system 1 Switzerland

...process visualization by means of trend charts, operator-definable operating limits, data acquisition, and synchronization of the dosing rate with the extruder output. Implementation in the extruder control system via fieldbus system is also possible. •,Mass flow from 1 g/h up to 20'000 g/h •,Dosing pressure up to 680 bar...

... (Motor Under Test) at a low speed from 1 to 10 rpm (respectively 8 rpm for CTS 103 and CTS 104), while acquiring its cogging torque related to angle position. The torque measurement covers a range up to 1 N∙m (depending on the selected torque sensor) with an accuracy of ± 0.1 mN∙m (for TS 100 – 50 mN∙m and TS 101 – 100 mN∙m). The executable software controls the system and displays acquired data. It...

...The set consists of: - 2 x MaxQuano, mattress with Cashmere and Silver Tech cover, dimensions 90x200 cm - 1 x ExtraQuano - double therapeutic overlay, dimensions 180x200 cm MaxQuano: The basis for healthy, regenerative sleep is a well-chosen mattress. Luxurious Quanomed® mattresses made of 100% natural latex ensure optimal positioning of the entire body and maintain constant air circulation. Our...

...All functions are controlled by a Siemens PLC with touch screen. Max. power consumption:5.6 kW (7.5 HP) Dimensions (L x W x H):1'560 x 800 x 1‘450 mm (61 x 32 x 57 in) CO2 inlet connection:1“ BSP female...

...As a MedTech version with logging for dental implants and screws. All common blasting media can be used. Complete autonomy through robotic loading (optional). The fine blasting system FG2-35-2-1 is specifically designed for the automatic processing of small to medium production series of rotationally symmetrical medical parts, such as dental implants, with the highest process reliability.

...Load capacity of 1,000 to 3,000 kg/m2 • Fireproof and non-conductive panels • Modular system 600 x 600mm • Adjustable floor heights • Galvanized steel substructure (pedestals, stringers, lateral braces…) • Grilles or perforated panels for air conditioning circulation • Accessories: steps, ramps, and panel lifts Seismic support: enhances the seismic resistance of the floor in this area...

...Show Product Variants Safely dispose of medical, laboratory, and infectious waste with the UN-approved Pacazur containers made from polypropylene. Patented lid system (hole opening 130 mm) allows for easy temporary closure by screwing it in. The click-on hinge lid is equipped with a sealing tape to ensure safe handling after final closure. Marked with filling limit & barcode, and labeled according to ADR 6.2 and EN ISO 23907. Autoclavable (without lid) max. 134°C/ 1 hour. 30 l: 50 l...

... - Sorting different parts - Inspection Cycle time: < 1 second Autonomy: freely selectable thanks to SIGMA transfer system Control: Siemens S7-1500 Product changeover: < 2 minutes Training new products: < 5 minutes ESD compatible: Yes...

...Fan-assisted respiratory protection device with integrated airflow sensor and 3-stage adjustable airflow. With the e3000X fan-assisted respiratory protection system, optrel guarantees: — Protection of the highest class (TH3) against alveolar particles (smoke, aerosol, and dust). The breathing air is up to 500 times cleaner. — Even air distribution in the fresh air helmet without eye irritation...

...The IST AG LFS1505 conductivity sensor offers a typical cell constant of 0.68 cm-1 and a conductivity measuring range from 100 μS/cm to 200 mS/cm (extended range from 10 μS/cm to 200 mS/cm possible with cell-constant correction) within an operating temperature range of -30 °C to +100 °C. However, it easily withstands temperatures over 130 °C enabling processes like sterilization by autoclaving...

...The CLA TSF-000 through TSF-5 are bidirectional, inductive type torque sensors. The measurement system is composed of an axis mounted on flexible pivots with cruciform springs allowing frictionless torque measurement. The axis rotation angle measurement, which is proportional to the measured torque, is performed via an inductive displacement sensor with carrier frequency. The small rotation angle, approximately 1° for all measurement range, allows very good linearity and negligible hysteresis.

