stainless steel heating

... customer-supplied hose lines into our heating solutions. A small selection of possible product options is listed below: • Robust PU spiral hose • Metal mesh made of stainless steel or in a galvanized version • Inner hoses in three different pressure classes • Food-grade inner hoses • A variety of different connection fittings...

...The Gowoll garden dome is made of recycled and recyclable polycarbonate, which was specially developed for our Gowoll garden dome. The rings are made of light and rust-proof aluminum and the screws are made of stainless steel and are therefore also rust-proof. The special honeycomb module allows you to easily install air conditioning or even a fireplace, while electric heating options and a...

...protective cap with sealing eye. Distribution connection block with 1 ½" male thread and 1" female thread, plus four additional ½" drill holes for, e.g., air vents, filling and emptying valve. Distribution connection possible from the left or right. Distribution outlet with ¾" male thread plastic and plastic compression fitting for PE pipe Ø 20 or 25 mm. Threaded rods and nuts made of stainless steel. Delivery of individual parts as a modular system or as a fully assembled and pressure-tested complete distributor with or without accessories.

...Robust Controller Insensitive to water shocks and freezing Suitable for overheated steam Internal parts made of corrosion-resistant stainless steel Installation position flexible...

...>> Capacity 5000 Kcal/saat • High heat and high efficiency. • Stainless steel. • Optimal heating system for the house environment. • Possibility of manual or automatic control. • It saves fuel because it reflects the temperature on the floor. • There is no temperature difference in the house. • Does not require electricity. • Heater can be adjusted thermostatically or manually. • Regular cleaning of the filter is recommended for perfect combustion.

...Flexible corrugated tube made from formed and welded stainless steel sheet. The waves allow for great flexibility for quick and easy installation. Includes connections to facilitate assembly. The joints are made using threaded fittings without the need for special tools. Manufactured entirely from stainless steel with an NBR or silicone gasket included. Availability to manufacture ULTRA THIN on request.

...Heating plates made of copper, stainless steel, or composite metals for laboratory equipment must be heat-resistant, chemically resistant, and above all, easy to clean. The smooth, pore-free surface can be easily disinfected when necessary.

...Available diameters: 4.0 to 53 mm Pipe jacket materials: Stainless steel, steel, and brass Lengths: up to 6000 mm...

... valves, series MV5200 - MV5300 - MV5400 - MV5900 Pneumatic control valves PV6200 - PV6300 - PV6400 - PV6900 In straight and three-way configurations For throttling, mixing, and distributing liquid, gas, and steam media Nominal sizes DN15 to DN400, ANSI 1" to 12" Pressure ratings PN16 to PN160, ANSI Class #150 to #900 Various materials from GJL-250 to 1.4408 and heat-resistant steels Internal fittings made of stainless steel or ferro-titanite...

... steel flue for fire safety and a special heating boiler for increased demands. The integrated dual-fuel burner is capable of burning both oil and gas. With the installed tank heater, the internal safety oil tank system is maintained at temperature. This ensures reliable operation with heating oil under all temperature conditions and guarantees a smooth process. If the existing tank volume is insufficient, external oil tank systems can be connected.

...Series: Automatic Segment Shutdown System, LCD Thermostat, Frost Protection, Mounting Kit, Stainless Steel Aluminum Housing 2000 Watts 2400 Watts 3000 Watts Width: 138 cm Weight: 44 kg Options: Control Knob Thermostat Wireless Thermostat GSM Control Accessories: Mobile Set: Wheels & Stand Towel Holder Stand Consoles for Anchoring...

...Control humidity and moisture with one of our 1600 m³/h industrial dehumidifiers. This robust device combines elegant design with excellent performance. Sturdy equipment for the rental market. Discreet stainless steel housing. Integrated heating control ensures maximum efficiency year-round. A remote-controlled humidity regulator is available upon request. A cost-effective way to reduce the...

...Stainless steel shelves (2m high) with integrated charging stations allow for the simultaneous heating of up to 8 thermal bags while ensuring a constant operating temperature. These shelves are available in two variants: one version with 6 bags and another with 8 bags. The number of heated bags on the shelf can be flexibly adjusted to meet individual requirements.

...High-quality quality through stainless steel! Material: Stainless steel AISI 316L (EN 1.4404) Including insulation: Up to 500 liters: 75 mm rigid foam and 5 mm film cover (removable) in RAL 9006 silver, pre-assembled 800-1000 liters: 120 mm GREEN LINE insulation, 100 mm lid insulation, bottom insulation, and 5 mm film cover in RAL 9006 silver, removable Operating pressure: max. 10 bar...

