thermal pumps

... systems, heat pumps, air conditioning systems, etc. The inhibitor system protects all commonly used metallic materials, ensuring safety against corrosion and deposits (tested according to ASTM D 1384-96 by the Institute for Air and Refrigeration Technology, Dresden). GLYKOSOL N is miscible with water in any ratio. A concentration below 20 vol.% reduces corrosion protection and should be avoided. GLYKOSOL N-water mixtures can be used at temperatures of up to approximately +125 °C.

...Our low-temperature air-cooled chillers with 50 kW are ideal for temporary freezing and refrigeration applications, providing consistently low temperatures. If you have a planned project or an emergency, we will find the right solution for your needs. - Environmentally friendly R507 refrigerant gas. - "Cold fluid" side made of stainless steel to handle a wide range of thermal fluids. - Semi...

...rural biogas digester, farmland irrigation and other industries, as well as sewage with conveyor belt particles. It can also be used for clean water and corrosive media. Price Term:FOB China port Payment Term:TT, LC,PAYPAL,WESTERN UNION OEM ORDER:Acceptance Model:WQ series Submersible pump series:Fitness and entertainment pump Thermal protector:single phase Insulation:F Protection:IP68 Medium temperature:0~40℃ The diving depth should be less than:5m...

... conductivity Self lubricating, excellent use in pumps, minimizing the need for flushwater Easy to cut, assemble and disassemble No shaft wear, excellent dry running characteristics Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 300 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.00 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Main application Centrifugal pumps Valves Control valves Gate valves Steam High Pressure and Temperature Valves Suitable for Power plant technology Boiler houses Chemical...

... • Measurement and control technology • Sanitary and building technology • Electrical engineering • Electronics • Drive technology • Automotive • Mechanical engineering • Pumps and valves At the same time, we focus on long-term tests/examinations under various thermal, hydraulic, and mechanical conditions.

...The DEPAC Type 700 is made from 99.9 percent pure graphite. This results in a packing that is chemically pure, self-lubricating, and has a low friction coefficient. With excellent thermal conductivity and minimal friction, this special seal can be used even at the highest speeds without causing scoring on shaft surfaces. This optimizes service life. The Type 700 is particularly suitable for steam valves, fittings, as well as hot oil pumps and valves.

... address, and landline phone number 4,260 Fax numbers 23,007 Emails Purchase, sale, and rental of B2B professional files for prospecting companies involved in the installation of thermal and air conditioning equipment, photovoltaics, solar systems, heat pumps, and various energy savings. The commercial prospecting file for this sector also includes installers of heating systems (electric, gas, and oil), boilers, cooling towers, and energy collectors.

... VARGORT flat gaskets is to provide sealing, being used in areas such as heating radiator fittings, flat plumbing gaskets, gaskets for radiator caps, flat gaskets in heating pumps, universal tap pumps, thermohydraulic applications with low bolt load, and fittings for heating radiators, essential for any home and at a very economical price.

... system operates with the highest efficiency and operational reliability. Consumption and harmful emissions are reduced with clean combustion. In addition, ERC Guard Thermic 3000 HP increases the thermal stability and the storage life of heating oil. Deposits which are already present are also dissolved. ERC Guard Thermic 3000 HP is formulated such that sediments are slowly dissolved in small quantities and burned with the heating oil without leading to faults in the heater. Dosage:4000 Nozzle cleaning:++...

...Manufacturer: EBARA Pumps Europe S.p.A. Branch Factory No. 1751006500 Flat suction pump made of stainless steel for the disposal of dirty water with solids up to Ø 10 mm, with attachable flat suction device down to 3 mm residual water level, absolutely suitable for continuous operation, all main components made of stainless steel with robust mechanical seal, integrated thermal protection switch...

...Construction of Boiler House 2 MW with 300°C Piping construction for thermal oil pipelines, boiler setup including air preheater and dual-fuel burner for natural gas and light heating oil, mixing distributor with transfer pumps, old boiler house integrated into the new piping network as redundancy.

...The HP Hygienic Series, ranging from 200 to 2000 liters, is meticulously designed for optimal compatibility with heat pumps. This series features a composite high-performance removable thermal insulation, 80 mm thick, ensuring efficient thermal management. Key Features: Adapted for Heat Pumps: Crafted to seamlessly integrate with heat pump systems. High-Performance Insulation...

...Rauschert offers the complete range of high-purity ceramic high-performance materials based on both oxide ceramics and non-oxide ceramics for applications in medical technology. Our manufacturing program includes components for endoscopy instruments, parts for pumps and valves, porous ceramics as filters, components for analytical devices, electrical and thermal insulation components, as well as...

... both initial filling and service filling of the compressor. The Emkarate brand POE refrigerant oil combines low-temperature properties with excellent chemical and thermal stability. Ester oil Emkarate RL100H Density at 20 °C: 0.969 g/ml Flash point: 260 °C Kinematic viscosity at 40 °C: 96.5 mm²/s Kinematic viscosity at 100 °C: 11.3 mm²/s VI (Viscosity Index): 103 Pour point: -28 °C The shelf life of Emkarate RL oils, when stored under normal conditions, is considered indefinite with a recommended retest date of 4 years.

...Indirect steam generation with a steam generator. Heating is done using thermal oil. Our hot and warm water systems are supplied either as individual components or as a complete package, including water treatment (softening system), feed water pumps and tanks, as well as a control cabinet.

