sensors vibration

... watertight to IP66. We have a proven track record of several thousands of such sensors operating reliably around the world.TYPICAL USE Permanent outdoor monitoring of tall structures FEATURES Acceleration measurements along 2 axes Temperature measurement of the surface the sensor is attached to Signals transmission through 4-20mA current loops Embedded Lightning Protection Operation down to -40°C MODELS Standard High Resolution...

...The IST AG 600 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +600 °C.​ The sensors are a standard solution for various temperature applications. The RTDs are suitable for welding, crimping and brazing. Furthermore, the 600 °C Pt Temperature Sensor Series is vibration and temperature...

... displacement sensors are based on the magnetic principle: composed of a magnetic scale and a multi-channel read head that responds to changes in magnetic flux, they detect linear displacements with high accuracy and resolution. Principle: Incremental Measurement ranges: 0 ... 30 mm Resolution: 0.1 µm Output signal: TTL Protection class: IP53 Operating temperature range: 0 ... +50 °C Supply voltage: 5 V ± 5 % Electrical connection: Shielded cable Return spring: Yes Special features: Diameter 12 mm Special features: Vibration-resistant and dust-proof...

... between temperature and voltage corresponds to the characteristic curve for the Pt 1000 and is thus nearly linear. The assignment between temperature and output voltage is nearly freely selectable, the lesser temperature corresponding to the lesser output voltage. The sensor‘s lowest possible output voltage is 0.1 V and its greatest is 10 V. The output is overload-proof and short-circuit-proof. The sensor has no mechanical moving parts and so is not susceptible to vibration and soiling.

...Unbalance tolerance violations are detected immediately, preventing subsequent damage (e.g., costly spindle repairs). Operating Principle: A vibration sensor (probe) is placed on the spindle head. Mounting can be done via a magnetic base or bolted. This sensor captures the vibrations caused by unbalance. A speed sensor (optical, magnetic, or inductive) detects one pulse per...

... extreme temperatures in a range of -40...+150 °C without any problems and is insensitive to external influences such as dirt and dust. The new sensors with measuring ranges between 14 mm and 45 mm are also extremely compact and robust. This makes them ideal for use in difficult industrial environments or vibration measurements with larger amplitudes. Together with the TX electronics from eddylab GmbH and the eddy current software eddyMOTION, measurement data can be analyzed, visualized, and documented.

...Reliable vibration monitoring at the highest level with Hofmann's balancing technology As a cost-effective solution, the VibroGard-M is used for monitoring the condition of fans, pumps, or compressors. The compact vibration and rolling bearing monitor VibroGard-R 1500 is an economically attractive solution for monitoring motors, spindles, fans, or pumps. In addition, Hofmann offers a wide range of sensors suitable for various applications. Hofmann on YouTube: https://www.youtube.com/channel/UCKAWJO4lWIStI4Yi-Vqc0VQ...

... benefits: Vibration-proof Fast response time High temperature resistance (up to 1,200 °C) Various installation lengths can be supplied With cap nut Sheathed thermocouple NiCr-Ni, Type “K”, Class 1 Sensor diameter:3.0 mm Sheathing material:Nimonic75, double-walled Sensor length:110 mm Adapter sleeve:VA, 5.0 x 40 mm, with 4.0 x 10 mm supporting sleeve Line length:1,000 mm, 2,000 mm or 3,000 mm Line type:FEP-Teflon with Cu shield, AWG24F Temperature range of the line:up to 205 °C in continuous duty, 230 °C peak Connection:free ends Operating temperature:up to 1,200 °C...

...From milling machines to pumps to wind turbines – wherever condition monitoring of machines and systems is necessary, products from Pepperl+Fuchs for vibration monitoring help prevent unplanned downtimes and ensure the safety of personnel and equipment.

...EGE inductive sensors for high mechanical loads still work trouble-free even after 10 impacts of 8 Joule. The sensor protected by a solid stainless steel sleeve is thus particularly resistant to shock and vibration. They are ideal for areas where standard sensors could be damaged mechanically. EGE offers variants resistant to high pressure cleaning with protection class IP 68/IP69 for use at...

