air-cooled

... foundation for the maritime units consists of air-cooled diesel engines, which are certified according to class DNV/GL from the engine factory. Therefore, no further modifications are necessary. Hatz diesel engines comply with the emission standards according to IMO and BinSchUO and can be equipped with the Hatz Silent Pack depending on the requirements for noise emissions.

...Gasoline generator - 5.5 KW / 13 PS air-cooled 1-cylinder OHV 4-stroke petrol engine with 9.56kW / 13PS at 3000rpm * displacement 389cm³ Generator power (continuous / maximum): 5kW / 5.5KW at 400V * Voltage: 230 / 400V * self-exciting synchronous Fuel: unleaded petrol - tank capacity: approx. 25l * running time w. full tank at 2/3 load approx. 7.5-8h Sockets: 1x 400V; 3x 230V; 1x 12V DC voltage * electric start with battery * voltmeter Fuel gauge * including wheels for easier transport * Sound pressure level (Lpa): 73 dB (A)...

...High-efficiency, water-cooled engine and spacious engine compartment; Comfortable operating cabin; Movable dust hood; Central electrical panel; Safe operating cabin; Powerful dust collector; Oscillation; Compressor and pre-cleaner for air; Ample storage space; Exceptional climbing ability; Two-stage dust collector.

...Air-cooled monobloc with self-supporting casing made of epoxy galvanized sheet metal. Liquid line mounted. High-pressure pressure switch. Programmable electronic regulator with 42 functions. Hot gas defrosting. Cubic evaporator. Capillary expansion. Door contact. Lighting window. Easily removable front panel. Convertible into a monobloc. COMPRESSOR UH To help you choose your unit, calculate the...

...It is a glass heated to a very high temperature, around 600 degrees, which will then become flexible. It will then be cooled either with a controlled jet of cold air.

...Technical gases such as oxygen, nitrogen, as well as argon and other noble gases are obtained by separating air into its components. The cryogenic process used for this was developed over 100 years ago by Carl von Linde and is named after him. In this process, air is compressed, freed from vapor, dust, and carbon dioxide, and then cooled to extremely low temperatures. It is then liquefied through compression and subsequently separated into oxygen, nitrogen, argon, and other noble gases through distillation.

...Air-cooled AC generator with permanent magnets designed for direct drive, suitable for applications without a gearbox, such as wind and hydro power plants. The standardized sizes range from 185 to 630. Significantly larger generators up to 3,000 kW are available as custom solutions, see series SW.

... AGION antibacterial coating • Integrated cleaning system • Condenser air filter • Double defrosting system • Outer casing made of stainless steel, DIN 1.4509 with rounded edge protection • Water-bearing parts made of food-safe materials • All dirt-prone components can be accessed from the front for service and cleaning purposes Item number: 1388772273037382 Capacity: 1 x storage container 68 kg Performance: approx. 210 kg in 24h Energy consumption: 35 kWh/24h Water consumption: 2200 l...

...Our air-cooled, fresh oil-lubricated rotary vane compressors with flow rates from 120 to 540 m³/h are based on the proven rotary vane principle. They are delivered as compact units on a torsion-resistant base frame. All sliding parts are continuously supplied with oil by an automatic lubrication system. Advantages at a glance: • Long service life • Low maintenance • Foundation-free installation • High availability • ATEX Category 2 Rated power: 10 – 40 kW Flow rate: 120 – 540 m³/h Overpressure: maximum 2.5 bar Compression: fresh oil lubricated ATEX: optionally explosion-proof...

...Air-cooled, 3000 RPM, 1 Cylinder, 50 Hz Synchronous Generator Type: PS200DX1 Generator Used: Sincro Max. Amps A: 200 AC Cont. Amps A: 150 AC Max. Electrode Diameter: 4 Alternator kVA 1~230V: 6 Alternator kVA 3~400V: - Motor Hatz: 1B40 PS: 10.5 kW: 6.2 cm³: 462 Tank (l): 5 Autonomy (h): 2.6 Dimensions: 83x55x60 cm kg: 105 dB(A) @ 7m: 78 LWA: *...

...The test stands feature a welded and powder-coated base frame on 4 to 8 support legs with rubber-metal foot elements. Compact and versatile performance test stand for load measurements on electric motors with air-cooled eddy current brake, equipped with torque and speed measurement devices, with disc brake for explosion-proof tests and gearbox motor loading, with drive shaft coupling and safety device, with hydraulically adjustable clamping plate.

...EMULSIONATORS INOTEC INOTEC: EMULSIONATORS MODEL I-140 / I-175 AND I-225 WITH OR WITHOUT VACUUM: Completely constructed from stainless steel, shaft transmission with clutch, air-cooled motor, cutting heads with up to 4 blades, cutting chamber diameter from 140 mm to 225 mm, automatic cutting adjustment.

...offering advantages over corona treatment for specific materials. The plasma treatment system can be used in both high vacuum conditions and atmospheric pressure conditions (like the corona treatment). The cap sealing system is used in the bottling industry and is designed to seal containers after they have been filled. It can be supplied air-cooled or water-cooled.

Evapton Heating and Cooling Systems, a premier heat exchanger manufacturer based in Turkey, harnesses over 20 years of expertise to excel in diverse markets and industrial segments. Our dedication to innovation is evident through three unique designs and licensed R&D software, enabling us to address a wide range of needs. Manufacturing pipes with varying diameters and wall thicknesses provides OE...

