reinforced plastic materials

... to other materials (e.g., glass fibre reinforced plastic), the system is more temperature-resistant, allows castings without air bubbles and does not have to be post-cured. Furthermore, the finished mould is easy machinable (e.g., drilling, milling, grinding, planning, sawing, turning, etc.). ALWA MOULD D moulds can be modified with repair filler, so that a fresh view can be created at an early stage of a new design process and prototypes can be examined at short notice.

...Directly Driven Stirrer, Quick Mixer FM APPLICATION AREA - For stirring and mixing processes up to medium viscosity ranges - Adaptation to changing operating conditions possible through interchangeability of various stirring elements MATERIAL - 1.4571, also polished to Ra 0.4 µm - Plastic (PP, PVDF, PTFE) - Steel / Hard rubberized - Titanium - Other special materials available upon request...

...The GORE Universal Pipe Seal (Style 800) provides a reliable seal for flanges made of steel, steel enamel, and fiberglass-reinforced plastic (FRP) across a wide range of highly acidic, basic, and solvent-containing process media, including the most demanding applications with fluctuating and elevated temperatures. Thanks to this universally applicable seal, production downtimes caused by the use of incorrect sealing materials can be avoided, thereby enhancing process safety. The extremely adaptable 100% ePTFE also reliably seals irregular surfaces.

...Anti-theft business backpack made from nature line and durable 600D RPET melange effect, crafted from recycled plastic to promote the reuse of plastic waste and contribute to the planet's sustainability. Features in black and reinforced base. Includes an anti-theft pocket for storing valuables. External pocket with zipper, with two padded internal compartments for a laptop of up to 15 inches and...

...CF/PEEK components, made from a combination of carbon fiber and polyether ether ketone, offer unparalleled wear-resistance and durability. These advanced composite materials are designed for demanding applications where high performance and longevity are essential. With excellent mechanical properties, thermal stability, and resistance to chemicals, CF/PEEK components are ideal for industries such as aerospace, automotive, and manufacturing.

...ARC I BX1 is a polyurethane-modified epoxy composite material, reinforced with ceramic beads and flakes for protection against severe sliding abrasion and impact wear. High ceramic particle content Applied with a trowel or plastic applicator Applied at a thickness of 6 mm (1/4") or more Available sizes: 20 kg, 12 x 20 kg...

...Market and festival distribution cabinets are made of a fiberglass-reinforced plastic housing with a labyrinth ventilation system in protection class IP 44, color light gray. The side panels, back wall, and roof are individually replaceable, and the door is equipped with a security lock. Installations up to and including RCDs are protection-insulated. Special designs available upon request.

...Jokey Technics processes all common thermoplastics. In addition to high-quality standard thermoplastics, such as polypropylene, polystyrene, or polyethylene, we use common technical thermoplastics like acrylonitrile-butadiene-styrene (ABS), polyamides, or polycarbonate. Depending on the application and specifications, reinforced virgin materials, unreinforced virgin materials, or secondary raw materials are utilized.

...Ideal retention shelter for the outdoor storage of 4 drums. This retention basin is lockable to prevent unauthorized access to its contents. Built with a very robust construction, it features a double wall with a sliding curtain and reinforced ribs assembled with stainless steel screws. The storage shelter is accessible from both sides (one side at a time) and can be transported (when empty) by...

...Work system features: - 3D printing prototypes in all types of plastic materials. - Stereolithography by powder deposition. - Machined automotive parts. - Laser cutting of plastic parts. - Industrialization of molds. - Mold manufacturing. - Injection of ABS, PET, and fiber-reinforced polyamide plastic parts.

...Manufacturing is carried out according to customer drawings and specifications. The available base materials include: steel, aluminum, brass, stainless steel in various grades, and fiber-reinforced plastics. A wide range of material combinations is possible. Max. pressing size Ø 1,000mm and 2,300 × 1,300mm.

...Plastic Machining The company Joseph Martin specializes in the manufacturing and machining of plastic parts. It has expertise in machining materials such as PEEK, Teflon, PVDF, POM, etc. The machining of plastic parts is carried out on a modern and efficient CNC machine park. Types of Machined Plastic Materials: The different types of plastic materials machined by Joseph Martin are as follows: - PEEK (Polyetheretherketone): Natural PEEK, carbon fiber reinforced, graphite, and Teflon - Teflon (PTFE) - PVDF (Polyvinylidene fluoride) - POM (Polyoxymethylene): Pom C and Pom H - Ertalon (PA)...

... fiber-reinforced plastics are used in various industries and can be used to manufacture both small components and large structures Offer STOLAM, a company with 40 years of experience, specializes in the production of high-quality plastic components using hand lay-up processes. Our team consists of skilled professionals who can tackle even the most challenging manufacturing demands. By partnering with us, customers can rely on professional advice and technical support at every phase of their projects. We offer a range of products to our customers, including body parts and interior...

...The containers designed for transport and storage offered are made of fiberglass reinforced polyester (PFV) or polyethylene (PE). These materials are particularly suitable for the storage and transport of liquids and meet all required safety standards. Fiberglass reinforced polyester (PFV) is especially resistant to corrosion, making it suitable for the storage of hazardous substances. Polyethylene is also resistant to acids, oils, water, and detergents, which makes its use flexible.

