induction hardening

...Among the various methods of industrial electric heating, induction heating has experienced particularly rapid growth in recent years. We can perform hardening processes for you in both the high-frequency and medium-frequency ranges. Of course, all systems are equipped with modern CNC controls, ensuring a high level of uniformity and reproducibility of the heat treatment results.

...Case hardening, induction hardening, nitriding, salt bath quenching, annealing Our partner offers all types of heat treatments for raw parts and machined components Case hardening, plasma nitriding, nitrocarburizing, gas nitriding, induction hardening, vacuum hardening, low-pressure carburizing Stress-relief annealing, quenching in salt bath...

...Salvadori Venezia specializes in the repair and overhaul of all types of induction hardening transformers and medium frequency transformers, both of Italian and foreign production.

... layer, which is usually locally confined, is heated inductively with an inductor coil, bringing it to the necessary hardening temperature. By quenching with a spray directed at the component and using a special quenching medium, martensite formation in the surface layer is achieved. All steels with a sufficient carbon content (starting from about 0.3% C) are suitable for induction hardening. However, steels with lower carbon content can also be induction hardened.

...In induction hardening, or surface hardening, only a specific area of a component is hardened (partial hardening). In this process, the areas to be hardened are partially heated for a certain period using an inductor through induction current, and then cooled down in oil or in air.

...With our modern machinery and trained personnel, we also offer the possibility of partial hardening for your product. With our facilities for inductive heat treatment, we are capable of inductively hardening a wide variety of components and materials. The range spans from a length of 5mm to 950mm, with diameters from Ø3 to Ø400, and weights from a few grams to 40kg. Materials: Alloy steels, automatic steels, bearing steels, sintered materials, etc. Customer sectors: Automotive, agricultural and construction machinery, electromobility, mechanical engineering...

... are generally much smaller than with traditional furnace heat treatment. Reworking is either not necessary at all or only required to a very limited extent for the treated workpieces. Thus, this hardening process can provide significant time and cost advantages.

...Induction hardening machines...

Đuro Đaković Strojna obrada d.o.o. was founded in 2002. as a member of the Đuro Đaković Group. Activities of Đuro Đaković Strojna obrada d.o.o. are based on machining services while the Company is specialized in machined welded construction and production of different components, such as slewing rings and different components for mechanical transmission of power, such as reducers, gears and clutch...

... hardened, the component remains mechanically more flexible and can be easily reworked or straightened on the unhardened areas. To be even more flexible and customer-oriented in the market, we have a medium-frequency induction hardening system that allows us to harden lengths of up to 4500 mm.

High-efficiency high-frequency welding systems for longitudinally welded pipes: Our machines have power ratings from 60kW to 1200kW. They are suitable for pipe diameters from 8 to 398mm and wall thicknesses from 0.2 to 15mm. Heat treatment, inductive heating/annealing systems for pipes, packaging machines for pipes, arc spraying, flying cold saws, and other products for the metallurgical process c...

...This saves time and costs during production. Collaboration exists for gas nitriding and induction hardening of individual teeth with experts in the field. ZWP helps you modernize facilities and machines (retrofit / retrofitting).

...Cementing Pliers by WIHA Overlapping lever with hinge, high resistance High-efficiency blade with great cutting power and low force required due to high-precision processing Long-lasting thanks to additional induction hardening of the blades up to about 64 HRC Made of high-quality C 70 tool steel, tempered Compliant with DIN ISO 9242...

...Hipp Precision Technology offers you all common hardening processes such as: - Case hardening, - Vacuum hardening, - Gas nitriding, etc. HARDENING We offer a variety of hardening processes. Hipp Precision Technology provides you with all standard hardening methods such as: - Case hardening - Vacuum hardening - Gas nitriding - Induction hardening - Protective gas hardening - Surface hardening...

...Laser beam hardening, like flame and induction hardening, is classified as a surface hardening process. All steels that can be conventionally tempered can also be laser beam hardened.

...Induction Hardening: With one of the most modern induction hardening systems in Europe, workpieces with dimensions up to 2000x600x600 (hardening length 1500) and a weight of up to 600 kg can be inductively hardened and tempered.

...The optimized induction technology of eldec generators provides extremely efficient energy supply for all types of heating systems as well as induction hardening machines. They form the foundation of robust production lines. Device protection through the robust IGBT transistor technology: protection against short circuits and open circuits. Even accidental contact with the workpiece does not...

...Inductive heating is generated directly in the component with a very high power density. The area to be hardened is quickly brought to the hardening temperature and immediately thereafter quenched.

