salt spray test

...Cover for a salt spray test facility The original plexiglass cover of this salt spray test system needed to be replaced by a new, much sturdier cover. This was designed and manufactured by TC on the basis of GRP profiles and GRP sheet material.

...Salt spray test NSS for metals and their alloys. Salt spray test CASS for decorative coatings made of copper-nickel-chromium or nickel-chromium and anodic coatings on aluminum.

... lasting water-repelling Excellently suited for producing non-slip dry, greenish protective films Outstanding corrosion and oxidation protection with lubricating effect No removal prior to commissioning, as compatible with all lubricants Waterproof and resistant to weathering, suitable for all climate zones Can be welded without degreasing Easily removable before coating Operating temperature:-40 °C → +70 °C Salt spray test:> 1,000 h with 10 µm layer thickness Layer thickness:approx. 10 µm for one-time application...

...— Installation in smooth holes — No milling required — Protrusion of 0 mm — No interfering edges — High-quality corrosion protection (zinc-nickel) with a salt spray test resistance of 720 h Material: Steel Dimension: M6 - M10 Clamping range: 2.5 - 5.5 mm Length: 18 - 22 mm...

... thermal insulation class). Thermal conductivity certified pursuant to UNI EN 12664. Sanawarme is the highest technological expression of Azichem in the context of renovating plasters. It is a product based on hydraulic lime, botticino, kaolin, calcium caseinate, Vichy salt, calcium carbonate, tartaric acid, ammonium salts, expanded perlite, cork powder and natural fibres. Sanawarme is...

... directly transferred to the outer wall With the wall cladding baskets, you can enhance any object with reinforced concrete walls in a unique way. Areas of application: - Cladding of retaining walls and buildings Point-welded wire mesh mats with zinc-aluminum coating (95% zinc, 5% aluminum) - Pre-assembled basket measuring 99.5 x 14.5 x 49 cm - Front wire thickness Ø 3.5 mm, other mesh wire thickness Ø 4.5 mm, mesh size 5x10 cm - Total construction depth only 16.5 cm - Tensile strength of all wire products min. 450 N/mm2 - 3,000 hours of salt spray fog test according to DIN EN ISO 9227-NSS...

...Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F16-SCCvT D mm:16 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 d1 mm:3.5 +0.1/ -0.1 d2 mm:6.6 +1/ 0 Force* N:57 Weight g:Temperature °C Temperature °C:280...

... Cabinet heated by water jacket on four sides and bottom Exposure zone lined with corrosion-resistant PVC sheets Clear cover allows viewing of test conditions Peaked cover prevents dripping of condensation onto samples Water seal Heated humidifying tower with air relief valve Automatic DI water fill to humidifying tower Automatic solution level control Digital temperature control and readouts Certified...

...This metal shell is made by progressive deep drawn stamping on 80T pnumatic press machine with +/-0.05mm tolerance for all dimensions, productivity is 60000pcs daily, which can be zinc or nickel plated with 24 hours for salt spray test. Item No:HT-074 Tolerance:0.05mm...

...The perfect salt spray chamber for your corrosion testing...

...Ineltec's salt fog test chambers are designed for testing samples in an artificial saline atmosphere, a process also known as "salt spray testing." Touch Screen There are options and accessories available.

...The first zinc spray with offshore certification. Ideal for repairs, aesthetic enhancement, touch-ups, as well as protection and priming of galvanized and non-galvanized materials. Up to 3 times more efficient than conventional zinc sprays. Awarded the German Resource Efficiency Prize and the Materialica Silver Award. Salt spray test: +500 hours Zinc content: 99.9 percent Color: Zinc-like Container: 400ml spray can Minimum order quantity: 252 cans...

...For the assessment of the corrosion resistance of a metallic material. Salt spray test according to DIN EN ISO 9227 NSS or CASS test Accredited according to DIN EN ISO/IEC 17025:2005!

... also provides reliable protection at drilling, cutting, and interface points, as well as serving as a primer for equipment and machine parts that are permanently exposed to the elements. Properties: - Fast-drying smooth, pore-free film - Spot-weldable, electrically conductive, and serves as a conductive intermediate layer - Heat resistant up to approximately 500°C. Zinc spray can be painted over; however, due to the variety of available paint systems, a compatibility test is necessary. DIN 53167 salt spray test, in conjunction with DIN 50021: 400/80 µm < 0.5 mm DIN 53151...

... phosphating before polyester paint finishing (ISO 12944 standard cat. C3, withstands 480h salt spray test ISO 9227). RAL 7033 shade (cement gray). Earthing system via copper or stainless steel terminal. Sealing principle tested and approved by APAVE. Baskets tested according to the ARDROX 996 P2 penetrant testing method. Installation Reference: BR ECODESIGN...

... standard in acetic salt spray test with interpretation according to ISO 10289) - Specific chrome plating: Nickel chrome, BS 500 hours class 10 Arcor BC2 (Oxynit / Black bar) Induction treatment type TP Tube: - Dimensions: Øint 20 to 330mm - Material: glazed tube tolerance H9 Ra=0.8 Max rolled tube tolerance H8 Ra=0.3 Max Stroke: 20 to 6000mm Normal operating pressure: 250 bars Feel free to consult us for any other requests.

