Plastic bevel gears, ratio 1:1.5 treated by - Straight gears Rack Bevel gears
Plastic bevel gears, ratio 1:1.5 treated by - Straight gears Rack Bevel gears

Plastic bevel gears, ratio 1:1.5 treated by - Straight gears Rack Bevel gears

Spray-treated, straight tooth. Pressure angle 20°. Axial angle = 90°. Bore starting from module 1.5, machined. White polyacetal. Ivory polycétone. Polyacetal standard material with high hardness and reduced friction coefficient. Polycétone material with a significantly longer lifespan, higher power transmission, and better safety against tooth breakage due to its extremely high wear resistance and very good tribological properties. Usable underwater and in other fluids. The spray-treated gears may have internal shrinkage due to manufacturing. These may become visible during drilling or in the presence of grooves. Their operation is not affected. The bevel gears are supplied individually. To obtain a pair of bevel gears, please also order the indicated opposing wheel. Reference: 22432 Material: Polyacetal (POM) or polycétone (PK) Temperature range: -40 °C to +140 °C (depending on the value and duration of the load)
Similar products
1/15
Steel bevel gear, ratio 1:1 Straight cut teeth - Straight gears Rack Bevel gears
Steel bevel gear, ratio 1:1 Straight cut teeth - Straight gears Rack Bevel gears
Milled gear, straight engagement. Pressure angle 20°, natural. Axial angle = 90° The bevel gears are supplied individually. To obtain a bevel gear, pl...
FR-10280 Fontaines Les Gres
Gear racks plastic injection moulded straight teeth - Gears / Gear Racks / Bevel Gears
Gear racks plastic injection moulded straight teeth - Gears / Gear Racks / Bevel Gears
Injection moulded, straight teeth. Engagement angle 20°. Polyacetal, white. Polyketone, ivory tone. Note Polyacetal Standard material with high hardne...
FR-10280 Fontaines Les Gres
Steel Gear, Module 3, Straight Cut Tooth, Angle of - Straight Gears, Racks, Bevel Gears
Steel Gear, Module 3, Straight Cut Tooth, Angle of - Straight Gears, Racks, Bevel Gears
Milled denture, straight engagement. Pressure angle 20°, natural. Up to 48 teeth with hub, from 50 teeth without hub. Reference: 22400 Material: Stee...
FR-10280 Fontaines Les Gres
Round stainless steel racks, straight milled teeth, angle of - Straight gears Racks Bevel gears
Round stainless steel racks, straight milled teeth, angle of - Straight gears Racks Bevel gears
Milled gear, straight engagement. Pressure angle 20°, polished. Outer diameter stretched tolerance h9. The racks are milled on the tooth side. This re...
FR-10280 Fontaines Les Gres
Right-threaded worm gears with a 17 mm center distance - Worm screws and worm wheels
Right-threaded worm gears with a 17 mm center distance - Worm screws and worm wheels
Endless steel screw. Helical gear CuZn37Mn3Al2PbSiS40. Endless screw with right-hand pitch, hardened HV 620 – 700, flanks and drilling ground. The gea...
FR-10280 Fontaines Les Gres
Toothed belt pulleys t profile - Toothed belt pulleys Splined shaft Timing belts
Toothed belt pulleys t profile - Toothed belt pulleys Splined shaft Timing belts
Aluminium. Rim flanges, steel. Version Aluminium bright. Steel electro zincplated. Note Standard T profile acc. to DIN 7721 T2 with metric pitch (trap...
FR-10280 Fontaines Les Gres
T-profile Timing Belt - Sprockets - Tooth Bars - Timing Belts
T-profile Timing Belt - Sprockets - Tooth Bars - Timing Belts
Endless toothed belt with a trapezoidal profile according to standard DIN 7721 T1 with a metric pitch. Ideal for drive systems requiring high belt fle...
FR-10280 Fontaines Les Gres
HTD 8M Sprockets for mounting with stop flanges - Sprockets with toothed bars and toothed belts
HTD 8M Sprockets for mounting with stop flanges - Sprockets with toothed bars and toothed belts
HTD standard profile with a metric division (semi-circular tooth). At least one gear must have guiding flanges. Tapered hole for Taper stop flanges. T...
FR-10280 Fontaines Les Gres
Clamping levers plastic with male thread and clamping force - Clamping and tension levers
Clamping levers plastic with male thread and clamping force - Clamping and tension levers
By using clamping levers with integrated clamping force intensifier, the clamping force can be increased by up to 75% compared to standard clamping le...
FR-10280 Fontaines Les Gres
Swivel feet plates die-cast zinc or stainless steel - Levelling feet, swivel feet, machine feet
Swivel feet plates die-cast zinc or stainless steel - Levelling feet, swivel feet, machine feet
Plate die-cast zinc or stainless steel 1.4305. Anti-slip plate thermoplastic elastomer. Version: Die-cast zinc plate, black powder-coated. Stainless s...
FR-10280 Fontaines Les Gres
Sprockets single 3/8" x 7/32" din iso 606 ready to install - Chains and sprockets
Sprockets single 3/8" x 7/32" din iso 606 ready to install - Chains and sprockets
Ready to install sprockets with hub on one side for DIN ISO 606 roller chains. Teeth are milled and inductively hardened. Keyway acc. to DIN 6885 / BS...
FR-10280 Fontaines Les Gres
3-Jaw Stationary Steel Chucks
3-Jaw Stationary Steel Chucks
Three-jaw stationary chucks are particularly suited for centered clamping of workpieces on drills and milling machines. The flexible arrangement of ha...
FR-10280 Fontaines Les Gres
Sprockets single 1 1/4" x 3/4" din iso 606 - Chains and sprockets
Sprockets single 1 1/4" x 3/4" din iso 606 - Chains and sprockets
Steel C45. Grey cast iron GG22 from 38 teeth. Sprockets with hub one side for DIN ISO 606 roller chains. The sprockets have a centre bore or are predr...
FR-10280 Fontaines Les Gres
Ceramic dowel pins similar to din 6325 - Parallel blocks, T-slot nuts, cylindrical pins
Ceramic dowel pins similar to din 6325 - Parallel blocks, T-slot nuts, cylindrical pins
The dimensions of the dowel pin comply with DIN 6325. Advantages: Ideal for fixture construction Dimensionally stable even at high temperatures Electr...
FR-10280 Fontaines Les Gres
Threaded indexable plastic handle - blue passivated zinc-plated steel parts
Threaded indexable plastic handle - blue passivated zinc-plated steel parts
The indexable plastic handle, featuring an ergonomic design, presents a modern and high-quality appearance, combined with a very pleasant grip. Its ha...
FR-10280 Fontaines Les Gres

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play