... workpieces are heated in the stressed zones to the desired hardening temperature and then quenched. The surface hardening of large workpieces requires extensive qualifications and a lot of experience. Both are ensured by the highly trained staff at HÄRTEREI REESE. Years of experience have led to process optimizations and component-specific solutions in both flame and induction hardening. By precisely defining machine parameters, a high degree of reproducibility can be achieved.

...A robot removes hollow shafts from a loading cart and feeds them into a washing machine. The special washing machine immerses the shafts in a cleaning solution, which is heated to an adjustable temperature, circulated, and filtered within the machine. After cleaning, the robot hands the shafts over to an induction hardening system and pallets them back into a loading cart after hardening.

Leverage the extensive expertise of Heidelberg Industry: As a technology partner, we support you across the entire spectrum of industrial production – from development and prototyping to series production, service, and spare parts supply. Our offerings grow with your requirements. Whether it's individual cast parts or the development of comprehensive electronic components and systems: With our ta...

... jaws according to ASA norms jaws direct mounting heavy duty 4 jaw independent chucks- Ø600-2000mm heavy duty steel body two piece jaws according to ASA norms jaws long master jaws for added rigidity direct mounting 3 and 4 jaw self centring VTL chucks- Ø700-1800mm specially designed for vertical lathes steel body central cover and long base jaws covering the spindle nose of the lathe induction hardening of all gliding areas 3 jaw oil country self centring chucks- Ø500-1000mm forged steel body extra heavy duty American Standard, hard top and master jaws...

... gas nitriding, Tenifer treatment, induction hardening, or tempering are carried out by specialized ISO 16949 certified partners. We perform corrosion protection coatings according to drawing specifications ourselves. Application Areas - Automotive - Drive Technology - Mechanical Engineering - Vehicle Construction - Agricultural Machinery Materials - Structural Steel / Case Hardening Steel / Nitriding Steel - Quenched and Tempered Steel - Other materials available upon request -...

... heating process followed by gradual cooling in controlled atmosphere. Thanks to this process the steel structure becomes more "refined" and improve its impact properties (perlitic structure). INDUCTION HARDENING The surface of the steel bar is heated by electric induction followed by fast cooling. This process leads to a high surface hardness but also to fragility and low impact values (Martensite surface structure). QUENCHING AND TEMPERING Quenching process followed by tempering. This process leads to a good hardness and resistance and it reduces its fragility in comparsion to induction...

...Stress-relief annealing of burn parts and welded assemblies including shot peening, case hardening, vacuum hardening, induction hardening, Tenifer hardening, plasma nitriding including oxidation...

...ROTOMETAL supplies all types of counter-cylinders made from high-quality tool steel. To achieve the highest precision, these cylinders are produced on state-of-the-art CNC machines. High precision ensures excellent clamping parameters, extends tool life, and reduces wear on other machine components and consumables. - At the customer's request, there is an option for induction hardening or through-hardening. - Guaranteed hardness level of 62 +/-2 HRC. - Possibility of producing variable diameters of the working surface.

...Brass: MS58 Materials Used: Automatic steels, brass: MS58, stainless steel, alloy steels, aluminum. Possible Finishes: Galvanizing, nickel plating, chrome plating, bluing, anodizing. Possible Heat Treatments: Hardening, induction hardening, case hardening, nitriding, annealing. We process diameters from 3 to 15 mm and lengths up to 120 mm.

... the following dimensions and designs: • Length: 150 mm to 1800 mm • Diameter: Ø 15 mm to Ø 80 mm • Profiles: W20 x 1.25 to W90 x 3.0 according to DIN, SAE, NF. Other standards as well as customer-specific standards available upon request. Processing: • Centering • Turning • Induction hardening • Profile rolling • Drilling • Milling • Grinding • Coating • Painting...

... bending process. – Hydraulic straighteners: * Designed and manufactured with the capability of movements in three directions. All movements are hydraulic. * Mounted in special graphite bronze plates * Made from solid steel and treated with induction hardening – Control panel: all machine movements can be controlled from the control panel Maximum section module: 210 cm3 Roller diameter: 460 mm Upper shaft diameter: 180 mm Lower shaft diameters: 160 mm Motor power: 15 KW Rotation speed: 0 – 7 m / min Length: 2400 mm Height: 1695 mm Width: 2000 mm Approximate weight: 9250 kg...

...We manufacture ball studs with various part geometries (such as hexagonal or recessed drives in the ball head) that can be used for riveting, welding, or alternatively for screwing. The production of this component group can be done through machining or even finished with segment tools on our multi-stage presses. Special processing methods such as induction hardening of the ball or thread locking can be implemented upon customer request.