water sprayers

...silicone, polyester, etc.) in paint and spray booths. Advantages of this filter: - Lifespan up to 6 times longer than other media available on the market - Easy installation and simple, risk-free handling - Eco-friendly product in accordance with ISO 14000 - Works well with both solvent-based and water-based paints (also known as hydro) Filter suitable for any horizontal or vertical airflow booth.

... lubricants may come into contact with food. It should be noted that dynamic stability (ndm factor) significantly decreases with water exposure and simultaneously higher temperatures. ELKALUB GLS 380/N1 is not resistant to acids and alkalis and should not be mixed with other greases. This is a special product that can be individually produced for you upon request. Minimum order quantities may apply. Just contact us.

... exhaust fans while the unused wet paint is held by water. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.

... application of misting systems for your crops: The micro-droplets of water dispersed by misting systems enhance the production and yield of your crops by creating a specific and controlled microclimate. Unlike a traditional irrigation system, high-pressure misting ensures better water management while providing the necessary humidity for the proper development of crops. This is made possible by hygrometric sensors that will trigger the misting when humidity levels are too low.

... high. Supplied with 3 different spray nozzles that are equipped with a quick coupling. They fit both on the lance as directly on the gun. The backpack model with a 15 L tank capacity ensures ergonomic ease of use. The backpack sprayer is fully mobile: no water supply, electricity or air pressure are needed and it has a range of up to 8 m. Content of the tank:30 L on trolley, 15 L backpack Weight:11 kg on trolley, 4,5 kg backpack Pressure:1,5 - 6 bar on trolley, 1,5 - 4,5 bar backpack Water flow:3,5 L/min on trolley, 1,8 L/min backpack Packaging:Individually packed...

... Alumina Aluminum AL2O3 Ceramic Water valve plate Aluminum Oxide Ceramic is wildely used in many fields including mechanical, electronics, electrical,automotive, semiconductor, textile, etc. For the good propertities, more and more customers choose Alumina ceramic materials for their applications. Alumina Ceramic can be made to Ceramic Nozzles, Ceramic Sprayers Cyclones, Ceramic Linings...

YOU AS A CUSTOMER AND YOUR NEEDS ARE AT THE CENTER OF OUR ACTIONS The Lindner companies stand for innovative plastic packaging produced using extrusion blow molding and injection molding processes. We have many years of experience and a wide range of products, from PE and PET bottles to spray heads, atomizers, dispensing pumps, and pressure sprayers, as well as screw caps. In our printing facili...

...Nebulizer systems, equipped with high pressure pumps and continuous duty electric motors. Polyethylene tank with capacity for 120 liters Electric water level sensor. Pressure regulating valve. Manometers for pressure control. Antipulsation accumulator. ByPass for returning water to the tank.

... upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the...

... types of wax and fungicides. Application of water for dust binding. How and where should a MAFEX be assembled? Mounting of the atomisers for use with potatoes, for example, can be made on de-earthers, box fillers or conveyor belts, with preferred positioning above a step-down drop. With fruits, atomisers can be mounted above the sorting table for example. For MAFEX sprayers with 1 or maximum 2 atomisers there are also mobile supporting stands available. Advantages optimum dispersion of active ingredient uniform allround-wetting of the potatoes or fruits reduction of required quantity of agent...

...Cleans larger diameters faster, using less water Speed-regulated rotation with magnetic brake Adjustable speed through inserts Fresh or recycled water, no maintenance 45 to 90 liters per minute up to 200 bar Usable in 90˚ bends Can be used with or without pre-spray High performance with interchangeable ceramic inserts 1/2": 3/4" 8550-0000: 8555-0000F with pre-spray Ø65 x L92mm: Ø65 x L96mm...

...The use of misting systems for air condensers is an effective way to reduce energy consumption and improve cooling efficiency in industrial air conditioning systems. Indeed, by using misting to cool the air, misting systems help lower the condensation air temperature and promote the condensation of water vapor contained in the air, thereby reducing energy consumption.

... manufactured from WRAS approved polymer for the storage of drinking water (black, boat blue or natural coloured tanks only). These can be used as sprayer tanks or water bowsers for agricultural sprayers with a range of sprayer camlock fittings available to suit your sprayer. The optional Ball Baffle System guarantees fluid stability for safer operation, reducing fuel usage and mechanical wear & tear.

...During the glazing phase, the air, laden with ceramic paint residues, is drawn in from the rear and passes through a system of cascades and water curtains; it then flows through a series of labyrinth-type plastic droplet separators and is drawn in by the fan to be expelled outside through the exhaust stack. The fan, capable of ensuring the necessary flow and pressure characteristics, is of the centrifugal type mounted on anti-vibration joints.

...Refresh large spaces with a fine mist of water propelled into the air by the fan. Water tank and inlet at the back, control panel at the front. Remote control included. Adjustable, directional, and movable thanks to its wheels. Economical water recovery system. An ideal product for cooling off outdoors (terrace, garden, public place, etc.).

...NPK fertilizers in aqueous format (suspension) which facilitate and simplify handling since they only require dose regulation, mixing the product with water and they can be applied through sprayers or via the irrigation system.