...The MJ10 series of platinum resistance thermometers (RTD) offers a unique solution for temperature measurement, featuring a removable interior and spring loading. This model is designed for easy sensor interchange, facilitating calibration and maintenance. The spring loading feature aids in vibration absorption, making it highly suitable for the marine sector. Constructed with AISI 316L material...

Pioneers. Innovators. Perfectionists. In short: Polytec For over 50 years, Polytec has been shedding light on darkness. With more than 400 employees worldwide, we develop, produce, and distribute optical measurement technology solutions for research and industry. Our innovative quality products enjoy an excellent reputation in the international specialist community. Day by day, we find tailored s...

... high signal stability and resolutions down to the micrometer range. Thanks to its high temperature stability, resistance to shock and vibration, and insensitivity to dirt, the induSENSOR DTD is ideal for industrial measurement tasks. Modern fieldbuses such as Ethernet, PROFINET or EtherCAT are supported via optionally available interface modules.

...repeat accuracy and travel speed is dependent on the electronics. Plugin connection to position indicators 21700 and 21702. Technical data Rating IP 67; EN 60529 (sensor head) Shock resistance 2000 m/s², 11 ms; EN 60068227 Vibration resistance 200 m/s², 50 Hz–2 kHz; EN 6006826 Temperature range Ambient temperature 0…60°C Storage temperature 10…70°C Assembly Installation must be carried out using the enclosed user information. A, reading distance sensor/tape ≤ 2 mm B, lateral offset ± 2 mm C, misalignment ± 3° D, pitch gradient ± 1° E, lateral gradient ± 3° Reference:21720...

... encoder giving 0.125° resolution (720 PPR). It also incorporates a light ring, giving the user visual feedback of the status of a tightening, when used with a Crane readout or data collector. The CheckStar Multi fits in line between the assembly tool and the fastener, measuring the actual torques applied and angular rotation of the fastener, under production conditions. Whatever the vibration and shock loads experienced, CheckStar Multi’s patented contact system ensures a connection is always maintained between the readout and the strain gauges. [...]...

...The vibration sensors VIBRO-M are intended to detect deliberate destruction of metal grids or metal shields. The alarm is generated in the case of sawing, drilling or multiple beats. Vibration sensors VIBRO-M are intended for detection of destruction of physical fences. The vibration sensor VIBRO-M used for the protection of window, door or gate grids. If the surface of detection allows...

...Valve Rotation Monitoring for reciprocating Diesel/HFO/Gas (Bio, NG) Engines. In conventional engine system all sensors are connected to outer parts of the engine components and coupled with cables for power and signalization. It was not possible to place sensors inside the engine, or on moving parts because of cable connections or explosive risks. VaRoM, is the first solution to be installed...

... pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced...

...Use in challenging environmental conditions. Telco sensors from Sitron are specifically designed for use in difficult environmental conditions. A wide range of systems is available, featuring either integrated electronics or external amplifiers. Areas of application Resistant to: Pollution, vibration, moisture, adjustment Such as in the wood industry, concrete plants, waste incineration plants, recycling facilities, etc. Denmark: Germany...

...Specially designed for weighing tanks, hybrid scales, and precise dosing systems. For use in EX zones 1, 2, 20, 21, 22, and FM DIV 1. Very precise strain gauge sensor for dosing Weighing range from 100 kg to 3 t Accuracy class D1 (0.04 %), C3 (0.015 %), and C6 (0.008 %) Suitable mounting kit: PR 6046 Stainless steel construction Vibration resistance...

... End-of-Line (EoL) testing devices by Novosim ensure post-production quality checks. They detect visual, auditory, and operational issues, guaranteeing flawless products for customers. Novosim's systems cover rotary systems, automotive components, noise, vibration, and specialized tests. These automated systems use sensors and data devices, with customizable test scenarios stored in a database. Test results ensure prompt approval of compliant products and flag defects, maintaining high-quality standards and customer satisfaction...

