epoxy Belgium

...-filtration solution. Higher capacity filters can achieve a surface area of 45,200 cm². BMF basket filters can be supplied in carbon steel, with a Rubber or Epoxy coating, in stainless steel 304L or 316L. The maximum working pressure is 10 bar, with configurations of 16-25 bar also available. YMF basket filters are Y filters that offer a larger filtration area compared to the standard model available on the market.

... black borders and a 30 cm top border, or without black borders and also in a tensioned version. Refined design! The mounts and the control and power cable are invisible. Silent motorized system for smooth and controlled handling of the fabric. Intelligent design and easy to install. Extruded aluminum casing with black epoxy finish (RAL 9005 – other RAL colors available upon request). PRO model...

...Pneumatic Actuators Actreg Characteristics: Standard 90° pneumatic actuator for 1/4 turn valve Construction Standards: Connection to the valve according to ISO 5211/DIN 3337 Connection of the solenoid valve according to NAMUR Minimum supply pressure: 1 bar Maximum supply pressure: 8 bar Minimum external temperature: +0° C Maximum external temperature: +80° C Body: Anodized aluminum Flanges: Aluminum + epoxy paint Pistons: Aluminum Gears, Springs: Carbon steel Stop screws: Stainless steel AISI 304 Sealing gasket: NBR...

...Stainless steel drum and tank AISI 304. Base made of steel (epoxy paint). Mechanical timer from 0 to 15 minutes. Delivered with bolts for anchoring to the ground. Reference: DEC-30 Brand: Diamond Europe Net weight (kg): 400 Dimensions in MM (LxWxH): 980 x 1150 x 1050 Volume (M³): 1.64 Power (kW): 5.5 Supply (Volt): 400-230/3N 50-60Hz...

... class H available upon request - Stored speeds: 3000 rpm or 1500 rpm or 1000 rpm or 750 rpm - Efficiency IE3/IE4 (IE5 coming soon) - Design B3-B5-V1-B14-B35-V15-B34 - Motor sizes from 56 to 160 - These motors can be equipped with options such as special PTO or PT100 sensors - IP56 option - Standard motors with PTC sensors - These motors can be equipped with options such as special sensors, coil holes, heating resistors, umbrella covers, specific epoxy paint - C3M - C5M...

... VOC-free system for application on galvanized surfaces with very good performance in various environments, such as C5-1 and C5-M according to ISO12944-6 standards. Combined with a BPA/BPF epoxy resin, this product is used for the manufacture of a water-based primer applicable to both absorbent and non-absorbent construction material substrates. Orientation formulations are available with liquid and solid epoxy resins.

...After 40 years, the Dyle flows again at the surface at Zandpoortvest. The former parking lot of the Thomas More Higher School has been transformed into a green and open meeting place. We have installed modern black lacquered flat steel railings along the banks. On the existing towpath, built in 1903, we replaced the original wooden decking with epoxy resin-treated steel decking featuring non-slip...

Lambert Chemicals is a family-owned business based in Herstal, Belgium, specializing in the distribution of chemical products since 1987. We offer chemical products for industries such as acids, bases, solvents, alcohols, as well as products for water treatment and specialties for the food sector. Our chemical products are intended for both wholesalers and retailers; our range includes chemical pr...

... with products that are certified safe. All epoxy tables are custom-made. Regarding the lead time for epoxy dining tables, you should expect a wait of 6 to 8 weeks after order confirmation. The color of the epoxy resin for the tables is 100% customizable. You can choose transparent, opaque epoxy, or even epoxy with patterns and glitter for your table; there are no limits to customization. Contact us for a personalized quote for your epoxy table.

RésiDesign, your specialist in resin flooring. Our company based in Marche-en-Famenne positions itself as your preferred partner for high-quality resin floors for your homes and professional spaces. Our epoxy and polyurethane resin flooring solutions meet all your aesthetic and functional needs. For a modern decor and outstanding performance, this flooring is the solution to enhance your interior...