...This allows the system to be sealed very effectively with a radial shaft seal over the spindle shaft. Spindle nominal diameter: from 10 mm to 60 mm Lead: from 1 mm to 30 mm Dynamic load ratings: up to Cdyn 300 kN Static load ratings: up to Cstat 650 kN...

...The DCX-22AA data loggers compensate for changes in air pressure by means of a separate, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep measuring the water level, water pressure and...

... in two SO-DIMM slots mSATA: 1x mSATA Full-Mini Card combo socket with SATA 2.0 & USB 2.0 Processor: Intel Core i7-3612QE 2.1/3.1GHz, Intel 64 architecture, enhanced Intel SpeedStep, Quad core SATA: 2 x SATA 3.0 ports, 2 x SATA 2.0 ports, all ESD protected RAID 0/1/5/10 support TPM: Trusted Platform Module v1.2 (Atmel AT97SC3204) soldered on board Watchdog Timer: Configurable granularity 1-255 sec. or 1-255 min.

...metal-sealing flange ball valve type JBFM, DN15 - DN200 (1/2in - 8in) versions PN16/40, PN100, ANSI cl. 150, 300, 600, high-temperature version up to 500°C Two-part flange ball valve with standard length according to DIN or ANSI. Antistatic, firesafe, ISO emission test, length according to DIN EN558-1 series 5, 14, 15 or ANSI B16.10. Bi-directional design, live loading system. Seat tightness in standard Class V (according to FCI70-2). Operating temperatures up to a maximum of 500°C, other versions available upon request.

...The Sonnenschein SL-350/P lithium battery in the size 1/2 AA is a solder-in battery that is versatile and based on a Li/SOCI2 system. It has since been replaced by a successor from Tadiran, which is identical in design. However, the Sonnenschein battery is still available in limited quantities in our shop. It has a nominal capacity of 1.0 Ah and a nominal voltage of 3.6 V. The nominal current is...

...The Medela RCS reusable collection system consists of autoclavable collection containers with lids and integrated overflow protection. All four container sizes (1, 2, 3, and 5 liters) have the same lid size, which simplifies handling and reduces logistical effort. • Quick connectors make the system ready for use in seconds. • No risk of overflow thanks to built-in overflow protection. • The hoses can be quickly connected due to clearly marked vacuum and patient connections. Medela RCS - STRAIGHTFORWARD AND LASTING Sizes: Containers in 1, 2, 3, 5 liters Container material: PSU...

...Our coil systems are specially designed to generate very large magnetic fields in 1 to 3 dimensions. Every system essentially consists of 2 units: The coil system and the current control system to set the coil currents. The systems can be used for calibration, to compensate external fields, to generate specific magnetic fields, magnetic gradients etc. Our specification scope ranges from...

...Laboratory pressure reactor system - easy operation for heavy pressure vessels Reactor volume: 0.5 to 20.0 liter Pressure: -1 (FV) to +60 / 200 bar Temperature: -20 °C to +250 °C Material: stainless steel, Hastelloy®, glass-lined steel Other materials, pressures & temperatures are available This multipurpose pressure reactor system is designed for the use of large steel pressure vessels...

...With our state-of-the-art 3D plasma cutting system, we offer plasma cuts of spherical bottoms, dished ends, pipes, profiles, and sheets in material thicknesses ranging from 1 to 50 mm. Sheet size: 2,000 x 3,000 mm (2,000 x 6,000 mm) Pipes, profiles: Diameter 30 - 500 mm / Length 3,000 mm (6,000 mm) Bottoms, cones: Up to diameter 2,500 mm Material thickness: 1 - 50 mm...

... your favorite aromatic notes wherever you go. Warranty 1-year warranty against manufacturing defects in the diffuser's electrical circuit. The warranty does not cover damages resulting from misuse, drops, disassembly, or repairs by unauthorized persons. A repair or standard exchange performed during the warranty period does not affect the expiration date of this warranty. Device dimensions: Ø 10 cm – H. 4.5 cm Diffusion area: up to 20m2 Lighting: LED Operates on USB port: 5V (USB cable included) or with 3 LR03 batteries (not included) Reference: 91113...

