sliding groove

...For nut width: 6 - 8 - 10 Thread: M4 - M8 Length of hammer screw: 16-60 mm ESD capable: breaks the anodized layer and creates a secure electrostatically dissipative connection Various materials possible: — Steel, galvanized — Stainless steel — Plastic PA Many different designs in lengths and widths available in the delivery range Custom designs available upon request Extras: Turning aid: Polyamide spot coating available upon request Surface: with dry sliding film, zinc-nickel or zinc-flake coating available upon request Note: Compatible flange nut available...

... sliding properties -Very well suited for materials with poor sliding properties such as TITANIUM -Form fit and stability ensured by the special alloy -Same roundness accuracy as users expect from a guide bushing -This alloy is not heat-sensitive and not abrasive -Prevents cold welding between material and guide bushing. Our extensive range of guide bushings offers everything you need for the production of your turned parts. Benefit from our diverse portfolio for CNC long turning machines.

... ceramic, Joint bearings, Joint heads, Hydraulic joint heads, Composite sliding bearings, Sintered sliding bearings, Solid sliding bearings, Graphite sliding bearings, Split housings, SN/SNK, I-12, F-5, Rolling bearing accessories, Retaining rings, Felt rings, Tension sleeves, Grooved nuts, Locking plates...

... of shafts with h tolerances or sliding fits. The shafts are secured using 2 set screws offset by 120° on the inner ring. Self-aligning bearings are delivered ready to install and lifetime lubricated with suitable bearing grease. Under normal usage, no further relubrication is necessary. Reference: 24230 Temperature range: -15 °C to +100 °C...

...The guide vanes control the inflow of water in turbines. These vanes run in sliding bearings. To give the bearings longer term protection from water infiltration, the inner sealing MANOY® system seal WP, type 428, was developed for standard specifications. Type 487 with integral scraper was designed for high specifications due to abrasive constituents in the water and/or long inspection intervals. The housing for this seal must be open. The profile dimensions of both versions can be customized to adapt to existing groove designs.

... machine is fully protected by safety guards, with a locked sliding door at the front and a similar window at the back. The side walls are equipped with metal doors that have a key and an electric safety lock. The valves are fed from the top of the machine. A gravity loader feeds the 3-position rotary table that inserts the valve into the workpiece spindle. After machining, the valve is discharged...

... shaft and sliding sleeve are correctly assembled: the markings => <= must face each other. Incorrectly assembled drive shafts result in uneven power transmission and lead to rapid wear. Execution Steel, untreated Drive cubes / pins / bearing bushings Case-hardened RoHS Upon request other lengths l 1 - l 2 Holes without hub groove Holes with square Holes with hexagon with other or different connection holes Execution in stainless steel...

...Sliding beam cart in a modular system. Floor construction with innovative frame profile and wood-based panel. Surface in beech decor. Cart powder-coated in RAL 5010 gentian blue. Tires made of gray thermoplastic rubber "trackless" with precision groove ball bearings, thread and foot protection. 2 swivel casters with brake and 2 fixed wheels.

...Digital Caliper IP67 (Shaft Groove Measurement) Mahr 16 Ewr-na...

...Sliding Door Element CPL Cherry Trend, wall-mounted Sliding door element Köhnlein CPL Cherry Trend, cross veneered, running hardware Drive 50 in silver color, for wall mounting without door frame (also available with door frame), stainless steel handle bar 325mm angular, floor guide and floor groove, Price for dimensions up to door leaf size 2100x1000mm Running hardware 2000mm Item number: VWS100...

...Profile slider ZN 40x80 enables the smooth guiding of a sliding element in profiles with groove 8, including 2 sliding shoes made of POM. With the included M6 hex nuts, mounting elements can be attached to the sliding carriage. No fastening materials included. Material: GD-ZN Weight: 0.044 kg Groove: 8...

... juries. This pursuit of ergonomics allows the operator to amplify the application of their force during operation, while the product design offers an effective and safe grip. The angle of operation limitation is achieved through a sliding groove for the end-of-stroke pins. Their compact size allows for numerous applications in limited maneuvering space. Discover the entire range and order online 24/7.

... 25 mm, and at the top, there are laser-cut aluminum cross motifs. This design also offers considerable privacy and has a very contemporary look. Do you like this model? Then you might also enjoy our Aluette Twister. Feel free to take a look at that as well. Type: Aluminum sliding gate Product name: Aluette Version: Standard...

...Plastic rim with a non-marking tire made of thermoplastic rubber with sliding bearing (/1), groove ball bearing (/5), or stainless steel groove ball bearing (/5R). Apparatus wheels and apparatus rollers We offer a comprehensive range of apparatus wheels and apparatus rollers for internal transport. To ensure a long lifespan for the wheels and rollers, we use high-quality materials and components. Various mounting options allow for flexible installation.

...Ball bushing guides, lead screws, carriages, support rails, rollers, pins, lubrication and cover flaps, cover strips, lubrication and wiper units, groove covers, linear bearing units and linear sliding bearing units, linear ball bearings, ball bushing guides, shafts and support rails, shaft supports, ball bushings, steel shafts, shaft supports, accessories for ball bushing guides, rolled lead...

