synthetic lubricant

...Synplus ACEA C1 5W/30 is a superior full synthetic engine oil designed with low SAPS (Sulphated Ash, Phosphorus, and Sulphur) properties, making it ideal for high-performance applications. This advanced lubricant represents the pinnacle of oil formulation and additive technology, providing the highest level of engine protection while enhancing fuel efficiency in contemporary low-friction petrol...

...LUBCORK BV is a solvent-free surface treatment for the lubrication of synthetic corks. It acts as a hydrophobic lubricant. Very easy to use and safe due to the absence of solvents, this product allows for the immediate use of corks after treatment. Stability of extraction forces over time.

... automatic lubrication system to locations to be lubricated. Spray OKS 3541 on evenly. Allow excess to drip off and wait for lubricant to penetrate Operating temperature:-10 °C → +250 °C Density (20 °C):0.91 g/ml Viscosity (40 °C):4,000 mm²/s Four-ball test rig (welding load):2,200 N...

BESER KİMYA, as a company engaged in the production and service of specialty chemicals, manufactures lubricating additives (mineral oil additives), metalworking fluids, custom emulsifier packages, starch adhesive rheology modifiers, automotive chemicals, mineral oil and silicone oil emulsifiers, silicone and non-silicone mineral oil foam cutters, oleochemicals, textile process oils and additives, ...

...ELKALUB FLC 400 is a fully synthetic specialty spray for lubricating metal parts in high-temperature environments up to +250 °C, and temporarily up to +300 °C. ELKALUB FLC 400 forms a very thin, highly durable film. No residues remain that could impair lubrication. Caution: A flawless adhesion of the lubricant film to the metal surface is only guaranteed after thorough cleaning of oil, grease, and contaminants.

...Fullmax TF-B 0W-30, is a synthetic engine oil that meets the Euro 6 emission standards of gasoline engines of passenger cars and commercial vhicles. It is specially developed for FIAT low emission gasoline engines. Its special formula provides good cold starting, lower oil consumption, minimized exhaust emmisions and fuel economy. ...

... in all types of transmissions. Coolant Protection Fluids: Coolant antifreeze ensures long-lasting cooling performance in all cooling systems and protects against corrosion in the cooling circuit. Multi-Purpose Oils (UTTO): Base oils and state-of-the-art additives ensure excellent wear protection and high stability under shear loads, as well as good responsiveness of the hydraulic system even at low ambient temperatures. Greases: We also offer synthetic high-performance greases as well as soap-free and metal soap greases of various NLGI classes.

... against corrosion Non-toxic Loosens dirt Loosens rust Chemical-resistant Does not resinify Separates Withstands high pressure High penetrating properties CFC- and silicone-free Fields of application PL 200 is suitable for all common materials, e.g. metal, wood, rubber and almost all synthetics. It’s also suitable for almost all synthetic combinations in gear boxes, bearings, chains, screw connections, switches, channels, locks, etc. PL 200 can be used freely in the food sector. Usage Always shake well before use! Check plastic parts beforehand for compatibility, then just spray on, using...

...For frequent use, made from synthetic raw materials. * to be diluted in water, biostable and with a mild scent * extends the lifespan of the tool * non-toxic risk, water pollutant level 1 ZHB001 - 1-liter box Concentrated cooling lubricant...

...This is a synthetic motor oil designed to meet the lubrication requirements of gasoline and diesel engines, formulated with a new generation of high-performance additives and base oils. 10w-40 is designed to meet the needs for extending engine life and wear protection. It meets the requirements of automotive manufacturers with its semi-synthetic technology and superior formulation. Features and...

...{"SPECIFICATIONS":"• API GL-5.\n• ZF TE-ML 05A, 16B, 17B, 19B\n• MIL-L-2105D\n","APPLICATION":"• Final reductions and highly demanded manual transmissions for cars, vans, trucks, buses, agricultural and construction machinery...\n","RECOMMENDATION":"• Recommended as a lubricant for transmissions when one of the following specifications is required:\n","ADVANTAGES":"• Possibility to extend oil...

... Cellulose Fiber) delivers higher targeted efficiencies, longer service life, wide chemical and synthetic lubricant compatibility even at extreme working temperatures.Mikropor assures that the replacement elements perform equal to or better than the original elements. Replacement elements have been designed and tested in ourstate-of-the-art test laboratories. ...

...Replacement product ARAL SAROL 474 EP Semi-synthetic water-miscible premium cooling lubricant Description Castrol Alusol™ ABF 10 is a boron, amine, formaldehyde releaser and chlorine-free, semi-synthetic water-miscible high-performance cooling lubricant. It contains a unique additive package that improves machine performance and surface quality, ensures excellent stability and bioresistance and...

...Synthetic steel forging lubricant (graphite-free) Properties and Advantages • free from graphite • no smell emission during forging process caused by released organic propellants • good lubricating- and release properties • suitable for complex forgings • improved cleanliness of work environment • normally no problems occur in downstream processes...

...Synthetic EP long-term grease with solid lubricant and special additives. Suitable for use in plain bearings, bearing bushes, open gears and guides, machine tools, vehicles, CNC machining machines, clamping devices, crane vehicles, forestry and construction machinery under humid operating conditions. Highly adhesive, particularly resistant to water and seawater, suitable for road service vehicles...

