relative sensor

...The SRF 24, based on a capacitive polymer sensor, is designed as a screw-in probe, with the sensor element in direct contact with the measuring gas for optimal response behavior. A built-in special glass feedthrough ensures pressure resistance up to 150 bar. A fine-pored, moisture-permeable stainless steel sinter filter effectively protects the sensor element from contamination and mechanical...

...The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. The ceramic sensors are based on the approved thick-film technology and accurate for high-precision measurement. Name:Ceramic relative pressure sensor pressure measuring variant:relative pressure Pressure measuring range:0...10 bar Burst pressure:25 bar Application temperature:-40...+105 °C Operating voltage:5...30 VDC Bridge resistor:10 ±20% kΩ Connection:Flat cable, RM 1.27 x 40 mm length Dimensions:Ø18 x 6.35 mm Environmental data:RoHS 2002/95/EG compliant Weight:0.0174 kg...

...The 1620 is a calibrated relative pressure sensor designed for the clinically relevant pressure range of -50 to 300 mmHg. A biocompatible gel protects the pressure measuring cell from the medium being measured. For hygienic reasons, the sensor is designed as an easily replaceable disposable product. As such, it can be replaced with less than 1% deviation compared to a new 1620. With a usage...

...The capacitive level sensor NR 160 is designed to monitor liquids and powders with high relative dielectric constant εr 35 … 85. The functions for MIN or MAX monitoring as well as other properties (output signal LSS or HSS, response delay etc.) are factory pre-set. The switch point is adjustable by means of a teach-in momentary switch.

...High-precision pressure sensors of the 8201 series provide accurate measurements with a high degree of insensitivity to mechanical stress. They are excellently suited for industrial applications in quality assurance or for measurement and control tasks in production. The robust mechanical and electrical design ensures good long-term stability and high reliability. The sensor is designed to...

...WiPr-es is a patented, self-powered, wireless pressure sensor for industrial applications. Eliminate the need for batteries, wiring, and tedious maintenance while enjoying accurate, real-time monitoring in power plants, chemical facilities, refineries, and more. Discover the unmatched reliability and efficiency of WiPr-es, revolutionizing the way we measure pressure. ...

... monitoring of emissions (for up to 32 sensors) • full colour, icondriven menu and display • two independent alarm set points • relative dust reading on clear scale 0100% • dust 'overrange' icon • security setting • digital signal processing • field upgradeable...

...Pressure sensor - VD61 / relative pressure / max. 600 bar / 4...20 mA / DNV-GL - Pressure sensor for relative pressure measurement Robust housing for the use in harsh environments Suitable for relative pressure measurement Suitable for pressure measurement up to 600 bar Simple assembly Certified for shipbuilding and offshore industry by DNV-GL Material:Stainless steel, Housing: Aluminium...

... control panel display and the intuitive menu inform the user about all service settings such as water fill level, fan speed, and the relative humidity of the ambient air. The self-diagnostic system indicates necessary filter replacements and malfunctions through error codes. Measurement via radio sensor up to a distance of 30 m Applications: air Type: unspecified Mobility: unspecified Other features: compact...

... controlled via a mobile app. Moreover, the app allows the pairing of devices by assigning two or more heat recovery units to a group. It is possible to have many groups so that 1 application can serve all HRV units in a building. A temperature sensor and relative humidity sensor are built into the HRUWALLWI, and the app displays their values. ...

... only possible to take full advantage of the linearity or conformity of any rotationary sensor system, if coupling alignment errors (offset and angular misalignment) are avoided or at least reduced to a mimimum. This means that with highly accurate measurement systems, due allowance must be made for any coupling misalingment in accordance with the above equation.

...colorSENSOR OT sensors are fixed lens sensors with True Color detection. The sensor is equipped with a special illumination and optical system in order to perfom relative color measurements reliably even from a large distance. Apart from the optics, the models hardly differ from each other. The illumination can be disabled by software. OT sensors are also suitable for the color detection of self-luminous sources.