...Type 402 is a pre-applied polymer composite material on a bandage. It is a completely innovative repair system, ideal as an emergency repair for cracked or leaking pipes – and can be used on almost all materials: metal, plastic, wood, glass, fiberglass-reinforced polyester, and more. After opening the packaging, the bandage is placed on the damaged area and cured through exposure to water. After 30 minutes, the repaired area is fully load-bearing.

...A solid hygiene item that allows you to open doors and press buttons without any contact. Made from reinforced materials for maximum durability. This product features Biomaster antimicrobial technology that protects against the growth of harmful microorganisms throughout the product's lifespan. Supplied with a roller clip for easier use. 98% ABS plastic and 2% antibacterial.

... (PE-UHMW), and if needed, in a tempered and thus very low-stress variant or with food approval certification. In addition to their use in machine and plant engineering as well as in the packaging and conveyor industry, ISO-LEN® 1000 is also utilized in electroplating due to its good chemical resistance. Rings and sleeves can be excellently produced from polyethylene. Depending on the application, the material can also be manufactured in a particularly temperature-resistant form as ISO-LEN® HOT or as a glass-fiber reinforced variant.

...Component optimization is possible, for example, in the areas of wall thickness ratios or rib/cap wall ratios. Additionally, filling aids or corner thinning can be used. A calculated negative correction may be applied, or for glass-fiber reinforced components, a measurement determination may take place. This way, the best possible result for the article geometry is achieved. Furthermore, after...

...Our security doors are designed to provide utmost protection and peace of mind for your home or business. These doors are specifically engineered with enhanced security features to prevent unauthorized access and deter potential intruders. Built with robust materials, our security doors offer exceptional strength and durability. They are constructed using reinforced steel or other high-grade...

... handles, grab handles, carrying handles, or hood handles. In the production of handle grips, KIPP relies on different materials to meet a wide range of requirements. From round steel with a plastic coating for better handling to lightweight aluminum and glass-fiber reinforced polyamide, as well as material combinations. Special anodizing processes and coatings provide enhanced surface protection – ensuring that KIPP handles are also safe from corrosion and thus particularly durable.

... expansion. Very good sliding properties. TECADUR PET black Good UV resistance. Good machinability. TECADUR PBT GF 30 Glass fiber reinforced polyester with very high strength. High heat resistance. Low thermal expansion. TECAPET Very good machinability. Very creep and abrasion resistant. TECAPET black Good UV resistance. Very good machinability. TECAPET TF High abrasion resistance. Excellent sliding-friction properties.

...In reinforced concrete structures, it is essential to leave joints at certain points. To prevent deformation that may damage the structure due to volume reduction when the cement completes its setting, expansion joints must be incorporated. The joints arranged perpendicular to compressive stresses, where the concrete is constructed in sections, are known as construction joints. Joints arranged in...

The emtechnik group, with its 160 employees, is today one of the world's leading manufacturers of high-quality miniature fittings and screw connections made from special plastics, with the aim of consistently developing products from the perspective of their customers. The company was founded in 1965 in Ludwigshafen and is now successfully managed in the second generation by Michael Meier from the...

...Wide range of handwheels for clamping and maneuvering. Diameters from 35 to 560 mm. Available in plastic materials (bakelite or reinforced polyamide), polished or unpolished aluminum, cast iron, and also A4 stainless steel for the most severe conditions. Various shapes are available, as well as rotating handles for quicker maneuvering. The standard range is produced according to DIN standards 7708 and 950.

... regarding sound insulation and noise protection according to directive CE 2000/14/EG and are marked with the guaranteed acoustic level CE. The containers are fully recyclable at the end of their life. Reinforced with aluminum dowel reinforcements. Reference: D01E06 Materials: Plastic Volume (L): 1000 Width (mm): 1370 Depth (mm): 1118 Height (mm): 1295 Weight (kg): 55...

...Black waste bags made from reinforced low-density polyethylene (LDPE). These trash bags are ideal for collecting everyday items such as household or office waste. These standard-use recycled trash bags help protect the environment. Made from 100% post-consumer recycled plastic (agricultural tarps, plastic waste), these 70-micron thick trash bags are perfect for regular household waste as well as...

...We offer custom production of stackable boxes and containers made from plastic materials. Containers with reinforced corners, both open and closed. Wide range of dimensions and configurations, colors, materials, and accessories. Contact us, NgPlast.

...Impeccable quality, airtight opening and closing thanks to the patented pressure zip. Ultra-fast. Super durable, made from 60 Micron low-density polyethylene with reinforced seams. Very easy to open and extremely secure closure. Ideal for grouping, presenting, and protecting your products. Food-grade quality. Equipped with a hanging hole of Ø 8 mm.

...Recommendation: Protection of floors, walls, packaging & Decoration PLASTIC ARME M1 is a flexible, flame-retardant PVC film reinforced with a polyester mesh. Thickness: 300 microns - Surface weight: 300 g/m² Rolls: width 140 cm - Length: 50 ml Appearance: Translucent azure with mesh (sandy texture) 70m² / roll The reinforcement of a mesh allows for better support of the film, limits deformation...