...fits, and sliding surfaces • Long-lasting corrosion protection • Good lubrication effect even at low temperatures • Displaces water • Leaves a fine protective film after the solvents evaporate • Neutral to plastics, rubber, or paints • Corrosion protection and synthetic oil are biodegradable Areas of application For disassembling rusted and burnt-on parts and for loosening screws and bearings. For protection against corrosion and moisture, with long-lasting effects. Also lubricates fine mechanisms down to deep... Container: IBC Country of origin: Germany Content: 1000 liters...

...Type 220 is a fully synthetic lubricant with high temperature resistance in both low and high ranges. It does not coke or resinify at high temperatures. It evaporates extremely slowly and without residue even at elevated temperatures. At low temperatures, it remains fluid. It has excellent creeping properties, allowing it to reach critical areas with tight tolerances, such as the inner bearings...

...The 10W40 product is a high-quality synthetic multigrade lubricant blended with base oil, isomerized through a severe hydrogenation process and selected additives. The high-quality base oil and the additives used ensure that the product provides excellent service performance in gasoline or diesel engines, whether naturally aspirated or turbocharged, in cars and vans. High stability synthetic multigrade lubricant with very good anti-wear and anti-corrosive properties. Long-lasting lubricant due to its low volatility. API: SM/CF...

... strain:-40 up to +130 °C Material identification:D-438 / D-439 / D-440 Fiber:Synthetic / Cotton / Synthetic Resin:Polyester / Phenol / Phenol Friction value in oil:0,08 to 0,11 / 0,07 to 0,11 / 0,09 to 0,12 Friction value dry:0,14 to 0,18 / 0,15 to 0,30 / 0,20 to 0,40 Additives:PTFE / MoS2 / - Colour:Turquoise / Grey / Red-Brown...

...Fully synthetic lubricant oil, standard packaging 300 ml pump spray, 400 ml spray can, 1 l bottle, 10 l canister, 20 l canister, 60 l barrel The fully synthetic penetrating and fine oil is designed for loosening and lubricating chains, rollers, screw connections, hinges, and joints. Additionally, it is suitable for corrosion protection, stainless steel and plastic care, as well as for cleaning parts contaminated with oil and grease.

...Fully synthetic, adhesive lubricant for open gear drives, toothed wheels, chains, guideways and wire ropes. The highly-viscous and high-pressure resistant oil remains fluid even at low temperatures and leaves no solid residues Lubricant for gear drives:Lubricant for toothed wheels Lubricant for chains:Lubricant for guideway and wire ropes highly viscous:high pressure resistant Remains fluid at low temperature:No solid residues...

...HDDEO 10W-40 PLUS is a synthetic lubricant designed to provide a high level of protection for diesel and turbodiesel engines of modern commercial vehicles. It uses carefully selected unconventional bases, and additives of advanced high-performance technology. This allows to obtain a very high level of protection against engine wear, good fluidity at low temperatures, control of volatility and...

...High-performance, low friction fully synthetic motor oil designed for long-term use in modern motors.The combination of ultimate synthetic oil technology with latest additive generation (mid SAPS technology), guarantees a low viscosity,highlyshear resistant engine oil that is sure to prevent deposit build-up, lower friction loss in the engine and provide optimal wear protection.

...This new generation of anti-stick agent contains a blend of extremely fine, inorganic lubricants in a non-coking, ash-free synthetic carrier. It withstands high temperatures.

...Fully synthetic lubricant with good creep properties and long service life. Neoglis, along with Neoglis Plus and Neolub, forms the Neo range, which is based on synthetic oils and is tailored to various applications with different viscosities, adhesion properties, and creep capabilities. All Neo products are odorless, do not harden, are non-reactive with plastics, and displace moisture. The Neo film provides temporary corrosion protection and can be removed without residue at any time using Solvo-Spray. Neoglis is the all-rounder of the Neo range.

TEXAPEL is a family-owned company that has been committed to its customers, leather quality, and sustainability for 80 years, providing chemical solutions to the leather industry worldwide. Our catalog includes retanning agents, degreasers, fatliquors, and special auxiliaries. We are passionate about serving our customers because their success is our success, and we ensure that we meet their highe...

SKS is a 100% Greek company that produces mineral oils and greases. Established in 1981, it has grown steadily with a second generation of entrepreneurs carrying the torch to this day. SKS utilizes its long experience, continuously analyzes and assesses market needs, uses state-of-the-art technology, creates new products that fully meet European standards and are characterized by their high qualit...

...Carbonized synthetic fiber with PTFE impregnation and run in lubricant Practical useful application data: max. temperature: +140 °C Characteristics Good flexibility Rot proof Form stable packing Good value for the money Recommended surface hardness HRC50 Operating range Pressure [p max]: 15 bar, Velocity [v max]: 15 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar...

...It is a state-of-the-art synthetic lubricant for cars, and its formulation along with the use of carefully selected raw materials ensures exceptional performance in modern gasoline and diesel engines, both naturally aspirated and turbocharged, even under demanding conditions.