housing plastic Germany

... for cylindrical or slightly conical metal and plastic containers ▪ Housing for machine safety and protection against dirt contamination ▪ Automatic retraction and venting the container as well as detection of media surface ▪ 4“-Touch panel with function keys for comfortable setting and parametrization of the system ▪ Externally controllable via Profinet interface ▪ Continuous determination of the position of the follower plate and level monitoring ▪ Adjustable pressure reduction for longer pauses...

...The plastic housing with a telescopic clamping plate is completely waterproof. The cable entry fitting is sealed with a two-component resin after installation. Telescopic Clamping Plate The telescopic clamping plate facilitates installation and measurements at the underground measuring point. The siphon-like loop of the cable in the measuring point housing allows for the telescoping of thicker...

THE ENTREPRENEURIAL PRINCIPLE Technologically always one step ahead, with an optimum of equipment and know-how, creative in thinking, flexible in action, efficient through lean structures. Since 1987, we have been developing and manufacturing sophisticated, high-quality sensors, measurement systems, and electronic controls according to this principle. We particularly focus on sustainability and en...

...The RS line is equipped with a threaded spindle. From size 75 mm on, all dovetail slides (type SS) are equipped with a digital position readout. Different installation options allow to read the display from different viewing directions. The housing consists of shockproof plastic. The digital display allows to make fast adjustments over the complete measuring path. Our slides that run on roller...

...)  Product status:Standard product  Field bus interfaces:EtherCAT / FSoE  Type of connection:female plug with PUSH IN spring connection  Status indication:LEDs allocated to the point of termination  Housing material:Aluminium frame, plastic housing  Dimensions (W x H x D):25 x 120 x 90 mm  IP-Protection Class:IP 20  Supply voltage:24 (-20% / +25%) VDC  Operating temperature:0 ... +55  Immunity:Zone B according to EN 61131-8  Certifications:CE, UL ...

... specially developed for effective dehumidification in spaces with high humidity and can also be optimally used in environments with hot tubs or spas, as well as in gyms. The standout feature of the DS 60 is its fiberglass-reinforced plastic housing, which is easy to clean and unaffected even by the air in particularly reactive environments. Mobility: fixed Fluid: air Other features: for pool, wall-mounted...

...Dymax GA201 forminplace (FIP)/cureinplace (CIP) gasketing resin is formulated for sealing plastic, glass and metal enclosures, and plated surfaces for automotive door handle, appliance housing, and critical electronic assembly and device applications which require a soft, tackfree, flexible gasket. Features: - Cures with UV/Visible light - Moisture resistant - Chemical resistant - Tackfree cure - Soft, durable after complete cure - Conforms to intricate channels and recesses - Compliant with RoHS directives 2015/863/EU...

... operations because of their wide beam, motion sensors, remarkable brightness, and illumination range. Let’s discuss the Ronix RH-4284 headlamp with 120LM of max flux and 3w power. Ronix RH-4284 is a high-quality, lightweight, and widely used headlamp with three different modes of high, low, and strobe lighting to cover a wide range of applications. Its housing is constructed from durable ABS plastic to ensure lightweight and convenient usage. Model:RH-4284 light type:COB LED Power:3W Battery Type:3*AAA Flux:120 lumen Brightness modes:100%-30%-Strobe-off Illumination Range:15M...

...-safe plastic housing (IP 20) the devices consist of a safety transformer according to EN 61558-2-6 as well as an electronic part with continuous short-circuit proof and over-temperature protected voltage regulators screw and snap-on mounting on DIN rail according to DIN EN 50022 connections to screw terminals according to VBG 4 with self-releasing terminal clamps printed performance data with circuit...

...- open hinge construction enhances hygiene - narrow reinforcements (25 mm) provide better support for products - fixed and sturdy edge construction with improved articulation axis locking - headless articulation axis facilitates (de)assembly - toothed wheels with large robust teeth, ensuring optimal force transmission and extended lifespan Accessories: - Toothed wheels in various sizes with round or square axle housing...

... gear wheel drylin® Q - gripper axis Move linear torque resistant, completely lubrication-free. The drylin® Q linear construction kit offers the user maximum flexibility in the design Individual housing options such as solid plastic bearings and adjustable complete housings with and without manual clamp are available. Due to the hollow chamber design, the rugged hard-anodised aluminium profile is...

...Depending on the pump housing, the diaphragm pumps operated by compressed air can be offered in metal or plastic. Air operated diaphragm pumps made of plastic The double diaphragm pumps made of plastic have a pump housing made of polyethylene or PTFE, each also in a conductive version as an ATEX pump for use in hazardous areas. The compressed air diaphragm pumps in solid construction made of...

...Enclosure system for measurement, control, and regulation technology. Our product range includes a wide selection of high-quality plastic parts. An outstanding example is our unique Brentomat enclosure system for measurement, control, and regulation technology. This enclosure system is characterized by its unparalleled uniqueness and has been specifically designed to meet the highest demands. It is not only customizable but also unique in its performance.

...Specifi cation: BRN M5x7x26 KK steel, hose connection, galvanized Grip range: 0,50 - 2,50 mm Predrilled hole ø: 7,1 + 0,1 mm Use: Connection of a pneumatic hose (ø 4 mm) for use with liquids and gases Customer advantages: • Reduction in variety of parts • Better look (single colour) • Reduced assembly effort • Simplified assembly process • Access to component from one side • Saving on material and assembly costs Sectors: • Ventilation and air conditioning technology • Pneumatics accessories • Housing and container manufacturing Material:Steel...

