cylinder holder

...In the serial arrangement, a vertically aligned linear drive shaft (double-acting linear cylinder) is mounted on the vertically aligned rotary drive shaft (swivel motor), i.e. the piston rod of the cylinder and the output shaft of the swivel motor are mechanically coupled via a movable shaft-hub connection. The pallet holder is lifted by the piston rod, which also serves as a bearing for the...

... marking Ergonomic lock arrangement at handle height, door handle with cylinder lock Double-wing door, door opening angle up to 180° Ventilation and exhaust in every cabinet level Exhaust connection on the cabinet top NW 75 Surface: Outer casing and wing door with highly durable powder coating light gray RAL 7035; inner body made of high-quality decorative panels light gray RAL 7035 Equipment: two...

...Description Material: Tension Hook and Tension Hook Holder Heat-treated steel, tempered. Design: blued. Note: Tension hooks with a collar can be screwed directly into a grid hole, etc., even without a countersink. Suitable height adjustment elements can be found under Height Cylinder 04378. Order Number: 04373-08020 D: 22 D1: M8 H Tension Range: 35 - 45 H1: 6 H2: 14 H3: 2 H4: 7 H5: 19 B: 10 C: 25 R: 20 SW: 22 Max. tightening torque Nm: 20 Max. F kN: 7.9...

... structure to reduce vibrations. The base houses the central support of the filler, the motorization, and the gears that control the movements of both the screw and the bottle entry/exit stars. The isobaric tank is fixed to the cylinder holder via the tank height adjustment device. The corresponding filling valves are installed in the isobaric tank. It comes with a control panel featuring low-voltage buttons and thermal relays. Production: from 1,000 to 15.

... — Platform for oxygen analyser — Fixing for bench vice with ‘V’ block — Holder for open weld head — Holder for manual hose package — Storage space for inverter, cooling unit, etc. Dimensions (L x W x H):1110 x 710 x 850mm Weight:unloaded approx. 70kg...

...For use in the printing cylinder of sheet-fed printing machines. Clamping bracket made of high-strength steel sheet ensures a secure fit on the shaft. Stamped part with a fit on the end faces and joined by resistance butt welding and additional TIG welding of the spring holder. Subsequently galvanized and assembled with standard parts.

... other side of the core and pulls it to the final position (this is determined by the wire length). Once in position, the wire is pulled 180° over a wire guiding roller, which consists of two mutually displaceable guiding halves, using a swivel cylinder. After this step, the thick wire is captured by a third gripper. The guiding rollers move apart, and the wire is returned to the core holder, where...

...Gas storage systems by Lipp have been successfully installed in more than 300 projects in Germany and worldwide. The gas storage capacity extends from 30 to 5,000 m³. The gas resistant PVC gas holder is protected by a galvanised steel cylinder. The self supporting roof is made of 1.4301 high grade stainless steel. The Lipp gas holder is offered as a complete system, including sensors and built in...

...STPT-80S Parallel Arm with Cylinder, for Wall Mounting or with Column Base Frame with Column Max. Torque 80 Nm; Span approximately 850mm; Tool holder max. 45mm; complete with tool carrier, column, small base plate, cylinder, and pressure regulator...

... profiles. 20/10: lock holder upright has dimensions of 60x30mm, while the crosspieces and uprights on the hinge side are 40x30mm; and as a filler chosen from our aesthetic models. Steel LOCK without central hook, is equipped with deviators that control 4 solid steel locking pins diam. 18mm, 2 upper and 2 lower (one of which is CUT-PROOF ROTATING) which intercept the closing plates installed on the shutter leaf. ½ DRILL-RESISTANT SAFETY CYLINDER equipped as standard with 1 construction site key for installation, 3 master keys and a card for their duplication.

For over 150 years, we have been supplying laboratory dealers worldwide with gas burners, stand materials, lifting platforms, and various metal instruments. We produce for laboratories, schools, universities, pharmacies, dental practices, and various industrial sectors. Our products stand for quality, durability, and design. What sets us apart is the high level of in-house manufacturing with the ...