...) - Neutral Salt Spray Test (NSS Test) - Acetic Acid Salt Spray Test (AASS Test) - Copper Accelerated Acetic Acid Salt Spray Test (CASS Test) - ASTM B117 Data retrieval via USB and LAN interface is also possible (optional).

...seizing, and wear, stick-slip phenomena, oxidation, fitting rust, and electrolytic reactions ("cold welding"). Base oil: Synthetic oil mixture Temperature resistance: -180 to 1,200 °C Size: 500 g Salt spray test: > 170 hours...

...Material: SPCC, SPB, SUS304, SUS316 Thickness: T0.1, T0.13, T0.14, T0.15, T0.18 nickel-plated Test: Pass 24-hour salt spray test...

... the salt spray test, which is conducted according to DIN 9227 standards, of 504 hours. The coating process is characterized by its environmental friendliness, as the excess powder is recovered and reused. Technological limits: 2500 x 800 x 1,500 mm (LxWxH) Straight profiles up to a total length of 3000 mm...

... thick layer black passivation; various sealings) • Copper • Nickel • Tin (matte and shiny) • Silver • Hard silver • Tampon galvanizing • Hydrogen embrittlement relief (tempering) • Mass finishing • Salt spray test Quality Management for Multi-Spindle Turned Parts For the production of multi-spindle turned parts, we maintain a very high quality standard, which is linked to our certifications...

... simultaneously. During the leak test, fully assembled joints are subjected to various media (clear water, salt water, dirty water, etc.) and climates while simultaneously undergoing tilting and rotating movements with the respective testing parameters applied. During the wetting process, the spray nozzle can be moved relative to the joint. Additionally, it is possible to control the temperature in the range of -30°C to +80°C and the humidity from 10% to 90%. The desired climates are realized in the usable space with easy handling and reliable control, achieving high accuracy and reproducibility.

...Professional Cone Grease Nipple "Series H" for screwing in according to DIN 71412. Features Form A = Head 180° Reliability and precision for original equipment manufacturers and the spare parts market High corrosion resistance (72-hour salt spray test) RoHS compliance (trivalent chromium) Internal pressure resistance min. 400 bar Made from precision automatic steel, hardened, galvanized, and passivated...

... wheel is suitable for industrial heavy-duty applications. Steering Housing Yellow galvanized steel sheet (over 72h test in salt spray chamber). The double ball bearing and the direct contact between the plate and the ball bearing holder with integrated bolt ensure excellent maneuverability. Requires no maintenance. The housing is designed for a load capacity of up to 7500N. Due to the high load...

...This test is used to examine reclaimed water (after use) to determine the effectiveness of salt removal and is ideal for checking wash and spray water for salt contamination. A high chloride content in the wash water promotes premature corrosion and shortens the lifespan of steel and concrete. This test is also applicable when mixing concrete. Measurement range: 10 - 2000 µm/qcm Resolution: 10 µm/qcm...

... Motor Voltage: 24V DC (stepper motor) Max Load: 5500 N Max Static Load: 10000N Max Overturning Moment: TK more than 5N.M Axial Rigidity: 2000N Standard Stroke: From 100mm to 1000mm Speed Range: 1.2mm/s Transmission Precision: less than 0.35mm Reset Precision: less than 0.2mm Transmission Efficiency: More than 60% (ball screw type) Corrosion Protection: Salt spray test more than 480 hours Protection Class: IP65 Mechanical Life: More than 20 years Sensor Type: Hall Sensor...

...Glossy chrome-plated plastic lock with stainless steel screw and clip for quick fastening. 90° rotation left/right. Dust and splash protection according to IP65 standards. Certified with 240h salt spray test. Can be mounted on sheet metal with a thickness of 1 to 2 mm. Pre-assembled levers in nylon or galvanized steel. Packaging: cardboard box of 100 pcs.

...Hardness Testing | Metallographic Investigations | Salt Spray Test Hardness Testing: • Rockwell HRC, HRA, HRB • Vickers HV0.005 to HV100 • Brinell Metallographic Investigations: • Sample preparation • Hardness profiles • Microscopic structure assessment • Documentation and reporting Salt Spray Test: With the commissioning of a test chamber for salt spray testing according to (ISO 9227:2006), we offer you a testing procedure to determine the corrosion resistance of your components.

... thickness of the passivation layer is approximately 300–500 nm, comparable to the layer thickness of conventional yellow chromating. Application occurs at higher temperatures (around 65 °C) with high concentration. For economical operation, a sparging rinse in cascade technology is required. The color appears bluish-green iridescent. The corrosion protection in the salt spray test ideally exceeds 144 hours without initial attack for bulk goods and over 240 hours for rack goods.

... all kinds and is very easy to clean. Additionally, the coating is UV-resistant, withstands the salt spray test, and is therefore well-suited for both outdoor and indoor applications. The coating also possesses appropriate forming properties, ensuring that no damage occurs during bending, punching, and forming operations. Coating is possible for sheet sizes up to 6000 x 2000 mm and sheet thicknesses up to 2mm.