...The plastic enclosures of the CT series are made from polycarbonate or ABS. They are particularly suitable for encapsulating electrical and electronic components as well as complete small control systems. All enclosures are also available with a transparent cover made of polycarbonate. Available in ABS and polycarbonate materials Protection class IP65 (according to DIN EN 60529...

...Lightweight plastic housing for use in various industrial sectors such as electrical and building installation technology or heating, ventilation, and air conditioning technology. ABS is a lightweight, impact-resistant plastic with good mechanical properties. It is particularly distinguished by its high heat resistance. Our ABS standard housings are available in 25 different housing sizes with...

...Substitution of a metal housing with a plastic chassis. Plastic-friendly component design Rapid tooling and pre-series components Injection molding tools with special interchangeable insert technology for the production of up to 20 variants Series production Advantages: Weight reduction Design contours can be implemented freely Avoidance of complex pre-assemblies Cost advantages High integration density At KLAUS included: One contact person for everything - Engineering, Production, Service!

...SPIROL's BP100 Press-N-Lok™ Pin has opposing barbs on each end of the pin and is designed to permanently retain two plastic components to each other such as two halves of a plastic enclosure. Press-N-Lok™ Pins are installed in two stages: First, press the pins into one half of the plastic housing. Next, align the other half of the housing with the exposed pins and press into place. During...

... affect the measurement signal. Application areas: — Control and monitoring of production systems — Cooling and climate systems — Hydraulic or pneumatic machines — Monitoring of compressors or pumps — Mechanical engineering — Plastic processing industry FEATURES Measurement ranges from 0 ... 0.05 bar to 0 ... 500 bar and -1 ... 1 bar to -1 ... 10 bar Measurement accuracy from 0.25 % of full scale...

... with unbalanced motors (Depending on requirements, the spiral conveyor can be executed with the drives on top or bottom) • Stationary or mobile design • Open or closed design (Closed design with oscillating cover or stationary housing) Selection The sizing depends on: • Bulk material • Throughput • Desired transport height • Desired process engineering requirements (cooling or drying, etc...

... sets available upon request Description: Hub system for quick and flexible placement of systems, devices, or assembly tables, etc. Load capacity: 500 kg per lifting unit Material: Housing: Aluminum die-cast, Roll: Plastic PA, ball-bearing Roll housing: Zinc-coated steel Set: 4 lifting units 1 hydraulic drive unit 4 hydraulic hoses, each 3 m pre-filled...

... with the logger's temperature modification Resolution: 0.1 °C Housing: Molded polycarbonate, cool to the touch, high temperature <100 °C Sampling interval: 0.5 s to 60 min Trigger: Auto start/start button/temperature trigger Batteries: Replaceable 9 V alkaline (ANSSI/NEDA 1604A IEC6LR61) Battery life: 50 series of one hour min. – 5 s, 6 channels at 70 °C Memory: 18,000 readings per channel and series, hot data protection Integrated calibration data: Digital certificate Multiple series capability: 3 series max. stored separately on the DATAPAQ ET3 Professional logger...

...technoCASE is a modern plastic housing featuring design strips in gray, red, green, blue, or yellow, which can be easily snapped on to cover the screw channels and give the housing its unique appearance. A standard recess in the lid allows for the installation of front panels, foils, or membrane keypads. The wide range of standard sizes offers optimal options for a variety of electronic or...

... edges and corners. It was the first edge sanding machine in the world to be awarded the "Wood Dust Tested" certification. It works almost dust-free thanks to an exceptionally powerful extraction and a special emptying device for the dust bag. Motor housing, handle and attachments are made of abrasion-resistant, glass-fibre reinforced plastic. This converts the FLIP® into a very robust machine...

...Injection molded parts - impellers and housing covers...

... consists of a high-purity ceramic. Another special feature of the LMK 858 is the separability of the probe head and cable part. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 45 mm — chemical resistance — housing PP-HT — integrated lightning protection and increased overvoltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — cable protection — diaphragm pure ceramic (99.9 % AI2O3)...

...Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece...

...Stainless steel housing Base and lid made of plastic Maximum capacity of approximately 80 - 90 cups Brewing time for 15 liters: 60 minutes Minimum brewing quantity: 4.5 liters (30 cups) Water level indicator Descaling signal 2 separate heating systems for brewing and keeping warm Connection value: 1.6 kW / 230 V 50/60 Hz Item No.: A190196 Weight: 4.1 kg Volume: 15L Dimensions: Ø 270 mm, Height 475 mm...

...Combination of household comfort through ceramic cartridges and lightweight design through plastic housing. The spout and adjustable shower head (jet or spray, or completely shut off) are extendable with a hose (150 cm). Heat-resistant up to 3 bar. Optional equipment with microswitch.

...Features — 4-pole rotor with plastic-bonded NeFeB magnet — 3-strand winding, connected in a triangle — 3 internal Hall sensors for rotor position detection, 120° offset — Housing made of aluminum — Bearing plates as precision aluminum turned parts — Double-sided ball bearing AC/DC: 3-phase Type: brushless Voltage: 12V Additional features: 4-pole, precision...