Splined shafts at profile - Toothed belt pulleys Splined shaft Timing belts
Splined shafts at profile - Toothed belt pulleys Splined shaft Timing belts

Splined shafts at profile - Toothed belt pulleys Splined shaft Timing belts

Standard ATprofile with metric pitch (trapezoidal toothing). For manufacturing your own toothed wheels Reference:22008 Material:Aluminium Version:Bright
Similar products
1/15
Toothed belt pulleys t profile - Toothed belt pulleys Splined shaft Timing belts
Toothed belt pulleys t profile - Toothed belt pulleys Splined shaft Timing belts
Aluminium. Rim flanges, steel. Version Aluminium bright. Steel electro zincplated. Note Standard T profile acc. to DIN 7721 T2 with metric pitch (trap...
FR-10280 Fontaines Les Gres
T-profile Timing Belt - Sprockets - Tooth Bars - Timing Belts
T-profile Timing Belt - Sprockets - Tooth Bars - Timing Belts
Endless toothed belt with a trapezoidal profile according to standard DIN 7721 T1 with a metric pitch. Ideal for drive systems requiring high belt fle...
FR-10280 Fontaines Les Gres
Steel bevel gear, ratio 1:1 Straight cut teeth - Straight gears Rack Bevel gears
Steel bevel gear, ratio 1:1 Straight cut teeth - Straight gears Rack Bevel gears
Milled gear, straight engagement. Pressure angle 20°, natural. Axial angle = 90° The bevel gears are supplied individually. To obtain a bevel gear, pl...
FR-10280 Fontaines Les Gres
Splined shafts similar to din iso 14 - Splined shafts and splined hubs
Splined shafts similar to din iso 14 - Splined shafts and splined hubs
Spline shafts based on DIN ISO 14 with straight parallel flanks. A spline shaft with spline hub is used to transmit high torques while enabling simult...
FR-10280 Fontaines Les Gres
Round stainless steel racks, straight milled teeth, angle of - Straight gears Racks Bevel gears
Round stainless steel racks, straight milled teeth, angle of - Straight gears Racks Bevel gears
Milled gear, straight engagement. Pressure angle 20°, polished. Outer diameter stretched tolerance h9. The racks are milled on the tooth side. This re...
FR-10280 Fontaines Les Gres
Gear racks plastic injection moulded straight teeth - Gears / Gear Racks / Bevel Gears
Gear racks plastic injection moulded straight teeth - Gears / Gear Racks / Bevel Gears
Injection moulded, straight teeth. Engagement angle 20°. Polyacetal, white. Polyketone, ivory tone. Note Polyacetal Standard material with high hardne...
FR-10280 Fontaines Les Gres
Steel Gear, Module 3, Straight Cut Tooth, Angle of - Straight Gears, Racks, Bevel Gears
Steel Gear, Module 3, Straight Cut Tooth, Angle of - Straight Gears, Racks, Bevel Gears
Milled denture, straight engagement. Pressure angle 20°, natural. Up to 48 teeth with hub, from 50 teeth without hub. Reference: 22400 Material: Stee...
FR-10280 Fontaines Les Gres
HTD 8M Sprockets for mounting with stop flanges - Sprockets with toothed bars and toothed belts
HTD 8M Sprockets for mounting with stop flanges - Sprockets with toothed bars and toothed belts
HTD standard profile with a metric division (semi-circular tooth). At least one gear must have guiding flanges. Tapered hole for Taper stop flanges. T...
FR-10280 Fontaines Les Gres
Right-threaded worm gears with a 17 mm center distance - Worm screws and worm wheels
Right-threaded worm gears with a 17 mm center distance - Worm screws and worm wheels
Endless steel screw. Helical gear CuZn37Mn3Al2PbSiS40. Endless screw with right-hand pitch, hardened HV 620 – 700, flanks and drilling ground. The gea...
FR-10280 Fontaines Les Gres
Chain tensioner sets - Chains and sprockets
Chain tensioner sets - Chains and sprockets
Tensioner Vesconite® plastic. Screw and nut steel. Version Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. N...
FR-10280 Fontaines Les Gres
Steel Chain Tensioner Kits - Chain Tensioner
Steel Chain Tensioner Kits - Chain Tensioner
Chain tensioners are primarily used in the construction of machines and installations. They allow for the tightening of round parts, large or very lar...
FR-10280 Fontaines Les Gres
Clamping Elements in Stainless Steel - Chains and Sprockets
Clamping Elements in Stainless Steel - Chains and Sprockets
Body made of Inox 1.4308 starting from size 5 in 1.4301, clamping arm in Inox 1.4301. Elastic body made of natural rubber. Screws in Inox A2. Natural ...
FR-10280 Fontaines Les Gres
Cam levers internal or external thread stainless steel thrust - Cam clamps
Cam levers internal or external thread stainless steel thrust - Cam clamps
Handle electropolished or blasted. Thrust washer, hinge pin and screw bright. Note: The thrust washer face is lightly greased before delivery. The gre...
FR-10280 Fontaines Les Gres
Swivel feet plates die-cast zinc or stainless steel - Levelling feet, swivel feet, machine feet
Swivel feet plates die-cast zinc or stainless steel - Levelling feet, swivel feet, machine feet
Plate die-cast zinc or stainless steel 1.4305. Anti-slip plate thermoplastic elastomer. Version: Die-cast zinc plate, black powder-coated. Stainless s...
FR-10280 Fontaines Les Gres
Lifting Straps - Fixed and Swiveling Lifting Rings, Self-Locking Pin Rings
Lifting Straps - Fixed and Swiveling Lifting Rings, Self-Locking Pin Rings
Bicouche. The end loops are fully reinforced on both sides, rejuvenated to half the width of the strap. The lifting straps comply with the DIN EN 1492...
FR-10280 Fontaines Les Gres

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play