Steel bevel gear, ratio 1:1 Straight cut teeth - Straight gears Rack Bevel gears
Steel bevel gear, ratio 1:1 Straight cut teeth - Straight gears Rack Bevel gears

Steel bevel gear, ratio 1:1 Straight cut teeth - Straight gears Rack Bevel gears

Milled gear, straight engagement. Pressure angle 20°, natural. Axial angle = 90° The bevel gears are supplied individually. To obtain a bevel gear, please also order the corresponding mating gear indicated in the table. Reference: 22430 Material: Steel 1.0503 (C45)
Similar products
1/15
Gear racks round stainless steel toothing milled straight - Gears / Gear Racks / Bevel Gears
Gear racks round stainless steel toothing milled straight - Gears / Gear Racks / Bevel Gears
Milled toothing, straight teeth engagement angle 20°, bright. Outside diameter extruded, tolerance h9. Note The gear rack teeth are cut using a hob mi...
FR-10280 Fontaines Les Gres
Gear racks plastic injection moulded straight teeth - Gears / Gear Racks / Bevel Gears
Gear racks plastic injection moulded straight teeth - Gears / Gear Racks / Bevel Gears
Injection moulded, straight teeth. Engagement angle 20°. Polyacetal, white. Polyketone, ivory tone. Note Polyacetal Standard material with high hardne...
FR-10280 Fontaines Les Gres
Plastic gears, module 0.5 treated by spraying - Straight gears Rack gears Bevel gears
Plastic gears, module 0.5 treated by spraying - Straight gears Rack gears Bevel gears
Spray-treated, straight tooth profile. Pressure angle 20°. Machined bore. White polyacetal. Ivory polycétone. Polyacetal is a standard material with h...
FR-10280 Fontaines Les Gres
Right-threaded worm gears with a 17 mm center distance - Worm screws and worm wheels
Right-threaded worm gears with a 17 mm center distance - Worm screws and worm wheels
Endless steel screw. Helical gear CuZn37Mn3Al2PbSiS40. Endless screw with right-hand pitch, hardened HV 620 – 700, flanks and drilling ground. The gea...
FR-10280 Fontaines Les Gres
Gear Wheel Kits - Chains and Sprockets
Gear Wheel Kits - Chains and Sprockets
Steel sprocket. Steel ball bearing. Steel screw and nut. Sprocket with hardened teeth HRC 50, zinc-coated. Ball bearing with 2ZC3 sealing rings. ISO 4...
FR-10280 Fontaines Les Gres
Splined shafts at profile - Toothed belt pulleys Splined shaft Timing belts
Splined shafts at profile - Toothed belt pulleys Splined shaft Timing belts
Standard ATprofile with metric pitch (trapezoidal toothing). For manufacturing your own toothed wheels Reference:22008 Material:Aluminium Version:Bri...
FR-10280 Fontaines Les Gres
HTD 8M Sprockets for mounting with stop flanges - Sprockets with toothed bars and toothed belts
HTD 8M Sprockets for mounting with stop flanges - Sprockets with toothed bars and toothed belts
HTD standard profile with a metric division (semi-circular tooth). At least one gear must have guiding flanges. Tapered hole for Taper stop flanges. T...
FR-10280 Fontaines Les Gres
Roller chains single din iso 606 curved link plate - Chains and sprockets
Roller chains single din iso 606 curved link plate - Chains and sprockets
Packaging unit 5 metres with odd number of links. Ending with an inner link at both ends. Connecting links must be ordered separately. Note Europeanty...
FR-10280 Fontaines Les Gres
Simple Sprockets 3/4" x 7/16" Stainless Steel DIN ISO 606 - Chains and Sprockets
Simple Sprockets 3/4" x 7/16" Stainless Steel DIN ISO 606 - Chains and Sprockets
Sprockets with a hub on one side for roller chains according to DIN ISO 606. The sprockets have a centering point or are pre-drilled (this may vary de...
FR-10280 Fontaines Les Gres
Ball-end thrust screws without head stainless steel with - Ball-end thrust screws and baseplates
Ball-end thrust screws without head stainless steel with - Ball-end thrust screws and baseplates
Surfaces which are not flat and parallel can be firmly clamped or supported with with a flattened ball, the movable ball can adapt itself up to 9°. Lo...
FR-10280 Fontaines Les Gres
T-profile Timing Belt - Sprockets - Tooth Bars - Timing Belts
T-profile Timing Belt - Sprockets - Tooth Bars - Timing Belts
Endless toothed belt with a trapezoidal profile according to standard DIN 7721 T1 with a metric pitch. Ideal for drive systems requiring high belt fle...
FR-10280 Fontaines Les Gres
Steel flat head screw with tolerance compensation for floating - Connecting elements
Steel flat head screw with tolerance compensation for floating - Connecting elements
The floating joint unit is a bolt for connecting two components, that permits a desired movement of those components in relation to each other. The fl...
FR-10280 Fontaines Les Gres
Sprockets single 3/8" x 7/32" din iso 606 ready to install - Chains and sprockets
Sprockets single 3/8" x 7/32" din iso 606 ready to install - Chains and sprockets
Ready to install sprockets with hub on one side for DIN ISO 606 roller chains. Teeth are milled and inductively hardened. Keyway acc. to DIN 6885 / BS...
FR-10280 Fontaines Les Gres
Bearing flange for feed roller - Special elements
Bearing flange for feed roller - Special elements
Bearing flanges and fastening pieces PAGF. Bolts steel. Black. Bolts electro zincplated. Two bearing flanges combined with a D50 type I aluminium prof...
FR-10280 Fontaines Les Gres

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play