shell and tube heat exchangers

... THROUGH THE TUBES, OTHER FLUID FLOWS OUTSIDE THE TUBES BUT INSIDE THE SHELL AS PARALLEL OR ACROSS THE TUBES. SO, HEAT IS TRANSFERRED OVER TUBE SURFACES. IT CAN BE PRODUCED AS COPPER TUBE, BAFON TUBE(CU-NI), STAINLESS STEEL AND STEEL.

...Fully welded plate heat exchangers offer the highest process safety. They combine the advantages of shell-and-tube heat exchangers with those of plate heat exchangers in an innovative way.

... years experience and about 7,500 units have been supplied worldwide between 1965. BORSIG Process Heat Exchanger GmbH has developed two design types of quench coolers, reflecting the customer`s plant concept: 1. "Tunnelflow" transfer line exchangers (shell & tube design) 2. BORSIG "Linear" transfer line exchangers (double-pipe design)...

...Different applications require different designs for optimal performance. Therefore, we supply shell & tube heat exchangers in single tube design with flat, low, and high fin tubes, as well as with compact fin bundles. The flat tube design is most suitable when the media have the same heat transfer properties, while the compact fin design ensures the best possible performance when there is a...

...Finned or bare tube coils for air - gas heating or cooling (heavy duty) Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas...

...Fine Tubes leads the manufacture of precision tubes required in the fabrication of shell and tube heat exchangers. Our heat exchanger tubes are used for the cooling, heating, or re-heating of fluids, gases, or air in a diverse range of industries. Alloys Fine Tubes heat exchanger products are produced as seamless, welded or welded redrawn tubes in the following materials nickel alloys, stainless steels, duplex, super duplex. Please note that we have a minimum order value of £10,000.

...Double tube heat exchangers (also known tube-in-tube) are designed whereby one tube is concentrically positioned within a larger tube. The double tube composition allows for unrestricted flow of product, making it the ideal heat exchanger for viscous products. The product flows through the inner tube and the service fluid flows through the surrounding shell.

...We manufacture water boxes (Channels) for Tube and Shell type heat exchangers in cupronickel, delivered: - raw, - semi-finished, - fully machined according to international quality standards.

...Finned pack or finned tube heat exchangers housed within a casing designed to withstand medium to low pressures. DAV SHELL is suitable for heating, cooling, or dehumidifying gases or compressed air. It can be made from various materials, such as carbon steel, stainless steel, Ni-Cr alloy, or titanium.

...The Barriquand Shell & Twist® heat exchanger is specially designed to address various issues related to fouling, thermal performance, and mechanical fatigue. - Vortex effect that limits fouling at the wall - Improved internal and external heat transfer coefficients - Limited internal fouling of the tubes - Optimized cleaning phases (CIP) - Reduced mechanical fatigue, with the shapes given to the tubes allowing for a "bump-to-bump" contact, resulting in a rigid bundle without baffles and unsupported straight tube lengths.

...We offer all types of heat exchangers: plate and frame, shell and plate, shell and tube, and fin/fan types. They are meticulously cleaned, subjected to pressure tests, and certified as free from contaminants before each use. Capable of handling temperatures from 50 °C to +300 °C, they can also accommodate volatile gases and liquids, high pressures (up to 40 barg), hydrocarbons, seawater...

... 40 bar g), hydrocarbons, seawater, effluents, and brine. With a wide range of auxiliary support equipment, we can connect our system to any design with minimal disruption to the installation. Rental of removable plate heat exchangers for all types of applications We offer a wide range of plate heat exchangers, shell and plate exchangers, multi-tube exchangers, and air coolers. They are thoroughly cleaned and pressure tested before each use, and come with a waste disposal certificate.

...Heat exchangers play a crucial role in the operation of power plant equipment, transferring heat from one fluid to another. We offer a range of heat exchangers designed for different types of power plants and equipment, including: • Shell and tube heat exchangers...

...Exchangers for large hydraulic systems (exchangers up to 500 mm and diameters up to 4,000 mm in length), exchangers for power units, exchangers for ship engines. Shell-and-tube heat exchangers, heat exchangers with different dimensions and technical specifications than those used in standard hydraulic heat exchangers.

... application you can have energy savings up to 15 %.     A bigger construction is the Thermo-Fluid M, which is optimised for utilisation of waste heat from process air, flue gas or exhaust air. An energy yield of up to 1600 kW is possible, whereupon the pressure drop in the process air is less than 1.5 mbar. The pressure drop in water circuit is less than 200 mbar.   This Shell and Tube heat exchanger is low maintance using the small type of construction. The Thermo-Fluid M modular and the standard temperatures are up to 300°C too.    Both Shell and Tube Heat Exchangers are low maintance. One-off or...

...Heat exchangers are mainly used in vacuum distillation systems for cooling and condensation in the absorption and rectification processes in chemical plants. Glass heat exchangers enable visual process control during scale-up and production and processing of multiple (acidic) chemical substances. We offer glass spiral type and shell & tube type heat exchangers. These are often operated in...