... profiles have a groove at a 90° angle to the face of the rebate, designed to accommodate a neoprene sealing strip. At the height of the lock, the sealing strip must be replaced with a sliding piece to prevent wear on the sealing strip. A gap of 14 mm is provided between the opening and fixed parts to ensure perfect operation, as well as impeccable sealing and expansion. Screw-fixable hinges are recommended. In the case of an application with more than two hinges...

...Special gear with spiral internal groove for sliding stone. Extremely complex custom solution in terms of manufacturing.

... for schools and public buildings (building material class B1). School equipment Standard version: Depth 55 mm High-quality, anodized lightweight metal profiles (silver) Magnetically adhesive back panel in white, gentian blue, or anthracite Roller-mounted sliding doors made of safety glass (ESG) in aluminum guide with removal protection, lockable Display case with a continuous drilling groove for individual mounting Includes 10 magnets and 1 A4 insert pocket...

...): 125 x 250 mm Dimensions of tools (vertical): 125 x 180 mm Diameter of suction openings (4): 140 mm Diameter of tool for 1st shaft: 125 mm Minimum / maximum diameter of profiling tools (excluding 1st shaft): 110-200 mm Underneath the work surface maximum tool diameter (on vertical shafts): 160 mm Maximum groove tool diameter: 160 mm Voltage: 380/400 V – 50 Hz-3PH + N...

...Rectangular nuts are also known as sliding nuts or groove nuts. We manufacture rectangular nuts according to standards and specific customer requirements from stainless steel, steel, and brass. We produce rectangular nuts, also referred to as glide or sliding nuts, in various designs, with and without surface coatings. The thread sizes range from M2.5 to M12 (1/8" to 5/16"). The material...

...Safety Handwheels, Plastic Duroplast Material High-strength plastic (Duroplast PF), black, glossy Ring Aluminum, matte, anodized (ELESA Original Design) Standard version Coupling set for safety handwheel DIN 6885/2 hardened steel with ground sliding surfaces, mounting hole and hub groove in accordance with tolerance P9. Rotatable handle I.281+x in Duroplast Item number: VD.200 FP+I+ST 18 Weight: 1220 Standard: 70951 b.: 6 d2 H7: 18 d3: 39 d4 max: 26 d6: 35 -0.05 l1: 50 l2 ±0.2: 24 l3: 13 wmin: 4...

...Gate rollers and double track crown wheels made of steel or polyamide PA6 G, with groove ball bearings, angular ball bearings, sliding bearings, or keyway. Available with V-groove for angle profiles, rectangular groove for flat profiles, or round groove for semi-round profiles. Many gate rollers are also available as complete swivel wheels. For the rollers with a round groove, we also supply the matching semi-round profile.

... (PEEK) is the ideal material for guide bands. The material exhibits an above-average combination of strength and toughness. Even at high operating temperatures, it demonstrates exceptional load-bearing capacity, good sliding properties, and high impact resistance. A diagonal groove pattern in the guide bands additionally ensures the continuous exchange of the lubricant film during very small cylinder strokes. This effectively prevents deposits. The use of PEEK bands is worthwhile, as it significantly increases reliability and the...

...Food warming carts for simultaneous serving to guests. (two versions) Made of stainless steel. Body and doors are double-walled and insulated. Cabinet compartment with seamless deep-drawn support grooves for stainless steel grids or GN containers with a groove spacing of 115 mm, equipped with tilt protection. Doors with silicone seals. Door lock engages securely. One sliding handle on the front...

...All connected at both ends by 2 grooved caps, glued and screwed for good rigidity, forming a very rigid assembly). Equipped with: Automatic quick-clamp front vise (ESC models) Manual horizontal front vise (ESCH models) PCH carriage vise (sliding post in a groove) with 2 included stops Wood drawer under the work surface. Straight legs with a section of 100 mm for perfect stability Floor forming a box between the legs of the workbench Multi-functional options and accessories: (to discover on our website)...

... sliding lid is a practical gift packaging. There are two basic designs for the sliding lid. The classic push lid is usually made of plywood, while the flush sliding lid is typically made of solid wood. As the name 'flush sliding lid' suggests, a groove milling on the lid of the wooden box creates a surface that is flush with the frame. Dimensions, wood type, surface treatment, fittings, and internal division, as well as personalization, will be tailored together with you to the product and your brand.

...In this process, components are ground to a closely tolerated dimension or distortion after hardening is compensated. Axially continuous grooves in workpieces are ground to fit in depth and width. If a very fine functional surface is required, this is also possible. Applications • Manufacturing of sliding surfaces • High parallelism and squareness of functional areas • Sharpening of cutting...

... perpendicular stresses and determine the sliding direction. By the side of the guide two strips are coated with CM1 type anti-friction material, suitable to produce little friction to the sliding along the groove obtained in the upper part and coated with stainless steel; a sliding upper part, coated on the lower side with a couple of stainless steel plates which also cover the sides of the middle groove required for the case of the guide.

... steel up to about Rz=1200 N/mm² tensile strength, and non-ferrous metals such as aluminum, copper, brass, bronze (red brass), and plastics on our groove cutting machines. Please send us your drawing so we can check feasibility for you. Drive Technology: All types of rolling bearings such as ball, needle, or roller bearings from premium manufacturers or as imported goods. Bearing housings, bearing tension sleeves, shaft nuts. Drive belts of all kinds, roller chains, rack and pinion gears, bevel gears, sliding bearings, including maintenance-free ones. Please inquire.