stainless steel cylinder

... galvanized, passivated steel - Equipped with a magnetic piston for end position detection/position verification - Proximity switch available as an accessory for position verification - Option for speed throttling - Clamp is galvanized and passivated - Rivets made of stainless steel - Case-hardened bearing bushings, all bearing points are pre-greased. - Delivery complete with tempered and galvanized pressure screw MS10/20 and MS10Z - Limited-time promotional prices starting from €109 - CAD data available upon request! Size: 1 Max. holding force: 1.2kN...

...Single-acting pneumatic stop cylinder with rolling bearing, standardized ISO 21287, bore diameter 20mm, rod exit - NYSER-020 Single-acting or double-acting by removing the spring Magnetic piston Fixed end-of-stroke dampers Tube and front and rear flanges made of anodized aluminum Universal sensor mounting grooves in T-shape Stainless steel anti-rotation rod and reinforced guidance Stop device with rolling bearing Body and flanges made of anodized aluminum Seals: PU/NBR Load diagram: see pdf Bore diameter: 20 mm Stroke: 15 mm...

... dioxide. Adheres to the European rules and regulations Disposable cylinders made from stainless steel Improved cylinders guaranteeing full capacity Reference:UN.Nr 1013 Class 2 / 5.1 ADR-RID:20 Capacity:600, 1250 or 2200 gram...

...Custom-made transport frames for trucks, warehouses, and event halls. Mobile, stackable, always matching the standing table, individual removal possible. Load securing! The right transport frame for every standing table and your requirements. We build custom-fit solutions. Mobile carts for event halls, galvanized transport frames or stainless steel frames that can be moved with a hand truck...

... (check valves, lowering brake valves) - Built-in directional valves (mechanical, electrical, proportional) - Cylinders made of stainless steel or aluminum - Cylinders painted according to customer specifications - Cylinders galvanized -...

...TECHNICAL FEATURES: This part is mounted on chamber vacuum machines; its function is to raise and lower the sealing bar by utilizing the vacuum of the machine itself. MATERIAL FEATURES: The cylinder consists of an outer body and nut made of 30% glass-filled acetal resin; the internal components are made of IXEF, the seals and membrane are made of NBR, and the rod is made of stainless steel.

...Mailbox - Stainless Steel - Weatherproof and corrosion-resistant white steel mailbox - Dimensions (HxWxD): 32 cm x 21.5 cm x 8 cm - Slot opening: 18 cm wide and 2.5 cm deep - Volume: 9 liters - Screws, dowels, and wall spacers (rubber stoppers) for installation included - Powder-coated in white - Easy installation with 4 screws - Cylinder lock including 2 keys (with rubberized key head) Item number: 400003 Category: 152 Color 1: Stainless Steel Dimensions (H x W x D): 320 x 215 x 80 mm...

...-capacitors (SIEMENS/EPCOS codes B25353), which makes them ideal drop-in replacements for maintenance and retrofit programmes. Moreover, the low-loss polypropylene dielectric permits a far higher AC ripple load than with the conventional MP-capacitors. Our SR17™ are housed in a hermetical stainless steel cylinder. As opposed to the oil-filled MP-models, these are filled with an eco-friendly solid resin which does not only make them safe against leakage of liquids but also insensitive to the shocks and vibrations common in traction applications. The same applies to their robust plastic insulators.

...T-traction gas springs operate in contrast to standard lift-type gas springs. The piston rod is in an unloaded state within the cylinder, and when it is pulled out, the force attempts to pull it back into the cylinder. The Attraction series is available in black painted steel and stainless steel AISI 316.

...Piston pumps are used, especially in "driven" wells, for the reliable water supply of residential houses and agricultural operations. They are self-priming up to about 8 meters deep. Product Features Robust gray cast iron construction, cylinder made of brass or bronze, piston rod made of stainless steel, adjustable packing gland seal, air vent valve for ventilation, self-priming, built-in safety valve (depending on type) Technical Data Operating Pressure up to 6 bar Flow Rate from 1 m3/h to about 5 m3/h Brands Löwe Wasserknecht, Grundfos, and Speck...

...Coin validator with light barrier - 1-digit LED display - Easy connection via 5-pin connector - Powder-coated stainless steel housing - With cylinder safety lock Expandable with numerous special features...

...Linear unit with vernier MATERIAL - Upper carriage, lower guide, and end plate made of anodized extruded aluminum. - Guide shafts, drive screws, and ball bearings in stainless steel. - Plastic nut. - Stainless steel fastening screws. - Vernier in black anodized aluminum. USAGE - Combines with numerous accessories for use in various configuration axes. - A unique fastening technique for simple...

... tension cones, and a hex screw. Alternatively: For permanent bolting. Design – Material: Stainless steel 1.4301, pickled and ground (280). – Powder-coated upon request according to RAL or DB 703 iron mica. – Acrylic cylinder available in clear or satin finish with 8 slat reflectors. – Lower bolting: Security screws (internal hex with pin), including key. – Protection class 1, protection rating...

...Fourfoldtoilet roll holder in stainless steel (AISI 304) for surface mounting. Allstainless steel housing; visible surfaces satin finished and brushed. Designed for four standard toilet rolls, three of them concealed reserve rolls, each dropping down automatically. Inspection slot to indicate fill level. Accessible for refilling through lockable, hinged housing. Keyed alike cylinder lock in corrosionresistant zinc diecasting. Delivery includes fixing material. Dimensions 353 x 350 x 120 mm...

...When working with a pressure of 150 or 160 bar, dirt is quickly removed – no matter how stubborn it may be. For the best cleaning results and maximum safety, the Pro models also feature steel-reinforced high-pressure hoses, stainless steel pistons, brass cylinder heads, and a very robust design. Advanced features include pressure regulation, a hose reel with an integrated hose connection, and a...