... price of 1 packaged unit that matters, but also the price of the product: •Flexibility of delivery dates and minimum order quantity •Terms of payment •Logistics solutions •Packaging option •Audit status •Development support •Potential of the contract manufacturer Depending on your individual requirements profile, we find suitable contract manufacturers with our carefully prepared tender...

... The cards are die-cut nick-free, stripped out inline, shingled and fed to the ACC 550 HS Card Collator via a conveyor belt. The ACC 550 HS stacks each row into a complete deck and feeds it to a downstream packaging system that may include over wrappers, banding machines, packaging machines or packing table conveyors. With production rates of up to 2,000 decks per hour, the highest quality cutting, makeready times in under 1 hour and an automated delivery that reduces labor to a single person, the BOGRAMA Automated Card Production System has the ROI needed to be the market leader.

...AirLoc precision leveling shoes with a 4-wedge duo system are designed for heavy loads of up to 100 tons. The adjustment mechanism allows for precise and quick leveling of large loads to an accuracy of 1 / 100 mm, with minimal effort. AirLoc leveling shoes with an eccentric leveling screw (types 2006-VRC to 2024-VRC) complete our range. This is your competitive advantage when precision and quality of your products matter.

...The Liquiline CM442 is a digital multiparameter transmitter for monitoring and controlling processes in any application. The 1 to 2-channel transmitter saves time and money through its easy system integration, simple configuration, and reduced need for spare parts inventory. The Liquiline CM442 offers all the advantages of an exceptional transmitter platform, from utmost simplicity to maximum...

... EPOS2 and EPOS3 (Easy Positioning System) controllers, a modular product line is available for DC brushed and brushless motors. The newest addition to the high-performance range of positioning controllers are the MAXPOS controllers. Current and speed controllers: DEC Module: 1-quadrant brushless DC (maxon EC) motor amplifier for speed control ESCON: 4-quadrant servo controller for current and...

...The SigmaLine lll connects digital printing and print finishing into one unique complete system, allowing fully automated production in one pass – from the PDF file to the gathered book block, even for VDP production down to print runs of one copy. With web widths between 20” and 42” and power of up to 1,000 fpm (305 m/min), it is the most flexible, efficient and costeffective system for digital printing applications on the market. Max. web peed:1000 feet/minute or 305m/min Web width:20" - 42"...

...The BENDCHECK system is suitable for in-line production optimization in the steel and metal industry. The measuring solution enables in-line quality assurance in the production of tubes and rods and eliminates the need for complex manual straightness measurements. Properties: Synchronous real-time scan to monitor bending of the product 3 to 5 non-contact measuring stations with 1 to 3...

...-88-CNC unit meets the most common needs: drilling, milling, reaming and tapping. It can be equipped with two spindles and installed horizontally or vertically Number of stations:up to 30 stations Indexing accuracy with Hirth coupling:±2“ (±3 µm with Ø of 800 mm) Indexing accuracy table with drive:±1 µm Loading/Unloading:automatic Platform dimensions:Ø 4’400 mm Number of spindles:up to 58 spindles Indexing time with Hirth coupling:2,0 s Indexing time table with drive:3,5 s Installation dimensions:6’400 mm x 9’300 mm, height 3’360 mm Required floor loading:min. 1’500 kg/m²...

... Wire draw-in speed:Max. 6 m/s (19 ft/s) roller drive Outer diameter of conductor:Max. 5.1 mm (0.20 in) Length range:60 – 65 000 mm (2.35 in – 213 ft) Full stripping:0.1 – 15.5 mm (0.004 – 0.6 in) Half stripping:15.5 mm (0.6 in) Crimp force:1 – 22 kN (224 – 4‘496 lbf.) Process modules side 1 / 2:2 / 2 Noise level:< 80 dB (without crimp tool) Electrical connection:3 × 208 – 480 V / 50 – 60 Hz / 5.6 k...