... charger included. RKB2 Wheelbarrow kit Wheelbarrow kit for generators over 6 kW RKDS3 Maintenance kit Maintenance kit for KOHLER KD425-2 engine RH2 Protective cover Protective cover for generators, welding machines, and SDMO water pumps RPM Male plug kit Male plugs for all models including: 2x16A/230 V, CEE17: 1X16A/230V, 1X32A/230V and 1X16A/400V RPQ Ground stake For connecting the mass of your generator to the ground. Galvanized stake 1 m long, supplied with 2 m cable in 10mm² section. STD-MODYS...

... thermal conductivity ranges from 0.007 to 0.01W/m∙K, significantly lower than rock wool (0.06W/m∙K) and urethane foam (0.04W/m∙K). The VTA/V-1 occupies similar space to traditional models. Key benefits include: — capacity of 2000-10000 liters; — possibility outdoor installation; — underground installation capability; — up to 10 times better thermal insulation in comparison with analogues; — absolute insulation moisture resistance; — long-term heat retention(ideal for heat pumps and solar collectors); — stable temperature stratification of heat carrier through the system of stratification.

... water pumps. They require minimal space and have a short heating time. The steam systems are also available as a unit with factory-installed water treatment. Steam output: 0 — 320 kg/h Thermal output: 8 — 240 kW Electrical connection value: 8.75 — 240.75 kW Height / Width / Depth: 1,900 / 774 / 1,150 mm Max. operating pressure: 3.0 — 14.5 bar Max. allowable overpressure: 4 / 6 / 10 / 12 / 16 bar...

... fixtures and fasteners; electrical and electronic components; springs; chemical processing equipment; gasoline and fresh water tanks; crude petroleum stills, process vessels and piping; boiler feedwater heaters and other heat exchangers; and deaerating heaters. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):427 J/kg/°K Thermal conductivity:21.8 W/m/°K Thermal Expansion:13.9 μm/μm/°C Modulus Elasticity:173 Gpa Electrical Resistivity:5.47 μohm/cm Density:8.83 g/cm3...

... applications including de-icing pipes, valves, pumps, and much more. • Moisture and chemical resistant. • Multi-stranded resistance wire heating element offers exceptional flexibility and durability. • Fast thermal response delivers precise heat when you need it. • Safe for use with glass and electrically conductive metal surfaces. • Available in lengths of 2' (0.6m), 6' (1.8m), 10' (3.0m). • 10X heating power of a typical frost protection water line.

...PTFE membranes offer the right combination of mechanical, thermal, and physiological properties. PTFE membranes with good bending fatigue resistance, nearly universal chemical resistance, excellent sterilizability, and FDA approval. Design: For liquid pumps in the chemical industry.

...In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in the heat exchangers, heating elements, and pipes, resulting in a lower thermal efficiency within the system. The dirt separator separates off these dirt particles, collecting them in a...

... transport goods such as drives and gearboxes. The motor technology sector often relies on our disposable packaging with PP ribbed plates. For motors and pumps, for example, these are often the suitable packaging solution. Reusable packaging made from polypropylene ribbed plates proves to be very useful for users in the long run. Companies in the mechanical engineering sector transport and store their stamped and pressed parts in them, among other things.

...Projection and injection of dry mortar, grout. Dry mortar, grout pump - Electric, diesel machines. FC. CE certified: Universal: For all types of dry mortar, traditional, perlite. Thermal isolation plasters, insulation, colored plasters, cement renders, lime and priming materials, perlite plasters, interior/exterior plasters, injection, reinforcing and bonding mortars, self-leveling floor screed...

...). * Water filtration system at the inlet. * Water softener installation. * Osmosis installation. * Option for thermal group Electric Diesel Gas. * Autoclave for osmosis water. * Complete hydraulic installation. * Anti-freeze kit (insulation and heating of the interior). * Interior lighting installation. * 2 integrated lance doors. J-TECH 2 :100BAR 60°C 9KW 1000KG J-TECH 2 LP (ELECTRIC) :50/100BAR 40°C 11KW 920KG J-TECH 3 :100BAR 60°C 11KW 1100KG J-TECH 3 LP (ELECTRIC) :50/100BAR 40°C 16KW 1020KG J-TECH 4 :100BAR 60°C 13KW 1200KG J-TECH 4 LP (ELECTRIC) :50/100BAR 40°C 18KW 1120KG...

...Technological innovations in electric heating are numerous. Thanks to advancements, electric heating provides true thermal comfort for your home while ensuring energy and financial savings. To operate, electricity heats the resistors that distribute warmth through a radiator equipped with a thermostat. There are no issues with storage or supply; you simply need to be connected to the electrical...

...Air-cooled process chillers for outdoor installation, equipped with free cooling, storage, and pumps.

...Pipe fittings, galvanizing baths, pumps, valves, agitators, apparatus, fans, containers, or other supporting structures are permanently protected against corrosion and wear by our rubber coating systems. From the design of components according to DIN 28051 / 28053, we have extensive experience to realize your ideas and concepts. Upon request, we develop and deliver complete components including steel construction.

... of the mentioned cases, thanks to our knowledge and experience, we enhance the efficiency and effectiveness of the technologies applied there. We are here to assist in finding and building complete solutions. Contact our specialists to discuss the possibilities of thermal energy recovery!

...Heating capacity: 282 kW - 56,489 kW Thermal resources: Steam, hot water, exhaust gases, natural gas, diesel, biomass, etc. Recovery of lost steam from the turbine condenser and the turbine jacket water, in order to utilize it for heating networks and to preheat the boiler's make-up water. Recovery of lost heat during a process to heat all types of industrial processes. Recovery of exhaust gases from the boiler or other low-temperature hot sources for heating purposes. Recovery of low-temperature hot sources from solar or geothermal energy for heating.