...Gufo HG gas fired heater is designed as an economic heating solution to be used in the winter gardens of restaurants, cafes, hotels and offices, smoking areas and terraces. Impact, moisture and wind resistant stainless steel chassis. Resistant to 1100 degrees and thermal shocks, having 98% heat conduction and aesthetic ceramic glass. With the low or high step burning system, the desired...

...stainless steel chimney. heating systems for natural gas furnaces and industrial plants, stainless chimney lnox material...

... liquids: made of Incoloy 825 with 1½" or 2" brass nipples or an AISI 316 stainless steel nipple Screw-in heaters for oil: AISI 304 stainless steel with 2" brass nipple All are supplied in the configuration 3x400V. On our product sheet, you will find an overview of the standard program with information on power, immersion length, unheated zone, surface load, and coupling.

...-cooled climate devices, as well as plate heat exchangers and rotary heat exchangers. Dryers, such as stainless steel continuous band dryers, are also available at Brand GmbH. All devices are thoroughly tested for functionality, and knowledgeable staff are happy to provide advice on proper operation and use of the equipment.

...GENERAL FEATURES · Stainless steel construction 18/10 AISI 304 · High-quality stainless steel heaters · At the same time not activated heating system provides energy-saving · Door with double skin · Cycle starts after door closed · Automatic tank loading · Heating control with safety switches · Magnetic door switch · User-friendly simple command interface · Height adjustable feet · Drain, detergent and rinse aid pump can be connected to chassis...

...Ball-Mill Ball-mill is batch type refiner for processing cream, natural and palm based chocolates and similar products. Ball mill tank is double jacketed and heated by electrical resistances. Inner and outer jacket , agitators and balls are stainless steel. System also includes thermostatically controlled heating system . The chocolate pump which is used for circulation is also used for discharging. Process time is depends on raw material fineness . Process takes approximately 2½ hours.

...Machine for extracting essential oils from medicinal plants. It consists of: a tank with a capacity of 20 liters made of reinforced and insulated AISI 304 stainless steel to limit thermal losses and reduce energy consumption; a reinforced domed lid; an innovative rapid energy-saving heating system; 3 stainless steel baskets complete with lifting handles.

...Fittings, decorative items, die-cast parts, facade elements, window grills, window profiles, garden gates, heating enclosures, automotive parts, agricultural machine parts, frame parts Welded and steel constructions, stair railings, stainless steel railings, fencing systems, among others.

...High-speed paint stripping agent - No heating and circulation required - Only re-sharpening - no replacement necessary - Stripping tank specifically for cold stripping - Membrane pump and filter system for automated cleaning - With lifting system for rims - V4A stainless steel...

...The Plug n Glow is a small stainless steel flow boiler with many applications. It has 22mm connections for ease of installation, a 13 amp plug fitted and can be programmed up to 20 times a day seven days a week. It can be used in a sealed system up to 3 bar pressure or in vented applications. Temperature is adjusted from 30 to 80 degrees by a calibrated dial on the front of the case or it...

...The gas heaters are specially designed for the corrosive environment inside greenhouses and tunnels. These are machineries used by professionals in order to obtain the ideal climate for the crops. One may chose between nozzles for natural gas or for propane (GPL). The air admission is made from the exterior. The evacuation of the burnt gases is made through a stainless steel exhaustion system. A...

... - either using the fresh water principle with a stainless steel plate heat exchanger for combination devices or, in case of high demand, with a hot water storage tank from the diverse Wolf program. The 3-way valve and safety valve are already factory-installed in all devices, saving additional installation effort. With the hydraulic and flue gas side system accessories, a quick and cost-effective replacement of old devices from common brands is achieved. Tailored accessory sets for fixed installation are also available for initial installation.

... Resistive wire* internal insulating ARMOURED TYPE: WORKING TEMPERATURE: MAX 700°C Armour in stainless steel Heater*, consisting of a ARMOURED heating element with stainless steel tube. Element development up to 8.00 m. Resistive internal filament* insulated with first choice MAGNESIUM OXIDE.

... heaters as standard with Cr-Ni smooth tube heating elements. For a lower surface temperature, we offer finned heating elements. They are secured with stainless steel nipples, which can be either pressed or soldered.

...The VD 4632 design radiator is a double radiator with square fins in an industrial style. It can be installed vertically or horizontally, and is available in chrome, stainless steel, and various colors. It comes in both central heating and electric design radiator options, as well as in multiple power outputs. ref: VD4632...

...Hot air drying centrifuge in stainless steel design. Especially suitable for drying small parts and sensitive workpieces in wire mesh baskets. Advantages: - Very short drying times - Less heating energy due to high air throughput...