...Wall-mounted and freestanding ashtrays - PB-ATF-0291 Brand: Probbax Description: TUBULAR WALL ASHTRAY 1 L UP TO 300 CIGARETTE BUTTS Features: Epoxy galvanized steel With key and mounting kit Outdoor use Capacity: 0.9 kg Ext. dimensions: Width: 100 mm Height: 100 mm Depth: 500 mm Material: Metal / steel...

...Epoxy Technology offers a comprehensive range of electrically and thermally conductive epoxy adhesives for the semiconductor, optoelectronic, automotive, aerospace, and electronics industries. Our extensive product range allows users to easily select the optimal adhesive for their specific application, based on the presence of physical, electrical, and mechanical characteristics. EPO-TEK electro...

...A resin floor is made from a synthetic material: epoxy resin (harder) or polyurethane (softer). A resin floor allows for a slightly more unified result than concrete, but all types of finishes are possible by playing with colors, shades, matte or glossy. A resin floor is particularly well-suited for a modern interior (kitchen, playroom, etc.). Whether you choose epoxy or polyurethane resin, a resin floor always offers a great number of advantages. Here are a few!

... slipping with needle stop and automatic restart - Extra-large rollers for maximum contact with tires, and excellent braking test - Electronic measurement system with strain gauges - Closed self-supporting chassis - Choice between welded steel rollers or epoxy rollers - TUV and CE approved Numerous options available: analog or light indicator for difference, walkable roller covers, foot or hinge for display, printer, remote control, etc.

... these anchors is ensured by welding, properly protected by a touch-up with epoxy paint or similar. Between the frame and the civil engineering opening, a lean concrete of fine granulation is tightly packed with re-pointing. DOOR LEAF Double-faced smooth electro-galvanized steel with a thickness of 1.5mm, insulated with a mattress of rock wool of varying density, a supplementary 10mm screen, and an anti-vibration projection for low frequencies. The thickness of the door leaves is 63mm. The door leaf is equipped with a double neoprene sealing strike.

...The casing of the "Air Centre" compressed air units is coated with a corrosion-resistant and scratch-resistant epoxy paint. The padding of the interior panels with soundproofing material ensures a very high level of noise reduction. The wide opening doors and easily removable panels provide easy access to all parts of the compressor for maintenance and service interventions. The direct inline...

...RAINWATER FILTER Dimension 58/58/35 GREASE TRAP Concrete grease trap 560L Concrete grease trap 800L Concrete grease trap VVDG 4/6 + Epoxy 3000L DISCONNECTOR Dimension 58/58/35 RAINWATER FILTER Dimension 58/58/35 GREASE TRAP Concrete grease trap 560L Concrete grease trap 800L Concrete grease trap VVDG 4/6 + Epoxy 3000L DISCONNECTOR Dimension 58/58/35...

... aluminum grilles are visible from the pool side. The casing is made of galvanized steel. All external and internal parts of the casing are coated with powder paint. The evaporator and condenser coils are protected against corrosion by an epoxy coating. The CDP (T) is mounted on the wall using an anchoring bar supplied with the unit. They are fully automatic, ultra-quiet, and controlled by a built-in...

...Epoxy paint thickness 50 µm. The lifting nut and reduction gears are machined to allow for more efficient and smoother operation during lifting maneuvers. High-strength lifting chain made of alloy steel, category 80, with a blackened finish for corrosion resistance. Galvanized maneuvering chain. The compact design of the ZHV results in a device that is smaller and lighter. This hoist is ideal for...

... looking for on this site, send us a message by email. Indeed, we are manufacturers and we have a vast range of sizes, models, and colors. We cannot display everything on our site. Our email: info@laubeyne.com or click at the bottom of the page. All our lampshades are handmade. Our quality finish is achieved with a tone-on-tone glued bias. The fittings are always E27. Bulb from 700 to 1300 lumens depending on the size of the lampshade. All our frames are protected by an epoxy-based oven paint. Reducer...

