vessels test

...As the NW 400 sight glasses required for the vessel were not standard, an exceptional 3.2 inspection needed to be carried out for them. FMS created a suitable testing fixture for this inspection and then successfully carried out a type examination together with the Technical Inspection Association (TÜV). Design/planning Preparation of pre-test documents for the TÜV Procurement of all materials Pressure and burst tests for the sight glasses Welding Mechanical engineering Surface treatment Fully assembly TÜV acceptance of the pressure and leak test (using SF6 gas) Documentation and acceptance ...

...In order to prove the quality of the fluid-carrying parts, all hoses, pipes, pressure vessels and other components are put under pressure until they burst. The process is precisely measured and documented in order to optimally design the components for specific applications.

...) Pharmaceutical and biotech apparatuses are calculated and manufactured according to your requirements. Stainless steel and special materials are used in the production. After that, the products are grinded, electropolished and tested using non-destructive testing methods, such as ferrite measurements, used for the determination of the ferrite content, or by using the riboflavin test to measure total discharge and CIP/SIP capability. All materials, methods and processes used have been documented in full in detailed QA documents and can be tracked at any time. You can depend on KASAG. ...

...during application. Do not apply on mineral surfaces (like plaster and bricks) destined to be visible, without carrying out a preliminary test, as you latent salts may crystallise! Apply from 0.15 to 0.30 kg of Consilex San per square metre of surface to be treated. Packaging: 10 kg can UM: €/kg...

... Excellent plastic and elastomer compatibility For long-term lubrication of lubrication points subjected to high pressure up to 300°C Operating temperature:-40 °C → +280 °C NLGI grade:2 DN factor (dm x n):500,000 mm/min Base oil viscosity (40 °C):390 mm²/s Four-ball test rig (welding load):> 10,000 N...

... regulations for pressure vessels, each heat-exchanger is submitted to a pressure and a leak test. All products are designed individually for the appropriate application and manufactured accordingly. -:pressure from vacuum up to 40 bar -:usable in temperatures -100 °C to 250 °C -:high heat transfer coefficient -:low logarithmic temperature differences -:compact design -:low weight compared to...

... detection jobs industry can offer. The UL1000 is optimized to provide quick, accurate results in any application from the leak checking of large vessels and systems to high-cycle, repetitive component testing - 24 hours / 7 days a week - in the toughest industrial environments. With the addition of the TC1000 Test Chamber accessory, the UL1000 Helium Leak Detector provides easy, fast and accurate...

...With Güpoflex - Leak Detector, you can test: fittings, pressure vessels, soldered, screwed, and welded connections, pipelines, hoses, and valves. In short: everything that needs to be leak-proof. Spray suspicious areas. Visible foam bubbles will appear at leak points. Simple, safe, quick, and clean. Güpoflex - Leak Detector is non-flammable, non-corrosive, and poses no toxicological concerns. Packaging sizes for aerosols and non-pressurized products: 500 ml spray can, 125 ml spray can, 25 ml spray can, 500 ml pump bottle 5 l canister, 10 l cubitainer, 200 l barrel...

...Health and Lifestyle Tests - Easily Conducted from Home. Fatty Acid Analysis with the Blood Test blue balance® Omega 3 Check Many people in Germany do not consume enough Omega 3 fatty acids. Sufficient Omega fatty acids are important for the health of the heart and blood vessels, the brain, and for maintaining good blood pressure. Does your diet really contain all the nutrients you need to stay...

...The test execution is particularly straightforward due to the reagent vessels that are already pre-filled with buffer. It allows for a reliable test result within 15 minutes. * Sensitivity: 95.37% * Specificity: 99.13% * pre-filled * Sample collection: deep nasopharyngeal swab * For use only by medical professionals or trained personnel * 40 tests per pack (pre-filled) * 480 pieces per carton = 12 packs...

... microns Leak test and certificate of conformity Compliant with the decree of July 1, 2004 Class B Tank Interior and/or exterior coating Stainless steel manufacturing Single-walled tank (SW) Retention basin Wide cradles (load-bearing slab ≥ 0.15 N/mm² and < 1.9 mm²) Other diameter Model: CUVACAE In stock: 2 Products...

... vessels - Licensed test from our subcontractors from TUV - Technical consultation regarding maintenance Consultation - 2D and 3D design expertise - Process simulation and analysis - Assembly and maintenance...

...We manufacture containers up to a piece weight of 10 tons according to your specifications using CAD stations. This includes, for example: pressure vessels, dryer housings, centrifuge housings, vibration dampers, filter containers, fan housings, test bodies, wet scrubbers, and filter pots. Manufactured in: Germany...

... with test magnet Easy: — No calibration or adjustment required — Plug & play without any specific tools Measuring Principle:Conductive Characteristic / Application:Compact point level switch for using in pipes and in storage, mixing and process vessels with or wit Specialities:CIP and SIP suitable; Conductive foam is detectable or can be switched off Supply / Communication:10…30 V DC Ambient...

...Ultravist 370mg I/ml Injection is known as a contrast agent. It is injected into the body before an X-ray test or CT scan to enhance the visibility of internal body structures like blood vessels and non-bony structures.

... custom specific nozzle orientation GENERAL Absorption silencers type VSD are used to reduce noise by the control valve up to 30 dB. The design is carried out as a steel welded construction in a horizontal design. FUNCTION in progress QUALITY MANAGEMENT DIN EN ISO 9001 certified Our vessels are tested according to AD 2000 regulations and CE-certified according to EC / PED 2014/68 / EU. The examination is carried out by authorized inspectors (TÜV, Lloyd’s Register, etc.). Test and material certificates are prepared by the inspectors according to the design specification.