...Fourfoldtoilet roll holder in stainless steel (AISI 304) for surface mounting. Allstainless steel housing; visible surfaces satin finished and brushed. Designed for four standard toilet rolls, three of them concealed reserve rolls, each dropping down automatically. Inspection slot to indicate fill level. Accessible for refilling through lockable, hinged housing. Keyed alike cylinder lock in corrosionresistant zinc diecasting. Delivery includes fixing material. Dimensions 353 x 350 x 120 mm...

...Made entirely of stainless steel. Pedal-operated lid opening. Gradual lid closure thanks to a hydraulic cylinder (soft contact). Front opening as well, stainless steel bag holder structure. Full compliance with HACCP standards (100% hygiene). Compliance with fire safety standards. 2 feet and 2 wheels at the back, facilitating all transfers. Reference: PPX-60 Family: Stainless Steel Sub-Family: Lid Opening with Cylinder...

...The roof tiles come from the parish church of the Assumption of Mary in Weilheim Obb., which were left over after the roof renovation. Mosaic artist Irene Magdalena Orecher had the original idea to enhance the tiles with MOSAIC. Each piece is a handcrafted and signed unique item. A glass cylinder protects the candlelight from the wind. The metalwork was created at the blacksmith shop of Berndt Schweizer in Peißenberg.

...Technical specifications: • Kubota 4-cylinder engine 36.5KW • 3-wheel drive • Hydrostatic drive with single lever • Hydraulic function management on single lever • 150-liter oil tank • 85-liter diesel tank • Work lights • Hitch compatible with category 1 and 2 tools...

...Pressure Translator Translation Ratio 1:5, 1:10, 1:20 Volume from 0.05 to 1.0 liters Shut-off Valve (pneumatic/hydraulic only) Optionally upgradeable with integrated: Forming Cylinder Workpiece Holder Path Measurement System Pressure Transducer Pneumatic/Hydraulic Translation Ratio: 1:5 Primary Pressure: 140 bar Secondary Pressure: 700 bar Pressure Fluid: Mineral Oils DIN 51524 HL, HLP Pressure Fluid Temperature: -20 to +80 °C...

...Cable and hose holder with two separate chambers, each with a maximum diameter of 12 mm. Mounting on profiles or flat elements using a cylinder screw and T-nut. Fixation of cables and hoses with O-ring. Material: PA Color/Surface: black Weight: 0.01 kg Slot: 8...

... pneumatic cylinder applied to the rear of the lathe spindle. The collet mounted in the MSCTNR chuck is a simple BA cone type. Expandable collets of type PE and PET can also be mounted using appropriate adapters. The MSCTNR chuck is equipped with a “PART EJECTOR GROUP” if the lathe does not have one. Upon request, the chuck can be supplied without the “Part Ejector Group” for installation on lathes that originally come equipped with such a group. The MSCTNR collet chuck has been designed to take advantage of the...

...Technical Specifications: • Produced by considering user needs in emergency and intensive care areas. The product is ideal for keeping all the equipment needed for immediate treatment. • 304 quality stainless steel main body, compact laminate drawers. • 5 drawers and 6 drawers models. • Adjustable defibrillator tray integrated to the upper table. • Integrated cylinder holder, IV stand...

...231 for double edge banding 1 Set of profiled cutters no. 232 profile / counter/profile SAWING 1 Wood finishing blade with alternate teeth Ø 250 x 30 x 80 Z GROOVING 1 Grooving cutter Ø 120 x 30 x 5/10 HM Z4+V4 MORTISING 3 Mortising bits left type 302 Ø 6 / 8 / 10 TENONING, GROOVING 1 Expandable tool holder Ø 150 x 20 - 39/30 Z4+V4 Ball bearing guide 1 Set of millimeter rings 1 Sanding cylinder Height 120 mm Ø 62 - Grit 100 Accompanied by the user guide: tips and illustrations for using the tools.

