nbr Switzerland

...Our patented problem solver. Convinced by its unsurpassed service friendliness. Especially proven in the conveying and control of abrasive media. screw connection G 2”, G2½", G 3” DN50, DN65, DN80 housing, not in contact with medium:aluminium casting G-Al Si 7 Mg, age-hardened, powder-coated silver-grey threaded cover:POM plastic (polyoxymethylene), natural white o-ring:nitrile rubber NBR screws:galvanized steel sleeve:as selected...

...Plate material made of AISI 304, AISI 316, Alloy, Titanium, pressure plates made of unalloyed steel, primed and painted, seals made of NBR or EPDM, operating temperature up to 110°C Operating pressure from PN6 to PN25 Plate sizes up to 3.8 m² per plate SVGW certification...

...NBR compounds certified according EN682 for the production of sealings and other products for gas applications.

...Low volume increase under pressure, ideal as a drum hose Covering, Perbunan (NBR), oil and weather resistant, abrasion resistant, black, low-stretch textile fabric, diesel, gasoline, and oil resistant Burst pressure 30 bar: Weight 0.8 kg/m...

...Material Selection: Butyl, CR, CSM, FKM, EPDM, HNBR, NR, NBR, PUR (Polyurethane, Vulkollan®) SBR, VMQ • Outstanding Features of Vulkollan® / Polyurethane: Adjustable properties, extremely high abrasion resistance, very low friction • Forms of Supply for PUR: Sheets from 0.5 to 50 mm thickness, rods 5 to 200 mm diameter, sheets in special formats 4000 x 2000 or 7000 x 1000 mm, strips...

... required component characteristics, a rod seal can be made from a single material or from multiple materials. Typical materials for the sealing and pre-tensioning elements of rod seals include thermoplastic polyurethane (TPU), polytetrafluoroethylene (PTFE), and acrylonitrile-butadiene rubber (NBR). For the support rings of rod seals, polyamide (PA), polyacetal (POM), or PTFE is usually used.

... pressure reducer from Berluto is available in connection sizes R 1/2" to R 1" with the same installation dimensions as standard market models (e.g., Honeywell Braukmann D06F, or Helveticus). Design Housing made of red brass, spring cover made of fiberglass-reinforced plastic (up to DN 32, from DN 40 made of gray cast iron), dirt filter screen made of stainless steel, seals made of NBR, membrane made of fabric-reinforced NBR, dual-sided pressure gauge connection G 1/4", connection fittings made of brass, DVGW certified up to DN 32.

...For demanding applications in construction machinery, agricultural machines, and stationary areas. Construction: • Synthetic NBR rubber • Pressure carrier, 4 high-tensile wire spiral layers • Cover synthetic rubber CR Application: • High-pressure hydraulic systems for use with petroleum-based fluids. • For demanding applications in construction machinery, agricultural machines, and stationary...

... connection to prevent dry running – lubrication of sealing cords – Swiss made in-house production – wide selection of pump types – available in mobile or stationary versions The Stöckli eccentric screw pump is available in mobile or stationary versions. max. delivery height: 200 m delivery rate at 540 RPM: 60 m³/h Advantages: ■ no lubrication required ■ no winding of foreign bodies ■ easy rotor replacement ■ suitable for gravel and sand sludge ■ rotor made of hardened, high-quality steel ■ stator made of special rubber NBR...

mobil Kunststoffprofile AG is an independently family-run company that specializes in the development and production of custom seals and plastic profiles made from elastomers (EPDM, NBR, etc.), soft thermoplastics (TPE, PVC, PUR, etc.), hard thermoplastics (ABS, PC, PP, etc.), fiber-reinforced plastics, and fire protection materials. We produce at the production sites in Berneck and Herisau...