... construction, structural steelworks, pressure vessels, power plants, mining equipment etc. All steel is supplied with full mill test certificates to DIN EN 10204-3.1. Payment: L/C, T/T, Cheque, Transfer, Cash, VISA. ...

... - Oil level - Oil pressure - Dimmer for night navigation - Test function Due to its suitability for proportional S/W valves, the system is recommended for new builds and retrofitting existing installations, and can always be expanded to a combined pilot. In the background, our proven hydraulic pump operates, driven by the main engine (PTO / V-belt), or as an electric pump optionally with 400 / 230 / 24 V.

...The HATCHecker is an ultrasound solution designed to test the integrity of vessels for weathertightness. Use HATCHecker to pinpoint the exact location of leaks in hatch covers. Focused Hatch cover leakage and wetting damage to cargo are a persistent problem in the marine industry. Confirm that hatch covers are weathertight and compliant with ruling regulations by using the new HATCHecker which...

... in the following areas: Design according to harmonized standards or other specifications Material selection Calculation: Calculation methods (DBF) or analytical proof of admissibility (Finite Elements) Construction: 3D models, 2D manufacturing drawings, models for CAM production Manufacturing: Everything from raw material procurement to acceptance, all from a single source Testing: All necessary non-destructive tests and pressure tests are carried out. Additionally, there is the possibility to create test instructions in the areas of VT and PT.

...Trust only the original: Steristopfen® from Heinz Herenz Hamburg! Steristopfen® made from cellulose have proven to be the ideal sterile closure for bacterial cultures in test tubes, Erlenmeyer flasks, and culture vessels in many prominent institutions for years. Steristopfen® is an invention of Heinz Herenz, protected by patents both domestically and internationally. ... are autoclavable up to 200°C ... are bacteria-filtering ... are sterilizable ... are air-permeable ... streamline laboratory work ... are still cost-effective! ... are designed for single use...

... this name in every directive, a document with the same content is often required under different names. For example, it is referred to as the Technical File for Toys, while names such as Design Document for Non-Automatic Weighing Instruments and Design and Manufacturing File for Simple Pressure Vessels are used.

...-corrosion-coatings up to category C5M are possible. Of course, we meet all the other specifications, e.g. regarding coating thickness, as well. The electrical engineering is also done in the Nash location, from design to cabling. After the completion, the system undergoes a pressure test. Furthermore there is an option to do a complete function test to verify the performance data. Nash is certified according to ISO 9001 and ISO 14001.

...Volume measuring devices: Measuring flasks - Measuring cylinders - Measuring pipettes - Volumetric pipettes - Burettes - Automatic burettes - Tilt attachments - Sedimentation vessels - Pycnometer - Nessler cylinders Determination of hydrocarbons - COD determination - Determination of putrefaction behavior DAB: Limit test for arsenic - Determination of essential oils - Determination of water content - Limit test for fluoride...

... international standards (BV, DNV, shock resistance, military certifications…). We can also test the various equipment, particularly for vibration. Our expertise and skills enable us to position ourselves on the most complex systems. FL Marine has notably supplied steering devices for the French Navy's C70 programs, as well as the Sawari 1 programs in Saudi Arabia and Delta in Singapore. We have also participated in the FREMM project for stabilization through rudders.

... appliances. Upon request, it provides washing and degreasing services for parts, various types of edging, drilling (both central and lateral), and also produces flanged domes, securing the flange through mechanical crimping, without the need for welding. Our Quality office is important: we can perform any type of test or measurement, particularly regarding the verification of tolerances and final thicknesses. We carry out the verification of CP-CPK values to obtain free-pass supply. The automation of systems in line with Industry 4.0 has allowed us to improve production performance.</p>...

...-Heinz Burre quickly recognized that the future lay in hydraulic controls and devices, and he oriented the company accordingly. He took on this challenge and often ventured into technical uncharted territory. He was significantly involved in the automation of machines for the textile industry. But he was also successfully active in other technical areas; for example, he developed an automatic hatch cover control for ocean-going vessels. In line with this development, the production area has steadily grown and now exceeds 5000 m².

Pressure tests with system and quality. We test according to standards. We conduct pressure tests for pipelines, equipment, and pressure vessels according to various regulations for you. We fill and empty. We fill and empty your pipelines and containers with air, nitrogen, water, or your product. We apply pressure. We pressurize your pipelines and containers, possibly also with your product. We...

... Carrier, Platform Supply vessels, and DP Deep Water Drilling Rig MODU). GL Marine Surveyors S.r.l.s. offers the following services: Draft Survey - Condition Survey - Cargo Hold Hatches Covers Weather Tight Test using Ultrasonic Tester (ABS Type Approved Product) - Bunker Survey - Delivery & Re-delivery Certificate - Cargo Holds Sealing and Un-sealing Certificate - Cargo Holds Inspection Certificate - Cargo Load and Discharge Operation Survey with Final Report, Tally, and Weighing Control. The geographical area covered by GL Marine Surveyors includes all Italian Ports.

... of welded joints in metal structures and vessels of welded joints in reinforcement and embedded parts of welded joints in steel and polymer pipelines of various purposes of test – qualification welded joints of control welded joints – CWJ of discontinuity flaws in rolled stock, forgings and castings Radiographic – X-ray inspection of welded joints in metal structures and vessels of welded...