coil solenoid valve

... of the magnetic head. Advantage of Solenoid Valve: High switching cycles (up to 500,000), fast switching (10 ms), and space-saving design. Please Note: The solenoid valve gets very hot in operation, up to 80°C. 100% duty cycle is possible. Technical Data: P-3_4-24A-O Temperature: -10° to 90° C Thread: G-thread Pressure: 6.0 bar Kv Value / Cv Value: 6.51 / 7.60 Coil Power: 58 W Weight: 680 g Opening Cross Section: 20.0 mm Protection Class: IP65 Seal: NBR Switching Cycles: 100,000...

... permissible coil temperature:100° C Electric connection:Soldering pins / 300 mm wire, tin-plated or with plug, 2-pin, Molex type 70066-176 Recommended peak current:0.8 – 1.2 A (default 1A) during 150 – 1000 µs Recommended holding current:160 - 330 mA (1.0 – 2.0 V DC) (default 200 mA) no time limit Micro valve weight with valve coil:3.1 g Repeat accuracy:< 5% CV Minimum pattern width:6 mm Dispensable media :Gases, aqueous media, reagents, cells, detergents, solvents, inks, varnish, oils, greases, adhesives...

... where the application should be able to start and stop the flow as and when needed. These valves have two ports that each connect to either the inlet or the outlet and use an internal plunger to open or close an orifice to control the fluid flowing through those valves. It can be configured as "Normally Open" or "Normally Closed". A Normally open two-way solenoid valve allows the media to pass through its port when the coil is de-energized and a Normally Closed valve allows the media to pass through its port when the coil is energized.

... (solenoid actuator) with direct action made of brass. Working fluid: water, air, gas, petroleum products, etc. Operating pressure from 0 Bar. Easy replacement of the solenoid (coil). Compact design. All standard voltages.

...Type 15A is a 2/2 way solenoid valve, normally closed or open, body made of brass, direct-acting, DN 1.2 – 4.0 mm, G1/8. Design: 2/2 seat valves, normally closed or open, coil rotatable by 360° Actuation: electric, manual actuation optional Connection: G1/8 Ambient temperature: -5 °C to +50 °C, higher permissible ambient temperature upon request Medium temperature: depending on sealing material...

...General Purpose Solenoid Valves Series: S10 Series Application: Air, Water, Gas (it is recommended to install a filter at the valve inlet for dirty fluids) Size: 1/8", 1/4" Direct Acting, BSP (NPT available upon request) 3/8"…2" Pilot Operated, BSP (NPT available upon request) Pressure: 0…16 Bar (1/8", 1/4") 0.5…16 Bar (3/8"...2") Body, Core: Stainless Steel Body: Brass Diaphragm: NBR, EPDM...

... manufactured on standard coil formers. However, we mainly wind onto customer-specific coil formers. We wind bobbin coils from enamelled copper wire or alternative conductor material and thus achieve optimum results in customer-specific applications. We will be happy to advise you on the optimum core material for your solenoid bobbin coil. You can also benefit from our many years of cooperation with specialised suppliers. -Different winding methods -With pin mounting -Connection of litz wires, plugs, etc. -Twisted wire ends...

... automation of fluid and gas control. This is the clearest answer that can be given to the question of what are solenoid valves. Solenoid valves; It is manufactured in two types as normally closed (to open the closed valve when it receives energy from the coil) and normally open (to close the open valve when it receives energy from the coil).

...A240 NAMUR Type 3/2 - 5/2 Convertible Solenoid Valves Proval A240 type general-purpose 3/2 way and 5/2 way solenoid valves with namur interface configuration are interchangeable for use on either double and single acting pneumatic actuators. General Features, * Direct mounting on NAMUR interface actuators * Easy convertible between 3/2 and 5/2 way(DA or SR) by replacing the o-ring position * Lockable manual operator * Standard IP65 enclosure single coil (spring return),...

...In powered mode, the field strength generated in the solenoid pulls the plunger against the spring tension out of the non-powered position. Solenoids for DC and AC voltage add considerably to the range of technical variants. As the solenoid encompasses the plunger guide tube and the plunger moves in this encapsulated structure, these solenoid valves are called plunger valves. ...

... the medium pressure, opening the main valve. A minimum differential pressure of 0.5 bar is required for full opening and closing. The special design and geometry of the internal valve components ensure a soft closing function with very low pressure peaks. The valve can be easily removed radially. - Plug-in coil system - Energy-saving AC07 coil, max. DN 13 - Housing made of plastic...

...2-Way Solenoid Valve 110RB 2T2 Alco, Pipe Connection Solder 6 mm ODF, 801217, Rated Capacities: Condensing Temperature +38°C, Evaporating Temperature +4°C, R134a - 3.5 kW, R22 - 3.8 kW, R404A/R507 - 2.5 kW, R407C - 3.6 kW. Features: • Compact design • Quick-mount clip for coil attachment • No disassembly required before soldering...

...Reference 11630-9 Detailed Description COIL 230 VAC FOR SOLENOID VALVE TYPE ES325201 DIAM. 1/4...

...Compact brass solenoid valve with a 10mm guide tube and a 22mm or 30mm coil. Available in NBR, FKM, EPDM, or other seals upon request. Coils of all standard electrical voltages available.

...Operating Pressure: 0-26 Mpa Operating temperature: -40°C up to 85°C Reliable function in fueling and operating direction small construction Aluminum, corrosion-resistant All seals are suitable for CNG Certification: ECE R 110 The valve is equivalent the heavy metal regulation Burst Pressure:> 1000 bar, 20 ° Orfice diameter: 4, 6mm Incl. excess flow limiter Incl. manual valve Incl. TPRD, glassbulb 110°±5%, minimal release time, orfice 4, 6, 8mm Incl. 12V coil or 24V coil, AMP junior connector Incl. fitting for 6, 8mm tube or 3/8" Tightness: 1x10-5mbar l/s, 20°C, 100% He...

...2/2 Solenoid Valves for Compressed Air On/Off Valve NPSF 1/8" Connections Coil 0.6 W Electrical Connections: DIN (c) For Piab vacuum pumps up to Classic size. Priority manual control...

... deliver high quality product. CHOOSE YOUR VALVE: Body: Single outlet:118/A118/B118/C118/D118/E118/F118/G118/H118/J118/L118/M109/A Double outlet:218/A218/B209/A Triple outlet:318/A Coil: 220-240V AC,110V AC,24V AC/DC,12V AC/DC Flow: 1 -2.5 -3 -3.8 -4 -5 -7 -8 -10 -12 L/min,optional Other specifications: Valve body material:Nylon reinforced with glass-fiber. Diaphragm material:EPDM, NBR, SILICONE or FPM. Solenoid:Encapsulated in waterproof material, self-extinguishing. Insulation class:CLASS H. Coil connectors:Tab 6,3 mm, Rast 2.5, Rast 5; coil position optional. ...

...The ultra-compact and extremely light Nova Swiss solenoid valve is designed for hydrogen and inert gases applications for an operating pressure of up to 1000 bar. Your applications can now be realised even more cost-efficiently thanks to its minimal dimensions. The piloted 2-way on/off valve, manufactured from stainless steel, is monostable (normally open or normally closed). It features a flow coefficient KV = 0.6 m³/h. If the current drops at the solenoid coil, the normally closed valve closes reliably and tightly (safety function).