drawing conventional

... machine, automatic lathe machine, conventional lathe machine, milling machine, drilling machine, EDM, wire-cutting machine, CNC bending machine etc. Service project: To provide production design, production and technical service, mould development and processing, etc. Testing machine: Digital Height Gauge, caliper, Coordinate measuring machine, projection machine, roughness tester, hardness tester...

...Deep Drawing is the most common tecnique for forming either symetric or asymmetric metal parts. It is a multi-purpose deep drawing method suitable for every structure. The material is held tight between the ram and the blank holder to avoid the formation of wrinkles while the force of the ram pushes the die down to wrap it around the punch. Conventional Deep Drawing Press find use in metal...

... / 1350A or EN AW-3103/3003. If necessary, there is an option to apply a draw pass to the spacer bar profile using an in-line Schumag continuous drawing machine in order to achieve the final dimension and the most demanding of tolerances.

...Hydromechanical and Conventional Deep Drawing of Thin Sheet Metal Deep drawing is one of our core competencies, in which we have decades of experience. The two variants differ in that in the conventional method, the workpiece is drawn into a stable die, while in the hydromechanical method, the process is aided by the counterpressure of a liquid medium. The maximum size of the workpieces is 1,500mm x 1,800mm. Pressing force up to 1,000t.

...DIN nuts and simple nuts according to drawing We manufacture cost-effective standard nuts on conventional machines that also meet high demands. Precision, coupling, and fit nuts, flange nuts Using state-of-the-art mass production machines and multi-spindle lathes, we produce sophisticated special nuts. Washers, covers, caps, and plates Connection and coupling parts...

... resistant Grinding parts and so on. Zirconia is widely used in the fields of the thermal barrier layer, catalyst body, medical treatment, health care, textile, and so on. This dense advanced ceramics material is usually precision ground using conventional diamond cutters and wheels. Machines used for precision grinding include: * Surface grinders * CNC milling machines * Jig grinders * Centerless grinders * CNC lathes * ID grinders Density: :≥>6g/cm3 Flexural Strength: :300Mpa Thermal Conductivity(20℃-400℃):2.5 W/ (m.K) ...

...Turning up to L = 6,000 mm Turning - CNC and conventional contract manufacturing Whether according to your drawings or samples, we will turn your components quickly and precisely, even on a contract basis. While we do not consider ourselves a contract turning shop, our versatile machine park, designed for the repair of machines and systems, is also available to our customers for turning individual parts and small series on a contract basis. Weight: up to 20 tons...

...With our CAE/CAD systems, the team has experience in designing and redesigning all types of printed circuit boards, ranging from single-sided PCBs to complex multilayer boards and flex-rigid boards, all adhering to IPC standards. Differential Pairs, Controlled Impedance, and Matched Length techniques are part of our extensive design experience. Both conventional through-hole and surface-mount...

...CNC Machining of Small Series, Individual Parts, Prototype Parts - CNC Milling, CNC Turning or Conventional - characterized by reliability and professionalism. Feel free to contact us. Whether prototypes, individual parts, or small series - whether CAD data set or hand sketch. We bring your vision to life. Our services include the machining of aluminum, steel, and plastic through CNC milling, CNC turning, or, where appropriate, conventional machining. Where necessary, we support you in advance by preparing your drawing materials in CAD.

...BPR manufactures individual parts and assemblies for you on modern machine tools according to your drawing specifications. Our machine park includes: Lathes up to 6000 mm in length and 800 mm in diameter Conventional and CNC milling machines Drilling machines and mills Balancing machine for dynamic balancing up to 6000 mm in length Welding department for up to 5000 kg...

...The use of high-strength steel wires combined with a thick aluminum coating offers significant advantages over conventional galvanized steel wires. These are high-strength steel wires that are coated with aluminum using a special extrusion process and then drawn to the required final diameter in a hydrodynamic drawing process. They are used as a substitute for galvanized steel in overhead line cables. STALUM WIRES serve both the in-house production of overhead line cables and supply the cable industry.

... folding smoothers. If there are residues in the pipe, they can be easily washed out with water and do not require cleaning agents. AMGel plus is also, like the lubricant AmGel, a water-based lubricant. Its application area includes applications where conventional oil-based lubricants fail. The areas of application are also steel, stainless steel, and aluminum. Due to its composition, it is also suitable for titanium.

...Fluid forming is a high-pressure forming process in which sheet metal plates are shaped into a desired geometry using a fluid under high pressure. Hydroforming/Fluid forming is a high-pressure forming process where sheet metal plates are shaped into a desired geometry using a fluid under high pressure. Fluid forming is similar to conventional deep drawing with a counter-form. The key difference...

...The correct choice of tool size guarantees cost-effective production. Injection machines with an injection volume of up to 2.5 liters allow for the production of large-volume molded parts (also as rubber-metal components with conventional steel qualities and stainless steel). We process the following rubber qualities: - Natural Rubber (NR) - Styrene-Butadiene Rubber (SBR) - Chloroprene Rubber (Neoprene) (CR) - Nitrile Rubber (NBR) - Fluoro Rubber (Viton) (FKM) - Silicone (SI) Due to our many years of experience, we are happy to provide you with advice. Request our technical support.