...SybotX offers a range of services related to robotic spraying. The painting process requires expertise in both robotics and painting techniques. Our services enable us to assist you in integrating new production lines. Mastered technologies: - Automatic guns: Airspray, Airmix, Airless - Rotary bowls - Mastery of the electrostatic process. Standard Product Applications: - Water-soluble or solvent...

... quality. Operating principle Water is pressurized by jet nozzles, transforming it into a fine mist. A fan located inside the hood then generates an airflow to disperse the mist. The mist clings to dust particles, effectively suppressing dust. Features and benefits - Sturdy chassis In stock: 2 Products Model: S45S Manufacturer: SCREENPOD Warranty: 1 year (Parts and Labor) Required electrical power: 20 kWA...

...Strengthened fiber or polyethylene tank Clean water tank Fast filling system Choke preventive, effective spraying filtration system 5 vane angle turbo fan blower Pressure regulator control handle Hydraulic agitator system High spraying provider fully galvanized fan Bidirectional nodrip nozzles with ceramic plaque 2 speed transmission 2 step regulate axle 80'turning provider wide angle shaft that is secured by a plastic cover ...

...Lechler return nozzles atomize liquids into a fine hollow cone. The atomized flow rate can be distributed to bundle heads with up to six small return nozzles. This results in a total This special single-fluid nozzle operates on the principle of pressure atomization. The water is supplied to the nozzle with an almost constant pre-pressure, regardless of the atomized flow rate. The injection...

... + tin with PP31.5 thread -Spray bottles made of HD-PE and PET -Sprayers / triggers / spray guns 28/400 and 28/410 -Misting bottles -Fine mist sprayers -Dispensers/soap pumps 28/400 and 28/410 -Foamer (foaming system) -Bag-in-Box system "Cheertainer" -Canisters -Poly IBC and TwinDrum barrels -Cans / spice cans made of tinplate -Jugs / bottles made of stoneware -Aluminum closures for food bottles -Various closures/closure systems etc.

...inspection pits, coupling sleeves, tables, chairs, slides, cabinets, isothermal containers, delivery boxes, signaling beacons, waste containers, recycling, distribution boxes, water troughs, tanks for sprayers, septic tanks, lamps, planters, coat racks, trash bins, benches, chemical containers, treatment stations, septic tanks, water ducts, protectors, and machinery covers.

... irrigation systems). - soluMOP® is also very effective as a foliar fertilizer when applied with plant protection sprayers. - soluMOP® can be used in open fields and in protected cultivation (soil and substrate-based crops). - soluMOP® can be applied either alone or in combination with many plant protection products (fill the plant protection sprayer with 1/3 water > soluMOP® > plant protection product). We recommend checking the compatibility with other products beforehand.

...It is an easily adjustable and useful machine. Work efficiency is high. Our warehouses are produced from polyester and polyethylene against the harmful effects of pesticides. The water filter can be cleaned easily.Thanks to the regulator, the pressure can be adjusted according to demand. In this way, spraying can be done at the desired flow rate.It can be easily connected to the tractor with a three-point suspension system. There is an embossed and transparent level indicator on the tank. Spraying arms of standard model sprayers can be removed during loading.

... artistically successful. The removal is often costly and time-consuming, but we can protect the surfaces from further 'embellishments.' If needed, we apply a colorless and breathable protective layer that allows for easy cleaning in the future. This solvent-free protective layer is water-repellent and provides additional weather protection. It is transparent and can be offered in matte, satin, or high-gloss variants.

...The Fast Clean Gear pump, known as "FCG", is a gear pump designed for managing paint flow. Description The FCG pump is intended for supplying solvent-based or water-soluble liquid paints to all SAMES KREMLIN sprayers. It ensures a consistent, precise paint flow proportional to its rotation speed. Precise dosing Compact design "Fast-Clean" technology Performance Quick color changes Consistent...

... system - Hose adapter - Suitable for all conventional water-based chemicals - Uniform coverage - Quiet operation Dimensions 53 x 54 x 82 cm Net weight 45 Kg Weight with packaging 50 Kg Electrical specifications 220v and 110v Length of twin tube hose 5 m Flow rate up to 130 ml/min Power cable length 2 m Droplet size 40 microns Tank capacity 5 l...

...VEGEMAT is an alkaline liquid cleaner. It is designed for the general cleaning of equipment, sprayers, trimmers, straddle carriers, etc. Effective on all types of water-resistant and alkaline-resistant surfaces. VEGEMAT can be used with a high-pressure device, a handheld sprayer, or manually. It deeply cleans trimmers, sprayers, mechanical parts, or any other equipment with stubborn dirt... Approved for food contact, it also allows for the cleaning of walls, tanks, or any other equipment that comes into contact with food products. Dilution rate: 5 to 50%...

... operation and a long-lasting reliability. QES electrical motors assure the full efficiency with lowest power consumption and low noise operation. QES units are the best solution for applications where noise is a matter of disturb. BPS internal drain system avoids to waste water during drain cycles.

...Ruhr cooling tower spray nozzles are corrosion-resistant, easy-to-install, universally applicable spray systems that optimize water distribution in counterflow cooling towers and maximize cooling tower performance through interchangeable nozzle inserts. The spray nozzles consist of fiberglass-reinforced polypropylene nozzle bodies with impact plates, pipe adapters with sealing rings for...