thermal panel

...a general electrical panel for lighting, services for any equipment, and sensors. Inside, they are fitted with the required generator and any accessories such as condensate recovery tanks, automatic water treatment systems, heat exchangers, reducers, antifreeze heaters, thermostats, etc. All complete with electrical and hydraulic connections (stainless steel upon request) ready to be connected and put into operation.

...Aluminium enclosure, high thermal conductivity for optimum passive heat dissipation. Low weight coupled with high stability. Protection category IP 65 to IEC 60 529. CP Compact Panel, for front panel BH 520x400 mm, installation depth 74 mm, Extruded aluminum section, Support arm connection 120x65 mm, Hinged rear panel with screw lock Design:Support arm connection, rectangular 120 x 65 mm...

...OKALUX HPI High Performance Insulating Glass Module consists of a vacuum insulation panel installed in the cavity of an insulating glass module, which can be combined and laminated with numerous design inserts. The vacuum insulation panel allows for excellent thermal insulation with very slim constructions. The opaque insulating glass modules can be used in areas of the facade where no light...

...Thanks to the solid construction, the Dynaco I-14P Panel sectional overhead door is wind resistant up to class 3 of the European standard EN12424. Insulated panels designed without thermal bridge reduce thermal transmittance and consequent energy costs. Reliable and safe This exterior sectional overhead door protects your premises against intrusion. Extra safety devices can block downward door movement to assure user safety. Maximum height:H 6000mm Maximum width:W 8000 mm Opening speed:up to 0,5 m/s Closing speed:up to 0,25 m/s...

...We are a supplier of aluminum foil for the production of thermal insulation sandwich panels. Aluminum foil with a thickness of 40-200 microns. Possibility to deliver smooth aluminum with an embossed finish. For better adhesion of the aluminum foil to polyurethane (PIR) / polyisocyanurate (PUR) foam, the foil can be supplied with a primer on the inner side. Similarly, a coating on the outer side is recommended to enhance the corrosion-resistant properties of the foil, in humid environments.

...linear actuator for solar tracker type: The field of flat panel photovoltaic systems CPV (Concentrated Photovoltaic) systems The field of solar thermal parabolic tracking systems such as solar cookers and high-temperature solar heaters among others. Solar parabolic trough collectors Solar thermal power towers (Heliostats)...

...The Angastiniotes AW1000 insulated wall panel is a standard fix micro-lined profiled panel which can be used for building applications and can be installed both horizontally and vertically. They are manufactured with an eco-friendly and fire-proof polyurethane (PUR) core. It is also available in a secret fixing profile. ​ Micro-lined wall panel are very cost effective, lightweight and suited to a wide variety of applications, including new build and refurbishment, and there is a broad selection of colour, finish and profile shape.

... essential thermal management function by blocking unwanted airflow. It can be used to solve the growing concern about the increasing energy cost in the data center. Some racks can experience more than twice the strength and ruggedness by simply installing Spacer Blanks at regular intervals. The 1U brush panel simplifies cable management and helps keep the equipment inside the rack cabinet free of dust and dirt.

... spores, cigarette smoke, exhaust gases, chemical vapors (formaldehyde, toluene, VOCs...), and odors. The features of the AP25 purifier include an automatic mode, a turbo mode, and a night mode. Its control panel displays real-time ambient air quality and PM2.5 particle concentration through LED lighting. Power: 7 – 55 watts Dimensions (H x W x D): 452 x 351 x 223 mm Weight: 6 kg Power supply: 220-240V, 50/60 Hz...

As Protek Panel Cooling, we provide services in the field of industrial cooling. We manufacture sandwich panels, cooling units, and cold room doors. We undertake turnkey projects. Protek Panel Cooling identifies the needs of all customers requiring cold storage. With our service called Turnkey Contracting Service, we are here to support you with the products, services, control, installation, and m...

...The rigid or semi-rigid material, made from natural, plant-based, or synthetic insulators, known as insulating panels or thermal insulation boards, will be perfectly suited for your repair, renovation of a wall, or enhancement of the thermal comfort level of a home. FARHAT assists you in choosing the type of rigid insulating panel that meets your needs as well as in its installation. Whether you...

...Skymaster 700 N Kit Height (Table): 2000 mm Width (Table): 4000 mm Pattern: Smooth Lintel drop (minimum): 150 mm Jamb (minimum): 80 mm Technology: Double wall in galvanized steel Panel thickness: 42 mm Insulation coefficient: 0.51 W/m²K Paint: Satin polyester Panel warranty: 10 years Motor warranty: 2 years...

... equipped with PLC control panel and HMI display with full automation for process control, reporting, process monitoring and also management of alarm conditions. The heating options of GEO barrel heating furnaces includes systems such as electric heating, open steam heating, and steam coils. Energy Source Open Steam Steam Coils Hot Water Coils Hot Thermal Oil Coils Superheated Water Coils...

... operating zones. The heating intensity of each zone is automatically adjusted based on the data received from the thermal sensors located inside the ceramic emitters equipped with a thermocouple. This ensures compensation of heat losses at the edges of the product and helps to avoid overheating in the center. All infrared panels are assembled at our facility from scratch to the final product. We run multiple tests to make sure they are 100% in line with all the requirements and expectations. Our clients are welcome to attend such tests.

...Central cooling systems are designed units to use for the removing of thermal loads which are pointed at more than one cooling point. The system will have the appropriate capacity depending on the desired power designed in the same or different capacities of compressors. Electric power supply and control panel are on the unit, and all connections are made in the factory. Scrolling, hermetic...

