twisted link

...The Singapore Chain combines the look of a link chain with a rope chain, offering a twisted and intricate design. It is a striking piece of jewelry.

...Twisted Chain Material:Steel, Aluminium, Stainless Steel Surface:Nickele, chrome, colours...

... difference between driver and receiver. LVDS can tolerate at least ±1 V ground difference. High immunity to induced noise because of differential signalling normally using twisted-pair cable. Low EMI because small equal and opposite currents create small electromagnetic fields which tend to cancel one another out. Not dependent upon particular device supply voltages. Simple 100 Ohms termination at receiver. Power consumption is typically 50 mW per driver receiver pair for LVDS compared to 120 mW for ECL or PECL. ...

...Spring steel wire with two twisted eyes - Quick-Link wire Wire thickness 2.85 mm Wire length 3660 mm Tensile strength 1,650 - 1,850 N/mm² We supply Quick-Link's best quality directly from our warehouse. Please inquire about your needs with us - we will provide you with an interesting offer. Various designs available.

...These types of chains are generally formed by the use of DIN 8187, DIN 8188 and DIN 8181 standard chains. According to the usage areas and purposes, it is obtained from U-twisted (bridge) metak sheet which is located in the outer link area. Rubber cladding is done on U-Twist (bridge) profiles according to customer requirements and working conditions within the range of 50-80 SHORE hardness.

... connections. They offer an extended bandwidth of 250MHz, supporting a data rate of 1 Gbps (up to a maximum of 10 Gbps **). These are standard Ethernet cords made of 4 pairs of 100% copper conductors. The pairs are twisted and covered with a general shield to combine transmission quality and protection against electromagnetic interference. EAN:ALLCOR60FU030GRZ...

... external delay and making adjustments and corrections to TX and RX timing paths • RGMII with 3.3V/2.5V/1.8V tolerant I/Os • Auto-negotiation to automatically select the highest link up speed (10/100/1000Mbps) and duplex (half/full) • On-chip termination resistors for the differential pairs • On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate...

... copper wire Ø 0.6 mm Insulating sleeve:ON Aderfarben:SW/BL, WS/OR, VI/GN, RT/BR, GE/GR Verseilung:2 cores each in pairs, pairs twisted to form a cable core Mantel:FRNC jacket, white Conductor diameter:0,6 mm Conductor resistance:≤67,9 Ω / km Insulation resistance:≥1,5 GΩkm Operating capacity (at f = 800Hz):≤70 nF / km Capacitive coupling (at f = 800Hz):≤400 pF/500m Ader / Ader:2500 V/DC 5min Bending radius:> 10x outer diameter laying:-5 to +50 °C business:up to +70 °C...

... + 128 (backplane + Ethernet) Current draw 1 A @ 5.1V DC, 3 mA @ 24V DC Ethernet cable 802.3 compliant shielded or unshielded twisted pair Wiring category 2 - on Ethernet ports, 3 - on USB ports Communication rate 10/100 Mbps Connections supported, max TCP: 128, CIP: 256 (CIP connections can be used for all explicit or all implicit applications. for example, a 1756-ENBT module has a total of 128...