...Resolution max. 5000 pulses/revolution. Through hollow shaft up to max. ø15 mm. Robust bearing construction. -40 °C … +85 °C operating temperature. High shock and vibration resistance...

... (connector/socket). With its good vibration and shock values, the sensor is suitable for use in areas with rough environmental conditions. Interface:Analogue, CANopen, Relais Housing material:Aluminium AIMgSi 1, Stainless steel 1.4305, Stainless steel 1.4404 Measuring ranges available for ordering:±2g Design:65mm Number of relays:1, 2, 3, 4, 5 Electrical connection:Cable, Device connector M12 - connector/socket Output signal analogue:0 to 20 mA, 4 to 20 mA Device connector or cable:1 (fill in with cable only)...

...Read head for connection to position indicators LG20 and LH70 series Output signal: TTL A/B quadrature signal, compliant with EIA-422 Maximum resolution: 10μm Maximum response speed: 300m/min (varies depending on read head and setting) Extremely insensitive to even the harshest environmental conditions (IP65) Resistant to oil, dust, vibration and shock Resolution:10µm Output signal:TTL Linedriver RS422 Max. response speed:300m/min Power supply:5V DC Compatible displays:LG20, LH70 series...

... rotation direction and rotational speed. From the encoder signal, the speed and travel direction of locomotives, multiple units, and high-speed trains are determined. Features: reliable detection of rotation direction and rotational speed easy and quick installation shock and vibration resistant according to DIN 61373 Cat. 3 maintenance-free and wear-free operating temperature up to +125°C compact design...

...The Model 682C05 signal transmitter is used on the one hand to supply ICP(R)/IEPE vibration sensors and essentially to provide early warning of developing faults in rolling bearings, such as damage to the inner or outer ring, play and lack of lubrication. The unit provides two output signals, the vibration level and information about high-frequency peaks or shocks. The module also has a raw signal output for connecting machine condition analysers. For an individual offer, please contact us directly.

... sensors • Industrial control with 8" color display • When used in fully automated production systems, feed distances of up to 25 m are possible • Intuitive menu navigation via navigation and function keys • Display of all functions • Maintenance display and simple fault diagnosis • Custom software adaptation possible • Ideal for applications that do not require process monitoring • Rivet mandrel...

... is applied, the DMD 331 measures the difference in pressure between the positive and negative sides and converts this into a proportional electrical signal. Features: — Differential pressure 0 ... 20 mbar to 0 ... 16 bar — Accuracy: 0.5 % FSO — 2 piezoresistive pressure sensors — Media separation through stainless steel membrane made of 1.4435 — Differential pressure wet/wet — Permissible static pressure - unilaterally - up to 30 times the differential pressure range — Compact design — Mechanically robust and reliable under dynamic pressure loads as well as shock and vibration exposure...

... by Statek Inc, USA. Contact Euroquartz Sales or Technical for details. High temperature operation up to 200°C High schock resistance Hermetically sealed ceramic package Downhole instrumentation Rotary shaft sensors Underground boring tools Operating Temperature Range:-55°C to +200°C Temperature Coefficient (k):-0.035ppm/°C2 Shock, survival***:CX1VHT CX1VHT:1,000g, 1ms, ½ sine CX1HHT:1,000g, 1ms, ½ sine CX4VHT:5,000g, 0.3ms, ½ sine CX9VHT:5,000g, 0.3ms, ½ sine Vibration, survival:20g rms, 10~2000Hz...

...The PR871 sensor is designed for very high pressures and is made of treated and aged stainless steel. Fully machined from solid material, it exhibits excellent qualities of robustness, endurance, and corrosion resistance. The pressure-sensitive part, equipped with a piezo-resistive gauge bridge with metallic gauges, provides very good fatigue resistance. The conical metal/metal pressure connection with two reverse threads ensures excellent vibration resistance.