viscosity

...The first flow meter with a touchscreen display and backlighting impresses with its simple, user-friendly display and operation, the multilingual interface, and its compact design. Thanks to the rotating eccentric disc and a magnet, it enables accurate measurement of the volumetric flow rate, measuring thin to medium-viscosity media such as water and mineral oils precisely, quickly, and above all...

...Ask for a test unit and see for yourself! Advantages Promix Visco-P inline viscosity measurement ,Continuous monitoring of raw material quality and process conditions in real time ,Raw material cost reduction through active raw material management ,Precise inline viscosity measurement in the melt stream – without bypass ,Suitable for all viscous media ,Additional benefit of melt and temperature homogenization in the Promix melt blender, which also serves as a measuring section ,Can be integrated into any extrusion line ,Test units available...

... technical documentation, which helps our customers assemble the peripheral components themselves. Heating temperature: 20 - 400°C Pressure, process side: < 1 mbar to 30 bar Product viscosity: 20 - 10,000 Pa·s Operating mode: Continuous...

...Strong, water-based adhesive disperion for heat transfers. ✔ For many materials ✔ Different application temperature ✔ Low Viscosity ✔ Great price ✔ Clear coating Our water-based adhesive dispersions are made for heat transfer printing. With different base materials from PU to acrylics, we can create the right adhesive for your applications. Our main products are the MT-I adhesive, which adheres...

... VISCOPOWER TR for horizontal use: For media up to max. 100,000 mPas (industrial & hygiene) Flow rate: max. 80 l/min Delivery pressure: max. 15 bar Viscosity: min. 1 mPas - max. 80,000 mPas Outer pipe diameter: 53 mm Immersion depth: 700, 1000, 1200, 1500 Material outer pipe: Stainless steel Seal: Open mechanical seal or closed mechanical seal Container: 1000 liter IBC, 200 liter barrels, canisters, hobbocks, tanks larger than 1000 liters...

...can work in wide viscosity range Strong contruction High capacity and high efficiency Heat protection for fluid Low risk of cavitation USAGE AREAS Chemical Industry Food Industry...

...Adhesion of rubber sealing profiles of all kinds, e.g., on doors, windows, sliding roofs, etc. Solid foam rubber and Viton, repair of hoses, dust caps. Properties: Viscosity: 30 mPas, low viscosity, clear, colorless, density 1.05 – 1.10 g/cm³.

Vitchem is a Hamburg-based company specializing in the production of additives and has over 10 years of experience in the fields of dry mortar, concrete additives, and paints. We offer our customers tailored, high-quality products as well as comprehensive technical support. With a professional laboratory operated by experienced technicians, we ensure that our products are stable and reliable. Our ...

... adapt to different pressure conditions and enables the user to correlate their paint viscosity control with the current printing results. The key features of the inline sensor are: - Integration into the color cycle via a bypass - Use of high-quality materials (stainless steel) - Maintenance-free operation - No rotating parts and no mechanical seals - Continuous measurements, no time-dependent measurement points - Usable for water-based and solvent-based paints - Viscosity range from 1 to 1,000 centipoise...

... hoses are easy to clean and can be replaced if necessary. The self-priming peristaltic pump is also suitable for dirty or particle-laden substances with a viscosity of up to 500 mPas. The gentle pumping action ensures that the sample remains unchanged. With a suction depth of 5 meters, the battery-operated Vampir sample collector can easily extract samples from lower sampling points, such as barrels, tanks, wells, oil separators, wastewater treatment plants, and sewage treatment facilities. Suction depth: up to 5 meters...

... treating facilities as storage reservoirs for the bitumen to be used in several works. Design for horizontal bitumen tanks is specially tailored to manage the unique properties of bitumen. It is designed to be quite difficult to handle at low temperatures because of its high viscosity. These are fitted with systems to keep the bitumen at the right temperature, ensuring it stays within an easy workable state for transportation and easy use. It offers a controlled environment of storing bitumen to ensure that the material is always ready for construction and industrial usages.

...IndustryLine Gama 3,000 lt/h D3RE Proportional doser developed for the car wash, printing, and metalworking industries in water systems with flow rates ranging from 10 lt/h to 3,000 lt/h. Optimized design and technology. Availability of micro and macro dosing. Available in various options, with a viscosity kit for viscous products, with and without bypass, in PVDF or standard, with external injection and special seals for strong organic acids in Kalrez.

...The ViscoMT-XM barrel emptying system with a volumetric pump based on the endless piston principle. Your advantages: - for medium to high-viscosity products (up to 7,000,000 mPas) - suitable for abrasive, shear-sensitive, or chunky and filler-loaded media - clean stripping of the barrel inner wall through a follower plate with a special sealing lip - applicable for cylindrical, ribbed, or...

... acquisition. The viscosity sensors are used as rotation sensors, inline sensors or resonance frequency sensors, depending on the area of application. The connected controller is freely parameterisable and can be connected directly to higher-level control systems via an interface.

...Fullmono HD Series, is a high performance monograde engine oil which is formulated with quality base oils and special additives. It is recommended to choose the viscosity grade in accordance to climate conditions. ...

... hydraulic separation of the working chambers in this series is partly achieved by means of pressure and viscosity-dependent throttle sections. HSS motors are ideal for generating oscillating swivel movements in the frequency range with small angular amplitudes in controlled systems. The HSS series is therefore recommended for use whenever semi-dynamic torsion tests need to be carried out reliably and cost-effectively. Specific torque [Nm/bar]:32,80 Operating pressure [bar]:280 Nominal torque [Nm]:9184 Swivelling angle [ degrees° ]:120...