... characterized by highly precise temperature control, which minimizes temperature disturbances in the machining process of precision workpieces and improves the quality of shape and surface accuracy. Our cooling units are available in air-cooled or water-cooled variants with an active refrigeration cycle and as regulated heat exchangers. Additionally, we can offer our customers customized solutions...

... successfully implemented systems using the GWP-optimized refrigerant R32 multiple times. Our services at a glance: - Installation and commissioning of refrigeration systems (split systems, air- and water-cooled chillers) - Maintenance, repair, retrofitting, spare parts - Energy concepts according to the latest technical standards - Annual and semi-annual maintenance - Cooling concepts - Process cooling...

The high quality of our products and the unrestricted service of SLB are highly valued by our customers worldwide. Whenever heat needs to be dissipated into the surrounding air, SLB is the right partner. It does not matter whether oil, water, air, or other liquids or gases need to be cooled. SLB designs the optimal heat exchanger solution for you. For a wide range of applications and operating...

We are a registered master company in the field of sanitary, heating, and air conditioning systems. We specialized in surface heating and cooling ceiling technology years ago.

... for steel mills, and both cooled and non-cooled components for steel mills. For the petrochemical/oil & gas sector, accumulators and tanks are produced. In the energy sector: pipelines for forced conduits, sluice gates for dams, and heat exchangers. The main projects in the waste treatment sector include recycling plants for municipal solid waste and biofermentation cylinders for compost production...

... air coolers - Closed circuit air coolers - Compact tube heat exchangers - Condensers - Dry coolers - Economisers - Elfin blocks - Enhanced fin heat exchangers - Hydrogen coolers - Lubricating oil coolers - Machine oil coolers - Reboilers - Rotating machine coolers - double tube - Rotating machine coolers - totally enclosed air cooled - CACA - Rotating machine coolers - totally enclosed water cooled - CACW - Safety tube heat exchangers - Steam air heaters - Transformer oil air coolers - Transformer oil water coolers ...

... perfectly joined, and after an annealing phase at a temperature of 450°C, the strip is cooled, dried, and cut into sheets of the same length. A fully automated press performs the serial inflation of the Roll-Bond panels, which will then be squared with automated cutting lines.

...<b>Heat Exchangers and Coolers:</b> Depending on the requirements, stainless steel plate heat exchangers, tube bundle heat exchangers, or air-cooled devices are used. Almost all liquid or gaseous media can be cooled or heated (also possible electrically with our instantaneous water heater KD). <br> <b>Hydraulics and Units:</b> We configure and build units, modules (complete, ready-to-install...

... customers enables us to offer customized systems. Continuous research into new technologies and close collaboration with our customers allow for tailored solutions. Frigosystem has established its own product line in the field of temperature control devices and acquired Corema Spa in 2010. Our product and service portfolio includes: chillers, air-cooled and water-cooled refrigeration machines...

...and stripping tools) - manufacturing, development, and design of air- and water-cooled high-current cables as well as flexible connections made of strands, ropes, and foils - contact systems and power supplies for the fields of anodizing and galvanic technology - design and production of plant components and power transmission components in the field of high-current technology Test our performance and reliability. We are happy to send you detailed information about our products and manufacturing capabilities upon request.

... includes oil and emulsion mist filters, welding and soldering fume filters, dust and chip filters, as well as safety technology for oil-cooled machine tools. LTA air filters are used in the initial deployment on machine tools, as retrofits for existing machines, for hall air purification, or as customized solutions – entirely according to your requirements. Intelligent filtration systems not only...

... Airport. We build our own switching facilities and transformer stations for our data center. We ensure uninterrupted service through a modern, diesel-dynamic UPS. We optimally distribute energy and cooled air within the building. We connect every rack redundantly and efficiently to our telecommunications network. We ensure multiple access protection: mechanically and electronically. We secure early...

...accurate and economical solutions within our own facility. The products we manufacture are briefly; CATHODIC PROTECTION RECTIFIERS Air or Oil cooled SMART TEST STATION Up to 10 years battery life SMART POLARIZATION CELLS Mitigate the effects of DC interference and Telluric currents with Variable Resistance Grounding VOLTAGE STEP CONTROLLER Device that allows to adjust the protection...

The company WWS is part of a corporate group that is constantly seeking to improve the quality of life and to innovate. Water World Solution has developed the EAUXYGEN machine, a technology that recovers pure water present in the air to make it liquid and ready for consumption. 6500 km3 of water is permanently available in the atmosphere. This water, in vapour form, is healthy, pure and unpolluted. Nature maintains this volume constant, regardless of human activity. Once the vapour is processed, retrieved, filtered, cooled or heated, it becomes drinking water of a rare quality.

...BT offers a wide range of vintage VW parts, developed and manufactured by our own research and purchasing team. These parts are designed with the best price/quality ratio in mind to ensure that our beloved air-cooled Vintage VWs remain safely roadworthy. These parts are easily recognizable by the packaging developed by our BBT marketing department. Brake parts, wheels, wheel covers, door handles, fuel caps, running boards... We also have a large stock of NOS items (New Old Stock), as well as used and rare parts.

... 2010, exporting to Middle Eastern countries, with its experienced and respected staff. The products of our company include: • low and medium alloy steels • spherical graphite cast iron • lamellar graphite cast iron • air-cooled engine liners • compressor cylinder liners. We also produce other products at the request of our clients.