nominal sensors

... with the medium >>> No pressure loss with the medium No wear on the sensor >>> No maintenance required No modification of the pipe >>> Easy installation Type: UDS 04 Outer diameter of the pipe: 4 mm Installable range: 3.5 – 4.5 mm Nominal flow range: 0 – 100 ml/min Output: PNP or NPN circuit Network compatibility: IO-Link Zero cut-off flow rate: 20 ml/min Tmax: 60 °C External input: Selectable: Zeroing the flow rate/Detection input for shot mode/Resetting the flow amount/Zero point shift...

... operation - Update rate of 8.3 microseconds (120KHz) - Low electronic noise. The low-noise design allows for stage position noise of only a few tens of picometers. - High nominal power, -30 to +150 V drive with 160 mA continuous current as standard.

...The DXN-E is a portable ultrasonic flow meter. The DXN-E is used as a mobile ultrasonic heat or cooling power measuring device for heating, cooling, or solar systems. The DXN-E is a portable ultrasonic flow meter based on the time difference principle. With the two additional PT-1000 temperature inputs, the DXN-E can be used for measuring heat/cooling power. The DXN-E is always supplied with sensors in a nominal diameter range of 12 mm to 600 mm (2 sets). The ultrasonic heat measurement is particularly well-suited for hydraulic balancing according to VOB. Nominal diameter: DN 15 to DN 3000...

... generates a line. The CMOS cameras extract the position of the laser line internally using a peak detection algorithm, resulting in a sub-pixel resolution that enables high acquisition speeds. Thanks to its unique concept, precise and reliable measurements are guaranteed for virtually any shape, regardless of torsion. Likewise, an advanced software toolbox is available for measurements such as angles, widths, thicknesses, radii, depths, distances, diameters or deviation from the nominal value. The profile shapes can be easily imported using existing DXF files.

...Lithium Battery (Lithium Thionyl Chloride) Main Applications: Smart Metering (gas, water, electricity, etc.) Monitoring / Tracking Alarms / Sensors Medical - Industrial Automation Main Features: project life: 10 years at controlled room temperature Low self-discharge batteries are produced in accordance with Reach and RoHS regulations, UN 3090/91 testing Tadiran SL800/2800 Main Features: Nominal voltage: 3.6 Volts Capacity from 0.55Ah to 9Ah Temperature range: from -55°C to +85°C Formats: 1/10C - 1/10D – 1/6D – 1/2AA – 2/3AA – AA – C -D...

... 99.98% of all harmful particles. UVC Destroys living organisms including coronaviruses. SterionizerTM Naturally cleans the air with ions. Indoor and outdoor sensors Measure pollutants and adjust performance. Dashboard / App Allow configuration and control of Aura Air. 30 Watts Nominal power consumption, gentle on the environment.

... through a compact design, and costs in maintenance and setup. Our brushless systems are available in the speed range of 30 to 4000 RPM (rated speed: 3000 RPM). Position detection is achieved through Hall sensors, which ensure a balanced control behavior. The constant torque characteristic of the Panasonic MINAS-BL series brushless motors, in contrast to asynchronous motors, provides a constant torque during startup and at low speeds. The speed deviation is a maximum of 0.5% at nominal...

...The IFQ LOGGER is a portable converter and logger for Flow-Tronic flow sensors. It disposes of one RS485 digital serial communication port with specific communication protocols for RAVEN-EYE or BELUGA flow sensors and one 4-20 mA input for external level. The IFQ LOGGER combines high performance with low power requirements. The unit needs 12 VDC nominal power supply either provided from an...

... be achieved. The connection to the local or district heating network can be freely chosen before manufacturing and can be made either on the right or left side. The DDC controller and all electrical field devices (actuators and sensors) are pre-wired and ready for connection. For cold applications, we manufacture the YADO|PRO transfer station with suitable fittings, double corrosion protection coating, and cold insulation. Manufacturing is carried out according to DIN regulations and the AGFW guidelines. Planning and manufacturing are ISO9001 certified.

Development, manufacturing, and distribution of custom pressure sensors, nominal pressures from 50 mbar to 700 bar, relative and absolute pressure, for automotive and industrial applications. Operating principles: piezoresistive silicon and silicon on steel membrane, ceramic resistive. Output signals are either analog or digital. ETO Sensoric is certified according to ISO TS16949, DIN EN ISO 14001, OHSAS 18001.