...Note Delivery wheels GN 736 are used for adjustment processes with low torque. The coarse adjustment can be made via the rotating cylinder knob (finger grip), while the fine adjustment is done at the knurled ring. Execution Aluminum black anodized Cover Plastic, light gray Clamping collet / hex nut Brass Stainless steel threaded pin DIN 916 with internal hexagon and ring cutting Rotating cylinder knobs GN 599.5 Plastic, thermoplastic black, matte Shaft part stainless steel corrosion-resistant, 1.4305 Rotating cylinder knobs GN 599.5 RoHS...

... sources within the recipient Low power consumption Supply voltage 12 – 15 VAC or +12 – +24 VDC With 5 m supply cable with molded, angled plug Short description: JEVAlux® FLL-25K-xxx-L, but as on stainless steel flange DN40CF...

...6 WECK TUBE® glass jars 340ml with glass lids and rubber seals (clips not included). Reference: 5905208 Capacity: 340 ml Opening: 60 mm. Lid and seal provided. Stainless steel clips not included. Height in mm: 130 Capacity in GR: approximately 250 grams depending on product density. WECK TUBE® or Cylinder jars. Weck Tube® glass canning jar with lid, rubber ring, and 2 securing clips. Weck...

... components are hot-dip galvanized or made of stainless steel - Main support made of 2 x steel tube 100 x 80 x 3 mm - One-piece aluminum oval barrier beam 102 x 82 mm, with anti-sit protection and sign/ad display from 5500 mm with cable pull reinforcement - Support made of steel tube 70 x 40 x 3 mm, height adjustable 30 mm downwards, 200 mm upwards - Installation by bolting the base plate or...

... superior quality. Pollux locks are made from high-quality materials such as stainless steel, hardened steel, and brass. Thanks to their robustness, these locks can withstand attempted break-ins. Pollux locks are also equipped with a high-security locking system. They feature a high-precision cylinder and anti-drill, anti-pick, and anti-bump pins.

...12 boxes/minute - Stainless steel body and components - PLC control system (OMRON) - 7” color LCD Turkish operator panel (OMRON) - Time and speed settings via the operator panel - Automatic bottom cover closing system - Pneumatic cylinder-driven box opening and pushing system (FESTO) - Mechanical safety switch safety doors (SICK) - Automatic stop when doors are opened - Box magazine compartment...

...Flexibility and versatility in handling your metal packaging and thin sheets. Application Areas Canned Goods: - full or empty cans, - full jars with Twist Off lids, - bottles with loose or bulk caps. Mechanical: - various parts, please consult us. Execution - compact unit under stainless steel housing, - integrated pneumatic ejection cylinder, - magnetic circuit based on high-performance...

...dry self-priming displacement pump, very well suited for drawing concentrates from containers, also suitable as a dosing pump for beverage additives. The Mouvex ring piston pump is characterized by excellent suction properties. The stainless steel piston/cylinder pairing allows for the generation of a very high vacuum. Chilled or highly viscous fruit concentrates can be drawn in without prior...

... cylinder with 2 folding keys, Handles made of stainless steel, Volume-conductive version available according to DIN EN 61340, Double swivel casters (50kg/caster), front casters with brake, Base cabinets & mobile containers available in series 570 or series 770, Drawer height division 1HR, 2HR, 3HR; 1 HR corresponds to approximately 100mm...

...Piston filler. For filling, portioning, and capping. Filling cylinder with a capacity of 30 liters unique hygiene system machine body entirely made of stainless steel modern drive concept minimal energy consumption 12" touchscreen control extremely quiet and smooth operation reliability through quality...

...Linear Multi Sampler is made of the following materials: • Mild steel (S235JR, thickness 6 mm) - Sampler body • Natural rubber (NR Shore A50-60, thickness 5-20 mm) - Inside of the sampler is coated with natural rubber - Other rubber qualities available by request • Epoxy paint - Outside of the sampler is coated with epoxy paint (3 layers) - The nominal dry film thickness of the paint: 240 μm - Color: as per request of Clients * Stainless steel (AISI 316, EN 1.4401) - Fixed cutter sets - Moving cutter set - Sample tank - Other materials available by request • Aluminum - Cylinder...

...The linear displacement sensor operates on the principle of differential measurement (inductive half-bridge). It consists of two coils encapsulated in a stainless steel cylinder that provides good protection against vibrations, shocks, humidity, oils, and corrosive materials. The displacement of a mu-metal core placed at the center of these coils causes opposing variations in inductance. The...

...BAYKON BL scale is low profile design providing ergonomic usage for the areas not suitable for in pit scales. With its full stainless construction and IP68 protected stainless steel load cells, BL scale is compatible with GMP and HACCP production standards and perfectly fits to corrosive, wet, and hygienic industrial environments in chemical, food, pharma and cosmetic industries. Specially...

...All plastic bodies are made of 100% polypropylene. The bristle bundles are secured with stainless steel wire. 1 Broom 30 cm 2 Broom 40 cm 3 Broom 60 cm 4 Broom 80 cm 5 Dustpans (stainless steel) 6 Dustpans (plastic, white) 7 Hand broom 8 Hand broom (long handle) 9-12 Cylinder brushes (with loops) 13 Scrubber 30 cm 14 Scrubber 40 cm 15 Hand wash brushes...

...Mailbox system BRETAGNE with 6 mailboxes (3 side by side). Mailboxes with a housing made of hot-dip galvanized steel sheet and a door made of aluminum. Stand made of aluminum rectangular tube (40 x 40 mm). All steel and aluminum parts are powder-coated. The system is equipped with an additional back wall. Includes 1 nameplate. Locking via stainless steel cylinder lock, delivery includes 2 keys...