stainless steel pipes

...Kobamet is a trusted partner! Welding stainless steel is a demanding process. Potential deformation and cracking of welds can be a challenge. But not for us! Feel free to contact us! We will make an individual quote for stainless steel welding: sheets, pipes, orifices, tees, stainless elbows, balustrades and much more. We will determine the possibilities and deadline for a one-off or serial...

...The Tampa Poço c/ Mola Hidráulica REBAIXE 25 - AÇO INOX is an innovative solution for covering wells and water reservoirs, providing safety and aesthetics. Made from AISI 304 stainless steel, this cover is designed to withstand external conditions, making it ideal for areas used by pedestrians and cyclists. With a thickness of 3mm, both the cover and the frame are robust and durable, ensuring...

...Suction lances / suction tubes can be delivered in different diameters right from stock. We also can manufacture according to your drawing and/or sketch or sample. material: stainless steel AISI 304 or aluminium AlMgSi 0.5 F22 in all common tube dimension 40.0 / 50.0 and 60.3 mm right from stock special versions can be realised at short notice and for short delivery...

... The ACS and DVGW certifications are only valid for the 304L stainless steel tube. Available diameters: from Ø15 to Ø108 mm Tube length: 6 meters Service pressure: from -0.95 to 16 bar Service temperature: from -20°C to +120°C Delivery mode: Delivered capped at the ends.

...temperature resistant up to 200°C, full passage opening in 2- and 3-piece ball valves. Versatile Use: Suitable for water, air, solar fluids, chlorinated water, various liquids, gases, oil, gasoline, alcohols, solvents, AdBlue, and more. Technical Data: FSA Ball Valve Stainless Steel 316 1" 2-Piece 2-Way Construction: 2-Piece Temperature: -30° to 200° C Thread: G-Thread Pressure: 69.0 bar Kv Value / Cv Value: 72.00 / 84.00 Weight: 532 g Seal: PTFE Switching Cycles: 30,000...

...All connections are welded while avoiding the inclusion of oxygen, and the weld seams are made invisible through careful polishing. The workpieces are processed without stress and distortion, maintaining uniform wall thicknesses. We exclusively work with non-corrosive materials such as V2A and V4A stainless steel, titanium alloys, and aluminum. Our production conditions allow for the manufacture...

...Seamless Cylinder Tubes made of Stainless Steel (HPI) AISI 304 (1.4301), AISI 316Ti (1.4571) - Unique worldwide, Schierle Stahlrohre GmbH & Co. KG offers the possibility of combining the procurement of steel tubes and rods as commercial goods with customized components tailored to customer specifications and drawings for various applications. The product "Seamless Cylinder Tubes made of Stainless...

...Standards: EN 1092-1, DIN 2631-2638, ANSI B16.5 B16.47, BS 4504, JIS B2220 Dimensions: DN15-DN2000, 1/2"-60" Pressure: PN2.5-PN400, 150Lbs-2500Lbs Material: Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex, and others...

... structures, with square or round stainless steel pipes at their base. We are appreciated by our customers for our sturdy, safe and solid stainless steel SKID structures as well as for the professionalism with which we approach each project. If you need safe and sturdy metal structures, don’t hesitate request a quote now and we will get in touch with you!

... to 11,000 mm in length and 1,400 mm in outside diameter. The special machining process enables M.E.G.A. to produce special seamless SMLS pipes as thin as 20mm (depending on the other dimensions) as well as large diameters. Pipes can be manufactured from carbon steel, stainless steel, duplex and superduplex stainless steel, and can be plated with CRA material (typically UNS N06625 or 316L) to ensure corrosion resistance. DSS and SDSS pipes can be produced to be Norsok M650 compliant.

...For the food industry, 2bec GmbH offers pipe components that have been specifically developed for use in hygienically sensitive areas. These pipes are made of stainless steel and comply with all relevant food regulations. They are resistant to aggressive cleaning agents and ensure high safety in food production. This guarantees that the products meet the high standards of this industry.

...Oil hoses in inch and dash sizes. With or without stainless steel coating for normal and high temperature applications.

... D - From DN 520 to 800: sector elbows, radius 1.25 D - Option for radius 2 or 3D Materials available: - Galvanized steel - Stainless steel - Electro-galvanized steel + EPOXY paint in your choice of RAL Sheet thicknesses: - 8/10 mm for DN 80 to 400 mm - 10/10 mm for DN 420 to 800 mm Possibility to reinforce elbows with 12, 15, and 20/10 mm depending on diameters and specifications. Brand: Aspir'elec...