... cladding sheets are fixed to the frame by welding points. The spacing of the welding points is 200 mm. The insulating core is made using two rock wool mattresses. An additional thermal screen is placed between the two insulating mattresses. The door edges are fitted with two strips of bulk product, with the cut ends sealed to ensure maximum protection against moisture. Each glazing is placed between two glazing bars that are screwed onto the door with screws. The distance between the screws is...

...Construction panel with 4 tapered edges made of a gypsum board (80%) and recycled cellulose fibers (20%) along with an expanded cork panel. Lambda of cork: λ = 0.04 Fermacork: Fermacell gypsum board and cork insulation board for acoustic and thermal insulation of walls. The market introduction of a Fermacell board with cork meets the growing demand for interior insulation of exterior walls using...

...The Thermopanel is a new, unique product designed for both thermal insulation and façade decoration. The core of the panel is made from rigid polyurethane foam (BASF). This polyurethane foam meets hygiene standards, does not create a breeding ground for microorganisms, does not rot, mold, or decay, and creates a healthy environment suitable even for allergy sufferers. The outer side of the panel...

... material. Good rigidity, dimensional stability, low weight, good thermal insulation, and excellent fire properties, conduct a wifi and cellular signal, water resistant. Combines strength, low weight and fire safety in the same material. Artboard AB has certifications and product tests including Railway EN 455452 2015, Marine MEDB, MEDD from Det Norske Veritas (DNV) and ISO 90012015. Used as Partition walls, tables, doors, ventilation and air ducts and any types of finishing elements, incl. floors with HPL & aluminum surface.

...We have all the pool accessories: automatic and manual cleaners, showers, slides, underwater lights, covers, thermal blankets, salt systems, and counter-current swimming equipment. It contains everything necessary for proper water maintenance: - P.R.F.V. filter with a multiport valve. - Electric pump. - PVC pipes and valves. - Electrical panel with fuse, differential, and programmable timer.

... from 32 to 42 dB, depending on the type of glass or panel selected. Thermal insulation is equally excellent, with a Ud coefficient that can reach 1.29 W/m2K (with Ug of 1.1 W/m2K) and a Uf value of 1.7 W/m2K. Regarding the glass, the standard configuration includes glass with 6 float layers/16 Ar w.e./6 low-e with Ug of 1.1 W/m2K, with the option to add a warm edge as a complimentary feature with any order. The accessories for these doors are from the German brand SIEGENIA COMFORT and are included as standard.

...Resistant: Face set in the profile with mechanical fixation of the rails in the profile Aesthetic and non-aggressive thanks to its rounded surround profile Practical: Sliding of the brackets in the rail Eco-friendly: Aluminum is 100% recyclable Features: Aluminum panel 15/10 with rails fixed in the surround Film class 1, 2, or 3 Certified NF and CE Options: Thermal coating Closed back Anti-graffiti film...

... finish of your choice. Door thickness: 80 mm, among the thickest on the market. Exclusive anti-bimetal effect system (door deformation due to sunlight exposure). Systematic decoration on both sides of the door. Triple laminated glazing for burglary resistance. Aluminum threshold with a thermal break of 20 mm for accessibility. 3D hinges for simplified adjustment. Available in an infinite range of...

...Modern style door system, pivoting or traditional with thermal insulation. Exterior panel in lacquered aluminum Interior panel in lacquered aluminum Lacquered finishes Other finishes available upon request (phenolic) Accessories in cast ALU or others allowing customer choice...

Surolec was established with the aim of developing activities in the electrical materials trade, guided by the principles of proximity and satisfaction, as well as providing support and advice in various electrical situations. It is a dynamic, professional company with a forward-looking perspective, offering solutions in renewable energy and a wide range of products related to home automation. The...

...NIRVANA is one of our best seller model, because of it's beaitiful decorative design, high thermal efficent values and warm effect. We are producing horizontal and vertical types with different sizes and colors for our clients.NIRVANA have USEFUL MODEL PATENT because of it's unique hybrid structure. NIRVANA made from high quality steel and special aluminum profiles to obtain high termal efficent. ...

...Optical features Indicator type standard Electrical features DC current 20 mA Pin assignment Long pin = anode, short pin = cathode Mechanical features Lens typ Flat Lens size 5 mm Bezel typ Superflat bezel Screw thread size M8 Bezel material Metal Connector type Leads of LEDs Number of Connectors 2 IP Code IP40 Max. panel thickness 10 mm Thermal features Operating temperature -20...+60 °C Storage temperature -25...+80 °C...

... offers thermal insulation. It is possible to add oscillating doors for ventilation, as well as access doors. This system is often combined with insulated sandwich panels to create reception spaces that can be used year-round.

... installations where they are connected to a water heater, central heating, or a swimming pool. Operation of the solar thermal panel Solar thermal panels consist of a set of collectors, a regulation system, and a storage tank. They convert light into heat, most often for water heaters. A heat transfer fluid (water and antifreeze) is heated by this system and thus delivers the stored heat to the water storage tank. To do this, the rays of the sun first pass through...

... shutters, doors, gates and aluminum fences. For several years, the market of closing and specially the insulated aluminum shutters rose sharply in constant search of thermal insulation materials which require no maintenance. With the brand NOVAFERMT ® AV Composites revolutionized the closure sector by offering the market a revolutionary invention: for the first time in the history of the sandwich insulating panel, AV Composites created the first powder coating panel (European Patent). This new product made for the production of shutters, doors, gates, aluminum fences, made of a high temperature resis...