weld materials

...The machines and automation systems designed and developed by MTV GmbH in the field of ultrasonic technology range from customized standard machines to complete production lines. When welding thermoplastic materials using ultrasonic energy, an inseparable connection is created between two or more parts. Each connection to be made requires a weld seam design that considers the material, geometry, and positioning of the components to be joined. Therefore, the better the design of the weld connection, the more reproducible and lower risk the implementation of the connection in the welding systems.

...We produce such tanks according to the wishes of the client. They are made of plates, which we weld to measure. They are intended for installation into fire fighting vehicles, various work vehicles, boats, and numerous other places. Characteristics: we use materials PE80, PE100, PP, PPC and PPH, you can choose from wall thicknesses of 8 – 30mm, if so desired, we make tanks with compartment walls and attachments to measure, our competitive advantage is a quick response time. ...

...Pot filters available in the following designs: – Flange – Weld ends Housing materials • Steel • Stainless steel • Special materials Screens • Perforated sheet metal • Stainless steel wire mesh • Special mesh sizes Nominal sizes • DN 50-600 Pressure ratings • PN10-PN40 • ANSI Special designs available upon request...

...We cut round tubes on two different orbital saws with the highest precision and very high cutting speed. We weld almost all processes and nearly all weldable metallic materials with the best quality! We have proven to our regular customers that we place the utmost importance on high quality and proper execution of our work. With the orbital technology in our facility, we can, through constant welding samples and tests, realize a variety of different diameters, butt and fillet welds according to impeccable optical and technical criteria.

...Quick and easy welding even of thin materials - Weni Solution laser welders primarily enable the simple creation of professional and aesthetically pleasing joints. Cleaning of welds - this function involves removing contaminants and excess material from the weld area, allowing for optimal weld quality. Metal cutting (fiber laser cutting function) - appropriately adjusted parameters modify the...

...HDL Plastic Technology manufactures precision milled parts from all common plastic materials • Special parts • Signs (including luminous edges with Lisa plastics) • Small series • Large series Additionally, as a certified specialist company according to WHG §19, we can also • deform • bend • weld the milled precision parts...

... while installed. This helps to avoid long machine downtimes and reduces labor costs associated with complex disassembly. Applications of this non-destructive testing method include weld seam inspection (pulse-echo method) as well as wall thickness measurement of components, which can also be performed on-site under construction conditions.

...Your strong partner. Precision. Care. Quality. This is what we have stood for for many years. Our tested, dedicated, and experienced team processes all common materials, including aluminum, steel, and stainless steel. STRONG WELD SEAMS / MULTIPLE WELD SEAMS YEARS OF EXPERIENCE WITH ALUMINUM RATIONAL MANUFACTURING THROUGH ROBOTIC APPLICATION CERTIFICATION ACCORDING TO EN ISO 1090 FOR STEEL AND ALUMINUM...

... wire is fed into the weld pool via the control system. This allows us to achieve a defined root and cap height even with thicker workpieces. The welding process takes place in an open chamber. Therefore, it is essential that the weld seams discolor and may require post-processing (pickling, polishing). Manual welding We offer you the most common manual welding processes in almost all standard materials, including TIG, MIG, and MAG, performed by our certified welders.

...The CMA pickling pastes TS effortlessly remove discoloration and heat tint in weld seams and heat-affected zones. They also eliminate foreign rust and foreign ferrite on stainless steel materials. The CMA pickling pastes TS are free from hydrochloric acid and chlorides. Package size: 6x2 KG Application area: Pickling of stainless steel...

...Exhaust Compensator with Weld Ends Meko AE41k Construction: Single-layer multi-wave design, with weld ends on both sides. Optional: Multi-layer bellows. Materials: Body made of 1.4541, weld ends made of 1.4541. Weld Ends: According to ISO pipe standard. Pressure Stages: PN 16 (BD 16 bar, BT 20°C). Nominal Diameter and Lengths: Nominal diameter DN 15-DN 250...

... measures. This way, you can prevent damages and financial losses in the future! Our corrective measures cover all areas: design, manufacturing, materials engineering, and operating conditions. Type of damage: Damage to weld seams...

...Three-piece nozzles: body, tip, and cap. Filters are also available for smaller flow rates to prevent clogging issues. A 5° jet offset from the orifice allows for overlapping jets without interference. Connections from 1/8" to 1/2", male or female, BSPT, NPT, or other upon request. Weld connections are also available. Standard materials include brass, mild steel, stainless steel 303, stainless...

...All types of nuts, here are a few examples listed. Available in various materials and finishes. Special and custom parts; Product group: Hexagon weld nut DIN: M6-M12...

... 1090 EXC 3, and ISO 3834-2, we ensure quality with experienced, certified personnel and standard quality assurance measures. We primarily process carbon steels and austenitic chromium-nickel steels, but also special materials. An overview of the materials we can weld can be found here.

...Laserage can precisely cut, drill, weld, scribe, and heat treat a wide variety of materials to meet any and all specification.