...Do you need a pipe with special dimensions, a flawless surface, or tight tolerances? Then you are exactly right with us. With an outer diameter ranging from 1 to 40 mm and lengths from 1 to 6000 mm (longer lengths available upon request), we supply pipes and pipe fittings in a variety of alloys. Whether it's ground pipes, specific roughness values, surface finishing, or further processing such as bending, expanding, tapering, flanging, or beading - all of this is part of our offering.

...Cold drawn precision tubes in stainless steel for hydraulic cylinders - Cold drawn seamless precision tubes for hydraulic cylinders in accordance with standard EN10305-1 Stainless steel AISI 304/304L and 316/316L Bored/rolled/polished ISO H8 In commercial lengths of 5-10 m or cut to size Commercial lengths: 5-10 m...

... neck can be paired with our series 60 F niches, our ALU and ASM.CF threaded caps, or our 2" threaded mechanical level indicator cap. The 2" threaded loading system can be used in various sectors, including marine applications and corrosive environments, for which we recommend the stainless steel versions.

...When it gets a bit bigger: The production of large stainless steel pipes and stainless steel constructions made from rolled / rounded sheet metal is also not a problem for us. Get in touch with us and share your ideas. We will tailor everything to your wishes.

...Pre-processed suction roller cover Suction roller covers and decanter pipes for the paper and pulp industry in a pre-processed state made from stainless steel casting.

...Pipes and other connection elements (steel, stainless steel...)...

... industries such as chemical processing, food and beverage, and pharmaceuticals, where hygiene and cleanliness are paramount. Their flexibility allows for easy integration into existing systems, reducing installation time and costs. With a range of sizes and thicknesses available, stainless steel tubes forming in coils can be tailored to meet the specific requirements of any project, ensuring superior performance and reliability.

...Stainless Steel Profiles & Pipes Profiles hot rolled ∙ drawn Welded pipes ∙ seamless Pipe accessories Surface ground ∙ brushed ∙ polished Fixed length service With acceptance test certificate 3.1 Heat resistant Nickel materials...

... corrugated hose typically consists of a corrugated hose, braiding, and connection parts, with each component, especially the connection of the components, having a specific task to fulfill during operation. From DN 6 to DN 300, we guarantee that each stainless steel corrugated hose can be manufactured on short notice – according to your specifications and with the desired connections. Depending on the pressure load, the products can be used for temperatures up to 600 °C.

...According to your construction plans, we cut and bend pipes made of steel, stainless steel, and copper. We can cut from Ø 6 - 24mm and bend from Ø 4 - 25.4mm.

...Load capacity: 125 kN test load EN 124 when completely filled with concrete C35/45 (EN 206-1). Material: In Type BV-RA frame, cover and cross-beam in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. In Type BVE-RA frame, cover and cross-beam made of grade 304 stainless steel (on request also available in grade 316 stainless steel). EPDM seal. Features: Smell proof, largely water...

...Another product group that is used almost daily by metalworkers and locksmiths is push-fit or adhesive fittings. The photo shows a 90° corner made of stainless steel for a pipe with a diameter of Ø 42.4 x 2.0 mm. We stock several variants of stainless steel push fittings for pipes with diameters of Ø 33.7 x 2.0 mm and Ø 42.4 x 2.0 mm.

...Made of stainless steel in various diameters with and without pipes With a short stub for existing pipes. With pipes in various lengths and diameters, with and without insulation. Promotes and regulates draft, acts as a backflow preventer, offers all-weather protection, made from metallic materials that optimally correspond to the respective heating material. Maintenance-free – no moving parts.

...The barrel fitting made of stainless steel has an R 2" steel fine thread on the outside and is suitable for pipes with a diameter of 32 mm.

...With our highly modern 3D plasma cutting equipment, we undertake plasma cuts of spherical bottoms/heads, dished boiler heads, pipes, profiles and metal sheets in material thickness of 1 - 50 mm. Metal sheet change:2,000 x 3,000 mm (2,000 x 6,000 mm) Pipes, profile:diameter 30 - 500 mm / length 3,000 mm (6,000 mm) Heads, cones: up to diameter 2,500 mm Material thickness:1 - 50 mm...

...1) The most commonly used geometry for stainless steel is sheet metal. 2) Thickness: 0.5-50 mm, Width: 1000-2000 mm, Length: 2000-6000 mm. 3) Materials used: Chromium-nickel steels, e.g., 1.4301 (AISI 304), 1.4401 (AISI 316). 4) Applications: Stainless steel is used in the food industry, medical technology, construction, and chemical industry. Based on customer requirements, we offer various dimensions and surface qualities to meet specific technical and aesthetic needs.