... extremely compact. Their ecological footprint can be as little as one-tenth that of a shell-and-tube heat exchanger or half that of a gasketed plate heat exchanger. Additionally, no gaskets or other support materials are required, meaning that 95% of the material is used for heat exchange. Thanks to the highly turbulent flow, even small temperature differences are utilized efficiently. If needed, inquire about CIP cleaning at Arimex PWT-Service GmbH.

...The heat exchangers essentially consist of a shell and a tube bundle. The removable tube bundle can be designed for single or multiple flow paths. Flow rate: 1-1500 m³/h Operating pressure: 10-25 bar Connections: 1¼"-DN 300 Recommended max. temperature difference: 150°C Materials: Steel / Copper / 1.4301 / 1.4401 / Copper-Nickel Tube Bundle Advantages Thanks to the wide selection of materials...

...The UniWeld combines the advantages of conventional shell and tube heat-exchangers with spiral and plate heat-exchangers due to its design and construction. This mixed construction is based on the design of the heat-transfer channels, which are on one side in the tube design and on the other side in a plate heat-exchanger. UniWeld Hybrid exchangers utilise in this way the advantage of tubular...

...The spiral tube heat exchanger essentially consists of a shell and a spiral tube bundle. The tubes are bent in a spiral shape and are installed as a spiral tube bundle within the shell. The heat exchangers are made entirely of stainless steel. Due to the robust fully welded design, pressures of up to 120 bar are permissible. High temperature loads of up to 400°C are possible. High temperature...

...Universally applicable shell and tube heat exchangers in modular design. More than 200 staggered sizes in various materials form the basis for optimal and detailed selection of types. Our universally applicable shell and tube heat exchangers in modular design are primarily used for cooling liquids such as lubricating oil and hydraulic oil or water, as well as for heating using saturated steam. Cooling media can include water, water/glycol mixtures, or seawater. Thanks to a fundamental standardization, we can ensure short delivery times.

... need of it, our policy is based on several strict principles of confidentiality and filing of Proprietary information. Our Customer Service offers a series of specific post-commissioning services, which have been increasing our competitiveness on the market. Read more about our services in our website... https://www.syntechinternational.com...

... Now renting heat exchangers and plate heat exchangers 0800 1818696 We have all types of heat exchangers – frame heat exchangers, plate heat exchangers, shell and tube heat exchangers, and finned heat exchangers. They are refinery-grade, thoroughly cleaned before each use, pressure tested, and certified as contamination-free. Heat exchanger rental from the market leader!

...The shell and tube heat exchangers from N-thalpie GmbH are a commonly used type of heat exchanger employed in various industrial processes to transfer heat between two fluids. They consist of a bundle of tubes arranged within a shell. The operation of a shell and tube heat exchanger is based on the principle of direct heat exchange between the two fluids flowing through the tubes and the shell. One fluid flows through the tubes while the other fluid circulates around the shell.

... transfer efficiency and low fouling. The result... Compact units with small heat transfer areas compared to conventional shell-and-tube heat exchangers. Plate heat exchangers save both material and labor resources, thereby reducing upfront and future operating costs.

...With our decades of experience, we are specialists in the production of counterflow heat exchangers, parallel flow heat exchangers, and coil heat exchangers in various designs. Heat Exchangers ACB manufactures and repairs a wide range of heat exchangers, such as plate heat exchangers, copper coil heat exchangers, evaporators, gas preheaters, shell and tube heat exchangers, U-tube heat exchangers, recuperators, economizers, finned tube heat exchangers, oval tube finned heat exchangers, and much more. You can receive our heat exchangers with rolled or welded tubes.

...Innovations for industry, trade, and private use to optimize economic efficiency and ecology Analysis of existing systems Calculation and design of individual solutions Manufacturing in HP0 certified companies according to European DGRL 97/23/EC, AD 2000 guidelines Shell and tube heat exchangers for process heat, CHP Double pipe heat exchangers for stoves Double pipe heat exchangers for agriculture Air coolers / heaters for drying and preheating...

...Benefit from our years of expertise. We manufacture, deliver, and install high-quality shell-and-tube heat exchangers, fully welded plate heat exchangers, rectangular heat exchangers, pressure vessels, and special equipment in partnership with our partner.

...In a circulation evaporator, the solution to be evaporated circulates in each stage over one or more heating elements, which are usually located outside the evaporator and are designed as shell-and-tube heat exchangers or plate heat exchangers. The circulation occurs either due to thermosiphon effect (natural circulation) or with external influence, i.e., circulation pumps or air circulation (forced circulation). To reduce steam costs, especially with large evaporation capacities, circulation evaporators are also designed in multiple stages.

... exchangers are thoroughly cleaned before we deliver them to you. This ensures that downtime or failures are minimized. We improve your lead times and avoid any bottlenecks. We offer various types of heat exchangers. Some of our heat exchangers include Plate and Frame, Shell and Plate, Shell and Tube, and Fin/Fan heat exchangers (air/liquid). All our equipment is certified before use.