... expansion at temperatures ranging from -100°C to 200°C, which is only one-tenth that of conventional steel. Therefore, Invar is primarily used in areas where expansion due to heat input is undesirable. Common applications for Alloy 36, Vacodil include laser technology, high-precision engineering, aerospace, and measuring instruments. By combining Invar 36 with a material that has a high thermal expansion, a thermomechanical control switch can be realized through the different movements.

... has developed these composite plates for thermoformed deep-drawn parts for both indoor and outdoor use. In addition to many standard color shades, special colorings including metallic effects and a range of textures are available. The plates can be easily processed on conventional deep-drawing machines with upper and lower heating and are used in the areas of ski cases, automotive parts, sports equipment, and much more.

... increased cold rolled strength but not to the degree that would occur with SS 302. It is not recommended for deep drawing. SS 301 can be welded by all conventional processed except oxy-acetylene. The weld should not make contact with electrolytes to prevent intergranular corrosion. SS 301 is resistant to atmospheric corrosion and is additionally resistant to mildly corrosive mediums. The combination...

...Screws of all kinds, also made to drawing, special parts in all sizes; Also available in A4 quality; Thread locking and other surface treatments possible. The versatility of our conventional threaded products is unmatched. We supply threaded connections in all materials, including stainless steel, structural steel, and galvanized steel. With our extensive inventory of bolts, dowel pins, nuts...

...We manufacture workpieces according to your drawing specifications on our CNC and conventional lathes in small to medium series. Producing individual parts or prototypes is also possible. Our dedicated team places great importance on a quick and punctual processing of your orders. Materials we can work with include aluminum, stainless steel, brass, plastic, and steel. Mountings for Glass...

... requirements from the product, expected productivity, technical requirements on the press line, integration into the existing production lines, fixed and running costs, process control, fast availability of maintenance/service, availability of spare parts – all these considerations influence mainly the total cost of ownership. Our press solutions are: Conventional high speed presses from 630 kN up to 4,000 kN Conventional stamping and deep drawing presses from 1,000 kN up to 8,000 kN Cutting presses from 1,600 kN up to 6,300 kN Heavy presses from 10,000 kN up to 25,000 kN Servo presses from...

...Processing of Drawing Parts With the establishment of manufacturing capacities for mechanical processing, another pillar has been created alongside welding technology. By utilizing conventional and CNC-controlled milling machines, fully processed machine parts and assemblies can be produced. In addition to processing machine parts, there is also extensive experience in the processing of aluminum parts / aluminum castings. A state-of-the-art machine park enables precise processing of parts with a travel path of up to 3,200mm.

...Turned parts up to 50mm diameter from bar stock Turned parts up to 200mm in a chuck Conventional up to 300mm...

... - Notched pins according to ISO 8746 (DIN 1476), ISO 8747 (DIN 1477) - Pipe rivets according to DIN 7340, DIN 7339 on request - Disc springs according to DIN 6888 Almost all DIN parts can also be manufactured in modified form as drawing parts. The following processing methods are possible: sawing, milling, drilling, countersinking, threading (including inch and American threads), flat grinding, and...

... films. Our products are primarily used in forming, filling, and sealing machines as well as conventional thermoforming machines for the production of blister packaging. Another application area is the manufacturing of clear packaging such as folding boxes, round containers, etc. They are ETO and gamma sterilizable and are used for primary and secondary packaging. A significant advantage of PET is...

... of Hamburg - in the heart of Europe - we produce and deliver worldwide. Our company history shows that the determination and persistence with which the Förster family has always prioritized optimization have provided important cornerstones for today's successes. Decades of experience make us professionals with all metals. Through conventional deep drawing and hydromechanical forming, we push the...

... comprehensive and tailored approach. Customization and bespoke creation are at the heart of our philosophy. We transcend conventional limits by transforming your unique ideas into tangible reality. With Framtech, you benefit from solutions precisely tailored to your specific needs, thus delivering results that exceed your expectations.

... needs. 5/ Technical issues: Your technical problems are new challenges; we have a dedicated team of experts focused on the study and feasibility of your specific requests regarding clamping methods and precision machining. 6/ Offered products: conventional and CNC machine tools, clamping devices, bits, clamping heads, chucks, barrels, fixed and rotating points, carbide rods, custom manufacturing, and more. Rest assured, a team is here to listen to you, ready to take on any challenges to satisfy you.

...sheets, films, bottles, profiles, coatings, or filaments using conventional petroleum-based plastic processing methods such as injection molding, extrusion, pressing, deep drawing, calendaring, melt spinning, or blow molding. The company has received multiple awards for the innovation and sustainability of its products: including Green Brands Germany 2013/14, 2015/16, and 2017/18, the 2019/20...

... laser parts -Heat treatment -Surface treatment -Flat grinding -Pre-assembly Versatile and flexible. Turning with a turning diameter of up to 300 mm, a distance between centers of up to 580 mm, and a spindle passage of up to 65 mm on CNC machines. Conventional turning with a center height of up to 200 mm and a machining length of up to 1250 mm. Milling performed on manual or CNC-controlled milling...

... production. We can also offer welding of components and assembly work. Stamping certificates, material certificates 3.2 according to EN 10204, and inspections by independent technical service companies complete our offering. In this regard, we collaborate with all desired partners such as Germanisch Lloyd, TÜV, or Bureau Veritas. Our range of services: > Turning > Conventional > CNC...