...The absorbent socks and mats for oil spill response are highly absorbent - meaning that per kilogram of absorbent material, approximately 46 liters of gasoline, 54 liters of diesel, 70 to 85 liters of crude oil (depending on viscosity), and 93 liters of motor oil can be captured according to ASTM F726-12. The absorbency is therefore about 8 to 16 times greater per kg than conventional products. They absorb oils but repel water-based liquids, ensuring that the absorbent materials remain buoyant even when saturated.

SPECIALISTS IN SILICONES AND ADHESIVES LUSOCOPLA, based in Santa Maria da Feira, specializes in the marketing of chemical products for various applications (aerospace, aviation and defense, naval, optoelectronics and electronics, molding, prototyping, food, cork, construction, solar panels,…). In our product range, you will find the leading brands in the market: ELKEM, NUSIL, SIKA, BOSTIK, HUNTS...

...Our HA is made by a process called bio fermentation, non-animal source, biocompatible and bio-degradable. It has excellent quality (pharma-grade), formulation friendly viscosity. In general, HA can be used as derma filler, joint injectables, eye drops, regenerative medicine, skin care products and nutrition supplements.

... retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences NSF H1-registered Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):350 mm²/s...

...manual control with 3l or 10l reservoir made for low viscosity lubricants mechanical locking valve with manifold optional electropneumatic locking valve...

... acids, resulting in a solid, white wax. The properties of Lanette wax include its emulsifying ability, meaning it can mix well with oils and water to create creams and lotions. It also helps to increase the viscosity of products, making them thicker and easier to apply. WEIGHT: 25kg...

... at temperature. Importantly, the flash point of these fluids remains stable throughout their service life, thanks to their resilience against thermal cracking at recommended operating temperatures. Heat Transfer Oils are exceptionally thermally stable, ensuring an extended service life without the formation of deposits or viscosity increase. They feature specific heat and thermal conductivity properties that enable rapid dissipation of heat. Available in:Bulk, 1000 Litres, 200 Litres and 20 Litres. Item Code:VI6-2872 (12), VI6-2876 (21), VI6-2877 (25), VI6-2873 (32), VI6-2880 (68), VI6-2874 (90)...

... beneficial effect on the cardiovascular system - they reduce LDL (bad cholesterol), have anti-inflammatory properties, decrease blood viscosity, and reduce the tendency to form blood clots. On average, 100g provides 2681kj / 692kcal - 34% RDA * FAT 60.3g - 86%, including saturated fatty acids 6.56g - 33% carbohydrates 18g - 7%, including sugars 2.2g - 2% fiber 6.5g protein 16g - 32% salt 0.01g < 1% * reference nutritional value and &nbsp; <strong> Usage </strong> Nuts are a delicious c...

... Spec./ Purity:99% ( Other specifications can be customized) CAS Number:9000-30-0 Appearance:Creamy white free-flowing powder Main function:Acidity Regulators, Antioxidants Test Method:HPLC Odor&Taste:Characteristic Particle size (%):≥99% pass 200 mesh Moisture (w/%):≤15.0 PH:5.0-7.1 Viscosity 2 Hours1% solution:≥5500.0 Glactomannan%:≥82.0 Ash (w/%):≤1.5 Protein (w/%):≤7.0 Acid insolubles (w/%):≤7.0 Borate test:Absent Lead(Pb)/(mg/kg):NMT2ppm Arsenic (As)/(mg/kg):NMT3ppm Total Plate Count:NMT5000cfu/g General Status:Non-GMO,Allergen Free,Non-Irradiation...

...leaving your drains clear and your worries behind. Unrivaled Power, Unmatched Results Powered by the strength of sodium hydroxide,EMOOL Liquid Drain Cleaner goes to work instantly, breaking down grease, hair, soap scum, and other organic matter that cause blockages. Its high viscosity ensures that it clings to pipe walls, delivering deep-cleaning action where it’s needed most. Say goodbye to repeated plunging and snaking – with EMOOL, one application is all it takes to restore flow to your drains. SKU:11-1...

... high color strength in printing. It has high brightness. APPLICATION Used as water based ink on flexographic printing machine. Mix well before use. Printing viscosity is 18-22 s (Din cup N°4). The product should be diluted with water. Packaging is 20KG tinplate bucket. * The information on this technical data sheet is based on our general experience. ...

...The SL series are agitators equipped with direct drive motors – 700 / 900 / 1400 rpm. Fitted with marine-type turbines, these devices are available in either stainless steel 304 or 316, or coated with ebonite, PVC, Halar, etc. They are suitable for turbulent mixing or dissolutions in small capacity tanks and low viscosity products. Due to the high speeds, dry running is completely prohibited for...

...Sweet creamy fillings in a moulded, crisp extrudate shell The latest in sophisticated products from direct extrusion are the co-extruded, centre filled products. In these products a soft filling with a pumpable viscosity is metered continuously, using a suitable pump, into an extruded pipe, simultaneously while it is being extruded. A special design co-extrusion die is used for this purpose. The...

... flowering and fruit setting. It can be used as a foliar application as well as in an irrigation application. Certified for use in organic agriculture in compliance with EC 834/2007 and EC 889/2008. Liquid:1,25 kg/liter Dry matter 60%:Organic matter 39% Viscosity 150 cps at 20°C:pH 6-8...