... design of active parts. High endurance of contacts is assured by multiple inserts, up to 50.000 close-open cycles. Mechanical endurance class M2 (= min. 10.000 C-O) Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Standard execution is 3-pole: also available in 1- or multiple pole version. On demand: mounting possible in each position. On demand: High Endurance (=HE) execution (>50.000 C-O) Below you'll find the different executions and accessories of the MI-COMP family:Here you'll find a list of several accessories of the MI-family...

... 7010 and European directive 92/58/EEC. CONSTRUCTION • Construction in 12/10 steel double walls. • Mineral fiber insulation 20 mm thick according to the NF EN ISO 1182 standard. • White epoxy paint RAL 9010. • Standardized symbols "harmful", "toxic" or "flammable" (to be specified at the time of order). • Adjustable retention shelves on rack.

Specializing in the installation of special floor coverings such as polyurethane and epoxy resins, Tene Arte has many years of experience serving some of the biggest names in the industry. Our team consists of professionals who have been active in the field for many years. We are at your service to find the most suitable solutions for your professional needs and type of activity.

...Merlot table from the Dressy collection by Mobliberica. High-resistance ceramic top (scratch-resistant, stain-resistant, colorfast, and thermal shock resistant) High-resistance epoxy steel legs Available with or without extension. Ceramic extension. Metal structure (30 colors): Rubber wheels under the legs to prevent noise and scratches Top and internal extension in ceramic (30 finishes) mobliberica: 130X80X75 CM...

...Butterfly valve body made of ductile iron coated inside/outside with food-grade rilsan or epoxy body also available in steel or stainless steel Short or long footprint, operated by handwheel, square drive, or pneumatic or electric actuator variant: high pressure, threaded or welded connection Pressure/temp couple according to your service conditions Nominal diameter according to your service conditions Nominal pressure according to your service conditions Usage Isolation for drinking water, neutral liquids, loaded fluids...

...Plastic, epoxy, polyester, alkyd, quartz floors, roofing, ... NATURAL OXIDES: yellow, red, brown, black SYNTHETIC IJZEROXIDES: yellow, red, brown, black DRAGON PIGMENTS: red, yellow, blue, green, grey CHROME OXIDE GREEN COBALT OXIDE: green, blue CARBON- or PITCH-BLACK MILORI OR PRUSSIAN BLUE CHROME GREEN YELLOW: PY 1, PY 3, ... RED: PR 2, PR 3, ... GREEN: PG 7, PG 8...

...The Alea Archimède desk is executive furniture with a sleek and original design. Its design is simple yet innovative, with the Archimède supporting structure made of electro-welded tubular steel and finished in epoxy lacquer available in 10 shades. The Archimède base allows for the support of a thick tabletop (40 mm) without the need for a beam. The Archimède tabletop is available in melamine, wood veneer, glass, or leather. Meeting tables, available in round, square, or rectangular shapes, complete this range.

...-time spectral analysis of the velocity distribution through the cross-sectional area Measurement validation through quality parameters Auto-diagnostic tools Combine the BELUGA with an IFQ MONITOR for stationary flow monitoring or with an IFQ LOGGER for portable/temporary flow monitoring. KEY FEATURES: Improved accuracy due to digital spectral analysis of the velocity distribution Easy integration with existing SCADA or telemetry systems Embedded RS485 communication port with Modbus ASCII protocol Straight 4-20 mA output for velocity ERTACETAL outer shell with epoxy potting wi...

... XXL. Discover now and give your dog the comfortable resting place they deserve! Material: metal Easy to move thanks to the removable plastic handle With an epoxy powder coating 2 Doors, each with 2 sliding locks Foldable with protective feet to prevent scratches Easy to clean thanks to the pull-out plastic tray Horizontal, vertical, and frame wire thickness: 4 / 3 / 4.8 mm...

...sliders and seals, frames, locks and screws, feet, wheels and sockets, PVC end caps, tools, and more. Stantech also offers the following special services: cutting, punching, welding, epoxy coating, drilling, milling, bending, painting, and anodizing. As a new feature, we offer a mounting system for the "éclair" spotlights as well as LED lighting specifically designed for stands.