stock radial

...maintenance-free and predictable service life iglidur® JVFM/JVFI Special features Standard product range from stock radially and axially pre-tensioned plain bearings Completely free of clearance in unloaded state Material: iglidur® J Maintenance-free and calculable service life When to use it? When a radial and/or axial pretension of bearings is desired When a derattling of the bearing in the...

...Stock conveyors can be produced as radial type according to the location of the facility, land conditions and customer demand. The Belt Conveyor chassis is connected to the ground from the tail module with a fixed joint. High-strength steel construction feet made to support the weight of the intermediate modules and the drive module are attached to the axle located on the wheels. These wheels are...

...This standard tank from our stock has been equipped with an electric 16 kW tracing system to raise a product from 15 °C to 80 °C in 2.5 hours. Insulation and a bolted decorative plate have been added around the tracing. We can also offer welded decorative plates. A 4 kW agitator has also been installed on the tank, featuring an axial/radial Alabnet impeller and a halbanker in combination with 3 x deflector plates.

...Shaft seals made of NBR, Viton, all standard sizes available from stock • Custom manufacturing of shaft seals (also according to sample) • Piston seals, scrapers, guide rings, roof seals • Production also in various materials: PU, PTFE, Viton, NBR • Special dimensions...

... /L10) at 40 °C. The PWM input in combination with the tacho output enables the speed to be controlled and monitored. It is not obvious at first glance, but the Model HY45AB05PNK00A tops with a pressure of 143 Pa. The new models will be included in the standard range and will therefore be available shortly from stock. SEPA EUROPE specializes in customized cooling solutions. Thanks to over 25 years of experience, SEPA EUROPE can offer you the appropriate solution for virtually every task. ...

...4" submersible pump for drilling (DN100 mm), with an outer sleeve made of AISI 304 stainless steel and stages in noryl. Threaded outlet. Check valve integrated into the discharge body. Continuous service with submerged motor and adequate cooling (minimum 0.08 m/s) Model: 4SM In stock: 2 Products Maximum water temperature: +35°C Maximum sand quantity in water: 100 g/m3...

...Manufacturing of rotary connections for various purposes including pitch and azimuth bearings for wind turbines, lightly preloaded (no axial and radial play) REFERENCES SHIPYARD ULJANIK PULA (Croatia) ROTIS (Slovenia) ĐĐ SPECIAL VEHICLES (Croatia) KONČAR ENGINEERING (Croatia) HOBAS (Austria)...

...Bilateral fixation arch for positioning the patient seated, adjustable in width for MAQUET operating tables. With fixation for MAQUET head supports and neurosurgical accessories. Attachment to accessory rails via two radial clamping brackets 1003.23-C (to be ordered separately). 4 pieces available in stock at a special price. Please contact us.

... you need from a storage-friendly roll without any waste. Your advantages: • Waste-free consumption – cut only as much as needed • Selection from various standard stock profiles and combination options with plastic fibers or natural bristles • Space-saving storage in stackable boxes or as coils • Inserting, clamping, screwing, riveting, and gluing even in a radius...

...V-rings, labyrinth seals, sliding ring seals, piston seals, rod seals, retaining rings, wipers, guide rings, sealing cords, packs, bellows, laminates, shaft protection and repair sleeves. At first glance, sealing technology may seem unremarkable. Yet, it plays a crucial role in all technical applications. BEARING SERVICE provides a wide range of products in all brands, designs, and materials. The most common designs and sizes of radial shaft seals and O-rings are available for immediate delivery from stock at BEARING SERVICE.

...On our lathes, we manufacture parts up to 65 mm in diameter from bar stock. For inserted parts, machining up to 500 mm in diameter is possible. Four-axis CNC lathe with powerful main and counter spindle. Highest thermal stability, machining accuracy, and rapid feed speed. Very stable Y-axis with a large travel range. High-precision C-axis. Driven tools. 12-fold VDI25 radial turret with single-motor technology. Max. Diameter: 300 mm. Max. Length: 480 mm. Max. Bar Diameter: 51 mm.

... mills, no tool change is required anymore (only one tool station occupied), as the complete outer contour is machined with just one tool. The machining is burr-free, as the profiles are laid out overlapping. Additionally, bar material can be completely profiled (no expensive stamping tool needed anymore). Our proprietary manufacturing process allows us to provide even the most complex profile shapes with logarithmic relief! Normally, profile shapes are relieved in a radial direction. For unilateral profile shapes, we can, upon request...

... 8,000 Nm - Connectors for gerotor motors - Piston motors (constant / adjustable / open / closed) - Radial piston motors with planetary gear - Electric motors from 0.55kW to 22kW with B14A, B35 & B5 flange available from stock...

...Assessment and Diagnosis Cleaning and Test Runs of Injectors and Pumps Technical Consultation and Assessment Testing, Repair, and Replacement (Passenger Cars/Commercial Vehicles/Industry) Denso Distributor, Inline, ECD, Radial Piston, and Common Rail Pumps (HP0, HP2, HP3, HP4), Repair and Replacement, available from stock for Toyota, Nissan, Mazda, and Subaru Nozzle Holders 1 and 2, Spring...

...ITEM NO CODE DESCRIPTION SIZE QUANTITY 1 5502 Pin Ø34 x 80 mm 1 2 5507 Pin Ø36 x 145 mm 1 3 5514 Bolt M16 x 1.5 x 87 mm 1 4 5518 Bolt M16 x 1.5 x 150 mm 1 5 5521 Bronze Bushing Ø40 x Ø36 x 82 mm 1 6 5525 Rubber Bushing 1 7 5531 Red Powder Rubber 1 8 5532 Black Powder Rubber 1 9 5551 Teflon Ring 1 10 5552 Clamp 1 STOCK CODE: KN-50.000.02 CATEGORIES: KNORR, SB5 TYPE, SB6/SB7 TYPE, SB7 RADIAL...

... continuous cooling of electric motors. These units consist of a special axial external fan drive, which is integrated into an external fan cover for protection against damage. In addition to our standard range of external fan units, which are available from stock, we supply units for original equipment as well as retrofitting for all electric motor manufacturers on the market. Furthermore, we supply centrifugal fans/radial fans from 50m³/h to 68000m³/h with direct drive and belt drive for media temperatures up to 200°C, as well as fans in stainless steel and special designs.

... machines. World brands primarily for metalworking professionals, manufacturers, and large enterprises. High-quality selection online, helpful customer service, fast parts supply during and beyond the warranty period. Reliable service background with flexible and quick administration. Huge stock inventory, fast delivery across the entire country.

... preparation - Manual assembly, including at assembly tables with light pointers - Processing of radial and axial components Testing: - Programming of circuits - Functional testing Additional: - Assembly work of electronic components - Cable assembly - Wiring and cabling - Packaging and shipping - Special requests upon consultation...

... tyre repair materials in South America with Headquarters in Buenos Aires, Argentina. We supply to more than 20 countries across South, Central and North America, Europe and Asia. Our range of products include radial repair units for chemical and heat cure, compounds, cements and accessories for the Tyre Repair and Retreading Industry. We also have broad experience in manufacturing OTR and Earthmover Tyre Repair Materials.