...Relative Pressure Transmitter / Capacitive / Thin Film / Ceramic / Max. 150°C - Pressure Transmitter for Service Pressure and Level Measurement The OPTIBAR PC 5060 C pressure sensor features a capacitive ceramic measuring cell that particularly demonstrates its robustness and longevity in numerous applications. The OPTIBAR PC 5060 C pressure transmitter measures gases, liquids, and vapors. The...

... advantages of the motor include efficiency, compactness, and quiet operation. Furthermore, the motor features an integrated magnetic encoder (2-channel Hall sensor) suitable for positioning. Size: Flange dimension 42 mm Protection class: IP20 Torque: 0.75 Nm to 3.00 Nm Speed: up to 350 rpm Motor connection: Wires with Molex connector...

...HYT271 MK33 in a robust and compact screw housing made of stainless steel with a metric M14 thread. Ideal for test measurements in an industrial environment. Operates from -40 °C to +120 °C and maintains 0 to 100% relative humidity (water activity aw). Digital I2C interface via 0.5 m cable. Compatible with the HYT test board (USB or 0 to 10 V analog outputs). This functional prototype is designed for easy evaluation of oil sample compatibility. Please contact us for support with your tests and to discuss the design of an OEM sensor probe tailored to your application.

...Digital pressure transmitter sensor with welded metallic measuring cell for gases, steam, or liquids The Cerabar PMP51 digital pressure transmitter sensor with metallic diaphragm is typically used in process and hygienic industries to measure pressure, level, volume, or mass in liquids or gases. The PMP51 transmitter sensor is designed for high-pressure applications up to 400 bar. The Quick Setup...

...—Programmable pressure sensors 0…16 bar with digital display —For smart pressure control in processes —Pressure sensor for pressures from 0…16 bar relative —With analog output and up to two switching outputs —Programmable functions such as damping of pressure spikes, quick adjustment of two switching outputs, limits, hysteresis...

... to +1,150 °C (NiCr-Ni) GTH 2448/2:-200 to + 650 °C (Pt100, 2-conductor) GTH 2448/3:-60.0 to +199.9 °C (Pt100, 2-conductor) GTH 2448/4:-200 to + 650 °C (Pt1000, 2-conductor) GTH 2448/5:-60.0 to +199.9 °C (Pt1000, 2-conductor) Display:3½-digit, red, 10 mm high LED display. Sampling frequency:approx. 3 measurements / sec Operating temperature:0 to 50 °C (permissible ambient temperature) Relative...

...PR601 and PR611 Monolithic sensor machined from solid steel. Membrane equipped with a bridge of semiconductor piezoelectric gauges. Version particularly suited for EOM applications with all fluids. PR661 and PR671 Piezoelectric sensor with a bonded membrane (silicon capsule). These can be supplied in relative or absolute versions. Version particularly suited for EOM applications with mildly aggressive fluids.

... connection is achieved through a standard ANSI flange by default. Pressure mode: relative Measurement range: 0-60 mbar to 200 bars Accuracy: ±0.1% (up to ±0.075%) ±0.25% ±0.5% Temperature: Ambient: -40 to 85°C Storage: -40 to 90°C Process: -25 to 85°C Power supply: 12 to 45V DC (24 V DC is recommended) Output: 4-20mA / HART Display: LED with multiple parameters ATEX: Exia II CT6 Exd II CT4 Materials: Housing: low copper content aluminum cast, epoxy powder coating Sensor: Stainless steel 316 Protection: IP67...

... drives the Motor Under Test (MUT) at a low speed of 1 to 10 min⁻¹ (respectively 8 min⁻¹ for CTS 103-104) while capturing its no-load torque relative to the angular position. The torque measurement covers a range up to 1 N·m (depending on the selected torque shaft) with an accuracy of ± 0.1 mN∙m (for TS 100 – 50 mN∙m and TS 101 – 100 mN∙m). An executable software controls the system and performs...

