extraction efficiency and significantly less space requirement. This saves energy and reduces operating costs in the long term.

...The proven membrane condensate separator made of material 1.4301, featuring a union nut made of material 1.4301 and a welded socket made of material 1.4435, executed as orbital welds.

...- Cleaning fireplaces and stoves. - Aspiration from carpentry machines. - Suction of shavings and metal dust from metalworking machines. - Transport, dust collection and collection of dry mixes and materials. It consists of: - Centrifugal fan with outboard motor – 2.2 kW; 3000 rpm Single-phase or three-phase; Flow rate – 1500 cubic meters / hour; Pressure 4500 Pa. - Main suction cyclone separator + airtight hopper 40 liters with release cover for collecting larger particles over 10 microns. - Cyclone filter box + airtight hopper 40 liters with release cap for finer powder up to 1 micron.

...The Easy Clean Flow Magnetic Separator removes metal particles >30 µm from powders in the food industry and other sectors. It features user-friendly cleaning, improved flow, and a high Gauss value of the rods.

...Using a turbo disc in the inlet, the volumetric flow is converted into a rotational motion. Centrifugal forces facilitate particle separation.