catalyst

... isomerization catalyst for the production of polyurethane rigid foams. Specific fire extinguishing agents and the modification of catalysts are additional uses. CAS 127-08-2 EINECS 204-822-2 Dr. Paul Lohmann® conducts product and application development in close collaboration with customers. This includes the adjustment of chemical and physical parameters such as bulk density, wettability, particle size, purity, or pH value.

... logistical advantages as shorter shutdowns can also be used. Comprising a catalyst volume of up to 50 cubic metres simply requires three to five days which includes the building site installation. During the “Wildeshauser Catalyst Days” in September 2008, incineration plant owners reported their experiences with our in-situ-cleaning, in detail.

...HyperTex Active Catalyst is a silicone-based fluid product used as a catalyst in two-component. No color changes after curing Suitable viscosity for printing High and low heat resistance HyperTex Active Catalyst is added to the silicone mixture and mixed to start curing. The maximum recommended mixing amount is 100:3. Appearance Visual:Clear Mixing Ratio:<100:3 Viscosity at 25°C LVDV-E 230, Brookfield:1000...

...CTP's AutoKAT combines the advantages of regenerative thermal oxidation with those of catalytic oxidation. The AutoKAT is a very cost-effective alternative for well-understood waste streams. Existing RTO systems can be upgraded to an AutoKAT. CTP has developed the special honeycomb catalyst for this type. Highest thermal efficiency Constant high cleaning performance – even for low-oxygen gases Extremely energy-saving Easy access to the catalyst modules Very compact system: low space requirement...

...AminCat PMDETA catalyst (Pentamethyldiethylenetriamine) is a highly active, pure liquid tertiary amine which has C9H23N3 as chemical formula. This substance is suitable for use as a blowing catalyst in a number of applications. Pentamethyldiethylenetriamine is also known as PMDETA, PMDTA, PMDT and N[2(dimethylamino)ethyl]N,N’,N’trimethylethane1,2diamine. Availability Europe and United States...

...COPLACAT is a catalyst for the decomposition of hydrogen peroxide for the disinfection of cork stoppers. It acts as an accelerator in the disinfection process of cork stoppers by irreversibly destroying the active systems of the cells of microorganisms.

... CCMs. By replacing platinum with a cost-effective metal oxide catalyst, material costs can be significantly reduced. The advantages of this new CCM are: • reduced costs: expensive platinum is not required • extended durability: the metal oxide catalyst is far less prone to poisoning compared to platinum • efficiency: high current densities and hydrogen production rates are achievable...

...Fulltech 5W-30, is a synthetic engine oil that fullfills the performance requirements of new technology engines. It is especially developed for Volkswagen, BMW and Mercedes-Benz vehicles. Also it can be used in other diesel or gasoline engines of passenger vehicles and light duty vehicles. Its special formula improves efficiency of exhaust gas after treatment systems such as Diesel Particulate Filter (DPF) and Three Way Catalyst (TWC) and extends their service life. ...

...Most users of PSA nitrogen generators demand the highest levels of nitrogen purity by the most cost-effective means possible. Mikropor's brand new MDX nitrogen purification system offers an extremely economical way to increase nitrogen purity levels beyond 99.5% or 99.9% up to a purity of 99.999%. The MDX range enhances nitrogen purity by using a specially designed catalyst with a large surface...

...In the fast-paced realm of business, innovation is the key to staying ahead. Our Research and Development (R&D) services are meticulously designed to propel your business into the future by seamlessly integrating Artificial Intelligence (AI), Internet of Things (IoT), and cutting-edge data analytics. Discover how our bespoke solutions can be the catalyst for a sustainable competitive advantage...

...Crux Collaboration Table is more than just a piece of furniture; It is a catalyst for creativity and synergy. It turns ordinary meetings into extraordinary brainstorming sessions, encouraging the free flow of ideas and open communication. Whether you are a small team looking for innovative solutions or a large team aiming to revolutionize your industry, the Crux Collaboration Table is your...

...YGK Chrome 98 - YGK Chrome Application:Decorative and functional application in automotive and sanitary field Function:Best corrosion protection for nickel-plated layers, liquid catalyst, simple handling...

...Nickel catalyst for generation of endo gas by partial oxidation of methane or propane, respectively, and for dissociation of ammonia.

...Potassium hydroxide is an inorganic compound commonly called caustic potash Along with sodium hydroxide (NaOH), KOH is a prototypical strong base, It has many industrial and niche applications, most of which utilize its caustic nature and its reactivity toward acids Industries: Household chemicals, Fertilizers, Cosmetic industry, Adhesives, oils, greases, Resins, plastics, polyurethanes Catalyst...

... Association) through their FC-W Catalyst Compatible® oil standard, ensuring top-notch quality and compatibility with advanced catalyst systems. By delivering exceptional wear and corrosion protection, as well as effectively reducing deposits and oil consumption, FC-W Outboard Oils uphold peak engine performance and reliability. This, in turn, extends the engine’s lifespan, making it a trusted choice for the demanding requirements of four-stroke outboard engines. Available in:Bulk, 200 Litres, 20 Litres, 5 Litres and 1 Litre Item code:VI8-2137A (10W-30)...