... mechanism for centralized locking. Lock and numbered cylinder provided with 2 foldable plastic keys. Drawers tested and guaranteed for over 50,000 opening/closing cycles. Selective opening system allowing only one drawer to be opened at a time. Max load per drawer: 20 Kg. Label holder in Light Grey color on Light Grey and Aluminium cabinets, Black on Anthracite, Beige, and Black cabinets. Ref: CDS2TCOL...

... is equipped with an angular graduation on the work table for easy-to-read curvature measurements. This horizontal press HP-20 CESURBEND can be supplied with several tools (such as punches) that can be mounted on the tool holder or die punch holders to perform various tasks. Pressing Force Specifications: 20 Tons Bending Capacity (HxEp) Specifications: 200 x 10 mm Cylinder Stroke Specifications...

...Includes clothing rail and hooks, Cylinder lock, Complete module Complete locker with perforation at the top and bottom of the door, sign holder, clothing rail with three hooks and cylinder lock. The module is fully welded with a robust construction made of powder-coated steel. Powder-coated finish with a hard and durable surface for use in public places. The simple gray finish and compact design of the locker provide a very cost-effective alternative for storing clothes and personal items.

... holder and pull-out stop (prevents unwanted complete withdrawal of the drawers) - Shelves, adjustable in 14 increments - 3-point locking system - Delivered fully assembled Shelf dimensions: W 790 x D 350 mm Material thickness: 1 mm Total height of shelves: 920 mm 15 drawers usable dimensions: H 60 x W 220 x D 310 mm 12 drawers usable dimensions: H 95 x W 220 x D 310 mm Overall dimensions: H 1790 x W 800 x D 410 mm Color: Light gray (RAL 7035) Weight: 90 kg...

... TECHNICAL DATA AND DIMENSIONS • Working table height mm. 930 • Three-phase motor power HP 5 • Net weight Kg 880 • Total weight Kg 1030 • Floor space occupied for height mm. 1340x640x1185 STANDARD EQUIPMENT ACCESSORIES Matrix holder + Punch and Matrix V 80 mm. Service key box 24 Volt electrical panel equipped with all safety features in accordance with current regulations High-capacity and reliable hydraulic unit Mechanical piece stop of 1000 mm. new machine 12 months warranty...

...with sample holder...

...","3222 3128 11":"Hose","3222 3128 12":"Water Hose","3222 3128 13":"Water Hose","3222 3129 03":"Chassis Outlet","3222 3129 47":"Hydraulic Cylinder","3222 3129 04":"Drive Unit (D7 Walking Motor)","3222 3129 48":"Rubber Coupling","3222 3129 05":"Holder","3222 3127 69":"Control Unit","3222 3129 06":"Clamp","3222 3127 67":"Dummy","3222 3127 82":"Pawl Set","3222 3127 81":"Control Panel","3222 3129 30...

...Spool holder with pneumatic cylinders for clamping the spools from the inside. The pneumatic load handling operates without an electrical connection. Only a 6-bar compressed air connection is required. Since compressed air is consumed only during effective lifting activity, this energy supply is extremely cost-efficient. As a system solution: - BalanceLift lifting cylinder: The BalanceLift...

... holder wear. Decompression mechanism prevents idle striking, thus protecting both the machine and the user. Exceptionally heat and dust-resistant motor thanks to the oversized fan and zigzag resin on the armature. The location of the function switch protects it from potential damage. Ergonomic design with rubber coating and oversized switch for easier grip and pushing along the drill axis. Rubberized side handle adjustable in 8 positions, with quick-lock depth stop.

... in the cabinet ceiling, adjustable feet. Documentation: Test report of the type-related fire test according to DIN EN 14470-2, test certificate according to the Equipment and Product Safety Act, CE conformity certificate. (Gas cylinder cabinets, safety cabinet,) Height: 2050 mm Depth: 615 mm...