... Temperature Direct Setting and Control of Chamber Temperature Direct Setting and Control of Relative Humidity Display of Diagnostic Messages Storage for 10 user-defined test methods Pre-programmed international standard test methods Multilingual User Interface Non-aging XENOCHROME filters to simulate outdoor daylight, daylight behind window glass On-rack XENOSENSIV 300-400 nm for measuring and...

... (11 ± 1) x 106/K (spring steel) Temperature range Ambient temperature 20–70°C Storage temperature 40–70°C Assembly Installation using the preaffixed doublesided adhesive tape must be carried out according to the enclosed user information. On request Other lengths from 0.1–100 m, in increments of 0.1 m. Note Relative humidity 100%. Dewing is permissible. Drawing reference 1) Cover band A = 0.176 mm 2) Magnetic tape M = 1.0 mm 3) Carrier band T = 0.3 mm 4) Adhesive tape K = 0.1 mm 5) Required tape length = measuring path + L + 2 x B 6) Measuring path Reference:21725...

...Torr Adjustment range:1×10 -3 … 500 Hysteresis:≥10% of measurement value Relay contact:floating changeover contact Contact rating:50 Connector:D‑Sub, 9‑pole, male Analog output:0 … 10.3, sensor output signal Supply:100 … 240 Frequency:50 … 60 Consumption:≤30 Operation (ambiance):+5 … +50 Storage:–20 … 60 Relative humidity:≤80% up to +31 °C, decreasing to 50% at +40 °C Degree of protection:IP20 Weight:0.85...

... the automatic measurement, recording, storage, and assessment of the measurement values, the sensor can be classified as semi-intelligent. The improved version of the Feuchtesensor provides engineers and users with the ability not only to determine the water concentration in lubricating and hydraulic oils in real-time but also to calculate the oil condition and the remaining lifespan of the engine oil. The use of the Feuchtesensor Plus is particularly necessary concerning unsaturated ester oils.

... measurements are available. In addition to CE and UL certificates, every M01 product with a 1.4542 stainless steel measurement cell possesses an E1 approval verifying its suitability for use in vehicles. Pressure ranges:0...10 - 0...2000 bar (relative) Maximum media temperature:150 °C Protection:IP69K Electrical connection:M12 (PTB / stainless steel), DT04-4p. Electrical connection:DT04-3p., AMPSS Pressure connection:G ¼“, ¼“ NPT, SAE04, SAE06 CAN protocol:CANopen, J1939 Analog output:current 2W/3W, voltage, ratiom.

... well as in residential areas, offices, hotels, technical rooms, and conference venues. Our room humidity sensors are equipped with a dual DIP switch, allowing for the output of not only relative humidity but also absolute humidity and dew point. These humidity transmitters are intended for precise measurement of temperature and humidity, utilizing a digital, long-term stable sensor as the measuring element. We are also happy to provide advice over the phone regarding suitable applications; you can reach our service hotline at +49771/897508-0.

...This modular body design provides maximum flexibility to mount in tight spaces, allows for customized wiring and optical paths, and minimizes the need to design new mechanical fixtures. Color:Color Resolution:640 x 480 (standard)640 x 480 (2X magnification)800 x 600 (2X magnification) 1280 x 960 Relative Processing Speed:2X Tools:Pattern, Pixel Count, Contrast, Brightness, Edge, Circle Find...

...Compact rugged wind sensor with a maximum measuring range of 60m/s. - Analog and digital output for wind speed and wind direction - Optional measurements: relative humidity, temperature, pressure, solar radiation - Wind gust (SDI12 and Modbus) - SDI12/RS422/RS485/Modbus output for all parameters (define at ordering) The MultiMet is a rugged compact wind sensor that can be supplied in many...

... gravitational acceleration (g), changes in capacitance occur, which are measured and processed further. The output voltage follows the function U ~ g * sin(α). Here, the angle α is the tilt angle of the sensor measured relative to the g-vector. These sensors provide precise measurements, have a long lifespan, and are very robust. The measurement axes operate independently of each other. In the inclination...