...This is a high-performance synthetic motor oil that meets the requirements of the new generation of engines. It has been developed to maintain and extend the efficiency of emission systems in passenger cars with diesel and gasoline engines and is fully compatible with the diesel particulate filter (DPF) and the three-way catalyst. diesel and gasoline engines and is fully compatible with the...

...Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) Gas:NH3 Principle of detection:Tunable Diode Laser Spectrometry (TDLS) Ranges:0-100 / 0-20 ppm Precision 2σ :1.8 ppm @ 1 s; 0.8 ppm @ 10 s Response time:< 2 sec (T90) (at gas flow rate of 3 L/min) Cell temperature range:190°C Operating temperature:+15 to +50°C Communication:RS 232 Dimensions:Rack 19″ – 3U...

...Catalyst grids, rcduccrs for reformer tubes, tube bends and T-junctions Material: high-alloyed austenite steel W.Nr. 1,4848, 1,4852 micro, 1,4852 macro, 1,4859...

... quality standards. With its superior composition, it acts as a catalyst, bringing forth remarkable improvements in the properties of aluminum. When incorporated into aluminum alloys, our 4.4.1 grade Metal Silicon works wonders, enhancing the castability of the metal. This means smoother and more precise casting processes, resulting in superior finished products. Whether you're in the automotive, aerospace, or construction industry, Metallic Silica is the ideal choice to optimize the properties of your aluminum products. ...

... with heat exchangers that utilize the residual heat from the clean air to preheat the incoming exhaust gases or to provide heat for use in the customer's production lines. Properly designed and sized catalytic oxidizers ensure maximum performance for the reduction of volatile organic compounds, and consequently, the lowest emissions into the atmosphere. Thanks to the presence of one or more catalyst beds, the destruction of pollutants occurs at temperatures ranging from 300°C to 500°C.

...i-qube® is not just any drink—it's a catalyst for change. Each sip is crafted to enhance your brain function, increase your productivity, and improve your perception of yourself and the world around you. It's the perfect partner for athletes, professionals, students, or anyone who wants to step up their game in life's relentless competition.

...Translation Memory: SDL Trados, Atril Déjà Vu, Star Transit, Wordfast, Accross, MemoQ, Corel Catalyst, Microsoft LocStudio.

...Concentrated nitric acid for industrial de-water agent, manufacture of explosives, catalysts and other magnesium salts and nitrates catalyst raw materials, wheat ashing agent. Used in agriculture, magnesium soluble fertilizer for soilless culture. Packing: Plastic woven bag or paper-plastic composite bag, lined with plastic bag, net weight 25/50/500/1000KG or according to customer’s requirements. Storage: Firmly sealed in dry, dark and cool warehouse. Refrain from rain and sunlight. Molecular weight:256.40 CAS No:13446-18-9 UN NO:1474...

We are manufacturers of chemical products such as AdBlue, vehicle care products (de-icers, antifreeze, etc.), household cleaners, distilled water, and much more under RETAILER’S BRANDING or our own brand Robbyrob. Our headquarters is located in Berlin, Germany, and our production site is in Vetschau, Brandenburg, just an hour's drive from Berlin. We have a production site with 400,000 m² of open...

... necessary for the intended use from time to time (2-3 kg of mixture at a time may be more that sufficient). The mixture of SYNTECH H.A.G. ECO and its catalyst can be injected with a manual or electric pump for monocomponent resins, at pressures ranging between 40 and 200 bar. The reaction speed can easily be adjusted based on the accelerator (component B) quantity. Adding a greater quantity of catalyst...

...ALWA HT RESIN is a resin-based on isocyanate and epoxy (EP), which reacts after adding a catalyst. ALWA HT RESIN offers a range of possibilities for producers of fibre-reinforced materials (e.g., glass fibre, kevlar and carbon), semi-finished and finished goods. The system is also suitable for prepreg and reaction compounds. ALWA HT RESIN is particularly interesting for the aerospace and aircraft...

...What you can expect with RCS APROVIS catalysts: - RCS housing with insulation - Optimized honeycomb design of the catalyst - Injection section with static mixers - Daily reservoir - Dosing station for precise dosing of the reducing agent - Continuous measurement of nitrogen oxides (NOₓ) - Controlled injection of urea based on measured NOₓ values - High conversion rates and longevity...

... made of thermosetting polyester resin that impregnates long glass fibers (20 to 30% of this reinforcement), along with fillers and a catalyst (hardener). The mixture is ready for hot pressure molding (a press compresses it at a temperature between 140 and 160°C and a pressure ranging from 50 to 100 bars) in a closed mold.

...Pearls Made Of Polystyrene Expanded polystyrene pearls can be used to fill puff armchairs, but also as heat-insulating material in the composition of rugs. Polystyrene is a product resulting from the polymerization of an aromatic styrene monomer, obtained as a petroleum derivative, in the presence of a peroxide catalyst. The final result is a solid powder, having the structural components...

...Trifluoroacetic acid is a fluoro-organic compound with an interesting list of uses in the manufacturing of pharmaceutical active ingredients, plant protection products, peptides, and polymer chemistry. Typical applications include: - CF3 module - Polymerization catalyst - (Trans-)esterification promoter - Amino acid protecting group (e.g., DIBOC) - Non-aqueous solvent - Hydration of olefins...