Roller chain duplex stainless steel din iso 606 curved link - Chains and sprockets
Roller chain duplex stainless steel din iso 606 curved link - Chains and sprocketsRoller chain duplex stainless steel din iso 606 curved link - Chains and sprockets

Roller chain duplex stainless steel din iso 606 curved link - Chains and sprockets

Packaging unit 5 metres with odd number of links. Ending with an inner link at both ends. Connecting links must be ordered separately. Note Europeantype DIN ISO 606 roller chains with curved link plates (ISO No. 06 with straight links). All chains are prestretched. Not lubricated, the chains must be lubricated depending on the application. The stainless steel roller chains offer excellent corrosion protection and good chemical resistance. They can be used in applications with water and at high temperatures. B7 = maximum value for links. Pitch = PxB1 Reference:22213 Material:Stainless steel 1.4301 Version:Pre-stretched Temperature range:-20°C to +400°C
Similar products
1/15
Simple Sprockets 3/4" x 7/16" Stainless Steel DIN ISO 606 - Chains and Sprockets
Simple Sprockets 3/4" x 7/16" Stainless Steel DIN ISO 606 - Chains and Sprockets
Sprockets with a hub on one side for roller chains according to DIN ISO 606. The sprockets have a centering point or are pre-drilled (this may vary de...
FR-10280 Fontaines Les Gres
Connecting links duplex din iso 606 - Chains and sprockets
Connecting links duplex din iso 606 - Chains and sprockets
Connecting links for DIN ISO 606 duplex roller chains. By Form E, the spring clip must be mounted with the closed end facing the direction of movemen...
FR-10280 Fontaines Les Gres
Round stainless steel racks, straight milled teeth, angle of - Straight gears Racks Bevel gears
Round stainless steel racks, straight milled teeth, angle of - Straight gears Racks Bevel gears
Milled gear, straight engagement. Pressure angle 20°, polished. Outer diameter stretched tolerance h9. The racks are milled on the tooth side. This re...
FR-10280 Fontaines Les Gres
Steel bevel gear, ratio 1:1 Straight cut teeth - Straight gears Rack Bevel gears
Steel bevel gear, ratio 1:1 Straight cut teeth - Straight gears Rack Bevel gears
Milled gear, straight engagement. Pressure angle 20°, natural. Axial angle = 90° The bevel gears are supplied individually. To obtain a bevel gear, pl...
FR-10280 Fontaines Les Gres
Sprockets single 1 1/4" x 3/4" din iso 606 - Chains and sprockets
Sprockets single 1 1/4" x 3/4" din iso 606 - Chains and sprockets
Steel C45. Grey cast iron GG22 from 38 teeth. Sprockets with hub one side for DIN ISO 606 roller chains. The sprockets have a centre bore or are predr...
FR-10280 Fontaines Les Gres
Clamping elements stainless steel - Chains and sprockets
Clamping elements stainless steel - Chains and sprockets
Housing 1.4308 stainless steel, from size 5 1.4301. Clamping arm 1.4301 stainless steel. Buffer natural rubber. Screw stainless steel A2. Version Hous...
FR-10280 Fontaines Les Gres
D-Shape Stainless Steel Clamping Sets - Shaft-Hub Clamping Sets
D-Shape Stainless Steel Clamping Sets - Shaft-Hub Clamping Sets
Stainless steel clamping ring 1.4057. Stainless steel clamping screw 1.4301. For applications requiring a compact design and low assembly pressure. Th...
FR-10280 Fontaines Les Gres
Steel Chain Tensioner Kits - Chain Tensioner
Steel Chain Tensioner Kits - Chain Tensioner
Chain tensioners are primarily used in the construction of machines and installations. They allow for the tightening of round parts, large or very lar...
FR-10280 Fontaines Les Gres
Clamping Elements in Stainless Steel - Chains and Sprockets
Clamping Elements in Stainless Steel - Chains and Sprockets
Body made of Inox 1.4308 starting from size 5 in 1.4301, clamping arm in Inox 1.4301. Elastic body made of natural rubber. Screws in Inox A2. Natural ...
FR-10280 Fontaines Les Gres
Sprockets single 3/8" x 7/32" din iso 606 ready to install - Chains and sprockets
Sprockets single 3/8" x 7/32" din iso 606 ready to install - Chains and sprockets
Ready to install sprockets with hub on one side for DIN ISO 606 roller chains. Teeth are milled and inductively hardened. Keyway acc. to DIN 6885 / BS...
FR-10280 Fontaines Les Gres
Double Row Steel Axial Ball Bearing with Flange - Bearings
Double Row Steel Axial Ball Bearing with Flange - Bearings
Steel body. Nitrile rubber seal. High-precision preloaded bearings with a 60° support angle. The bearings can accommodate both radial and axial forces...
FR-10280 Fontaines Les Gres
Stainless Steel Self-Locking Pin Lifting Ring - Fixed and Swiveling Lifting Rings, Self-Locking Pin Rings
Stainless Steel Self-Locking Pin Lifting Ring - Fixed and Swiveling Lifting Rings, Self-Locking Pin Rings
Equipped with a movable shackle, the pin lifting rings are a quick and easy lifting tool. Pressing the push button allows the balls to unlock. When th...
FR-10280 Fontaines Les Gres
Chain Link Kits - Chains and Sprockets
Chain Link Kits - Chains and Sprockets
Smooth Vesconite® plastic. Steel screw and nut. ISO 4017 screw, strength class 8.8, galvanized. ISO 4035 nut, strength class 8, galvanized. For tighte...
FR-10280 Fontaines Les Gres
Simple discs 1 1/2" x 1" DIN ISO 606 - Chains and sprockets
Simple discs 1 1/2" x 1" DIN ISO 606 - Chains and sprockets
Sprockets for roller chains according to DIN ISO 606. Ball bearings have a centering point or are pre-drilled (this may vary depending on the manufact...
FR-10280 Fontaines Les Gres
Self-locking pin lifting ring in stainless steel - Fixed and swivel lifting rings, self-locking pin rings
Self-locking pin lifting ring in stainless steel - Fixed and swivel lifting rings, self-locking pin rings
Ball pin lifting ring, easy and quick to use with a swivel shackle. The balls can be released by pressing the push button. If the push button is relea...
FR-10280 Fontaines Les Gres

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play