... to weld materials like Ampco. For repairs, the weld seams can be post-processed through milling, grinding, and eroding. We carry out repairs, modifications, spot and seam welding, and finishing for you. These tasks can also be performed on-site at your facility with our mobile laser.

...take on the desired part of the construction work, and optimize the manufacturability. The advantage for you: Time and cost savings in all process steps. Irreversible connections of components are a highly complex process that places high demands on craftsmanship and must ensure the traceability of the materials used, welding filler materials, technical gases, as well as the quality of the weld seams.

...TAWERS Super Active Wire Process (S-AWP) The Super Active System is based on a highly dynamic wire drive. TAWERS Super Active Wire Process (S-AWP) By utilizing active wire feeding throughout the entire short arc range, it is now possible to minimize welding spatter and material distortion. This results in flawless weld seam execution, especially with thin materials. This effect is achieved...

... expansion joints in precast walls in industrial buildings and warehouses. - Sealing of expansion joints on cement floors with low pedestrian traffic. - Creating an elastic joint, especially outdoors, e.g., stairs, underpasses, exposed to weather conditions, pollutants, and fats. - Securing weld seams on steel structures or sheets. - Paintable after partial curing. [PROPERTIES:] - Movement capability of 25%. - Creating a strong and flexible joint that is resistant to weathering and aging.

...Commission us for your contract manufacturing. We deliver welded parts with the highest standards of precision and quality. When it comes to joining what belongs together, the portfolio of feinwerk is impressive: We weld manually or with a robot. Materials: Stainless steel, steel, and aluminum • Flexible batch sizes (even "1" is possible) • Large constructions as well • Spot welding up to 5 mm • Surface finishing...

...Extract systems to serve educational style fume cupboards will meet standards set out in Building Bulletin 88 or B.S. E.N. 14175. At the fume cupboard company, we try and hot air weld as much of the ductwork as possible this prevents leakage and sustains the integrity of the joints for the duration of its life. We provide a variety of different duct materials these consist of: Chemically resistant P.V.C | Polypropylene | Galvanized Metal. For extra protection we can also make glass reinforced plastic (GRP) and fire retardant coating for this duct work.

...Aluminum is a light, thin metal that is very commonly used in welding shops. With this metal, welding must be done at low temperatures, otherwise pores will form in your materials. Aluminum is highly reactive, so it forms an oxide layer when exposed to air. This oxide is a barrier to welding. Before welding you need to remove the oxide layer using a wire brush. Each different type of weld requires different equipment and techniques, but when you apply everything involved, your aluminum welds look clean and smooth and are very durable.

...-fit zones such as EloPin® puzzled at any feed or distance). The background to this is that no additional material is generally used in laser welding. Exception for build-up welding or repair welding of e.g. broken tool parts such as punches or cutting plates or injection molding tools for abrasive plastics with glass fiber filling. Materials - almost all metals: e.g. • non-ferrous metals (Cu, CuSn0.15, CuSn6, CuNiSi, ...), • titanium, • steel, stainless steel (1.4301, 1.4404, ...), • spring steel (1.4310), • electrical steel (M235, M270, NO20, NO30, ...), …...

.../sides 3/3 or 4/3 mm; - Upper edge square tube 80x40x3 mm; - Bottom frame U 60x40x3; - Side frame U 60x40x3; - Frame spacing 750 mm; - Bottom/sides 45° or 90°; - Double-wing door or swing flap with safety lock on the side; - Continuous weld seams, except for bottom reinforcements; - Tarpaulin hooks, lubricatable hinges; - RAL color shade according to request /80-100 μm; - Permissible total weight depending on length 3.5 t, 7.5 t, or 12 t.

...In our facility, we offer welding and locksmith services for various series or custom productions. Our workshop for welding and locksmith services is currently equipped with a gantry crane with a load capacity of 1500 kg. Our qualified welders handle not only series production but also individual fabrications. For this purpose, we have 6 MIG welding machines and 4 TIG welding machines available. We weld, among other materials, steel, stainless steel, and sheets with various material thicknesses in our workshop.

... can be produced in various outer diameters; it is also possible to manufacture the filters in a dome shape. The number and position of the weld points, as well as the number of layers, are determined by the customer and manufactured by us according to customer specifications. The tools for production are made by our toolmaking department.

...Radiographic testing is particularly suitable for detecting volumetric defects, such as pores and slag inclusions. X-ray tubes up to 200 kV and selenium emitters up to 120 Ci are used as radiation sources. With this technique, under an appropriate angle of incidence, even the finest cracks in metallic materials such as steel, cast aluminum, and in materials like plastic or ceramics can be detected in weld seams.

... Our experienced employees weld the following alloys: - Steel alloys - Aluminum alloys - Chrome-nickel steels - Brass We also have a spot welding system available in the sheet metal processing area. Additionally, we offer a mobile welding and repair service.

...For over 20 years, we have been producing friction-welded bolts with various geometries, strength classes, and surface treatments from the following materials: Construction steels, e.g., C10C Quenchable steels such as 20MnB4 Stainless steels, e.g., 1.4301 Non-ferrous metals...