spray head

... Superquattromila Portatile has no rivals! This device's strength lies in its extreme maneuverability: it weighs only 25 Kg and has a range of up to 30 m, both horizontally and in head. With its practical handle and a 6-liter drop tank, it is suitable for use in tight spaces such as stairs, allowing it to be placed on steps. The machine supports a maximum nozzle size of 0.021", so it can spray enamels, paints, primers, anti-rust coatings, tempera, and washable paints.

...Interior cleaning of barrels and containers from 10 to 260 liters - economical use - environmentally friendly solution - ergonomic design - hygienic washing results Quality features - completely made of stainless steel 1.4301 - collection tray for capturing and draining wash water - tipping device for holding the barrels or containers - grid with integrated fixed ball spray head - hand valve for...

... individual, perfectly tailored microspray system for every "lubrication situation." Even with angled installation of the coaxial hose, no oil pooling can occur, as the lubricants are transported in separate hoses. Mixing only occurs in the spray head.

...with spray head and screwed-on pressure dispenser...

...Coating system for PEX-a pipes: Applied layers: Adhesion promoter – EVOH – Adhesion promoter – PE outer layer Coating system: for a PE foam hose with an LDPE film Aluminum coating system AU 110: for coating PP pipes with an outer diameter of 16–110 mm using a 150–200 µm aluminum foil to produce a stable pipe Aluminum foil unwinder with edge control: Coating station with pressure rollers and hot air devices: 2-layer coating head: for coating a prefabricated pipe with an adhesion promoter and an EVOH outer layer Cross-spray head: for applying the PP outer layer to an aluminum-coated PPR pipe...

... ring line system. Additionally, there is a specific oil dispensing point, which comes in various configurations depending on requirements: rotary, as a drop dispensing point, with a form head, or as a spray valve. A control unit manages and monitors the lubrication process.

...Carbon Residue Cleaner. A blend of powerful solvents that dissolve crystallized and hard carbon deposits that typically form inside and outside the engine, causing poor performance. Sprayed at the base of common rail injectors, it facilitates their removal from the engine head. It dissolves carbon deposits inside the turbine, the EGR valve, and the throttle bodies of diesel intake ducts.

...Design and ergonomics studies for a new generation of sunscreen spray bottles. Optimization of the bottle shape and spray head considering ergonomic, economic, and brand aesthetic aspects.

...in the kitchen, or in the bathroom. ADYS offers the ready-to-use Bicarbonate Gel in a 500ml bottle with a spray head for easier application. Also consider the ready-to-use Vinegar Gel to provide a wider range to your customers. Do you want to offer your customers smart and effective products? Contact us quickly at 04 30 22 00 57 or through the contact form above.

... vapor H2O. This significantly reduces the emission of nitrogen oxides. Particular challenges in manufacturing include the machining of heat-resistant stainless steel. The spray mist that needs to be produced also places the highest demands on the precision of the nozzle head. Additionally, vacuum soldering requires a particularly tight fit with minimal tolerance between the components.

... lubrication properties - Creeps under dirt and stubborn grease and oil residues - Allows for easy removal of labels and adhesives - Silicone-free - Smart Straw version with integration into the spray head for precise dosing in hard-to-reach areas...

...Toilet Seat Cleaner Refill 400ml (approx. 1,500 applications). Dispenser for toilet seat cleaner with spray head for economical use.

...SPRAYING FOR ALL LUBRICANTS Oil and liquid spraying pneumatic pump electric pump spray head: oil + liquid (single and in group) Grease spraying, spraying principle Grease spray head (single and in group) pneumatic pump pneumatic grease pump...

...nursing homes, etc.) Product advantages: - Compact size - Adjustable spray head - Translucent reservoir with a wide opening Reservoir capacity: 4.5 L Voltage: 220 V / 50 Hz Power: 1400 W Nebulization capacity: 150-260 ml/min (9-16 L/H) Nebulization distance: 8-10 m Particle size: 0 to 30 micrometers Working time: 20 minutes continuously Dimensions: 38X23X43 Weight: 4 kg...

...Full cone nozzles for cleaning purposes, foam suppression, surface spraying, etc. Available in various materials and designs. The classic full cone spray pattern of this nozzle is achieved through a special swirler inside the nozzle and a large flow cross-section in the nozzle head. This also ensures an even droplet distribution across the entire cross-section. Materials: Brass, stainless steel AISI 303, AISI 316 upon request, PVC, or others. Threads: BSPT (British Standard Pipe Taper).

...Pro 600 ml Graduated Sprayer For all acidic or alkaline products. Straight jet or mist, ergonomic with a non-slip handle, easy to grip. Precise dosing of products thanks to its integrated graduation. Heavy-duty spray head. Available in 4 colors: Green (Floors and surfaces), Blue (Degreaser), Red (Acid), translucent (Food grade). Reference: MAT-PULGRAPRO/600 Weight: 600 ML...

... spray gun with hand lever, with all necessary compressed air and blasting hoses, with large plexiglass door (750 x 400 mm) for optimum visibility Filter system (residual emission <5 mg / m³). Material:steel Surface:powder coating...

...with base - Compliant with standard EN 15154-1+2 - Body shower: Central post in stainless steel, green epoxy coating; shower arm in brass, green epoxy coating; shower head in plastic, automatic drainage - Eye wash station: components in contact with liquid made of stainless steel - Water connection: 1 1/4" - Water flow, safety shower: > 75 l/min at 2 bar pressure - Water flow eye shower: >16 l...

... completely replaced when the filters are saturated (filter replacement not possible). They can be used for longer than one work shift due to additional dolomite dust testing. During work breaks, they can be stored in the provided airtight bag. Effective against organic gases and vapors as well as against particles up to filter class P3 at concentrations up to 30 times the limit value. Typical application areas: spray painting, spraying of 2-component paints based on PU, chemical industry, etc.

... contamination to the start of cleaning. Cleaning the PU Gun: After removing the empty PU canister, screw the cleaner onto the gun adapter and pull the trigger a few times to flush the gun. Allow the cleaner to sit for a while and then flush the gun again. Unscrew the cleaner canister and clean and dry the adapter. Spray the gun adapter with Vaseline spray. Spray Cleaning: Attach the spray head to the valve and spray the contaminated area with light pressure. Allow the cleaner to take effect...

... watts, 240 volts. The cutting head rotates at 11,000 revolutions per minute and accommodates two 82mm wide standard tungsten carbide blades. Following the hull contour, the cut remains clean and smooth. A cutting rate of 15 m² per hour can be easily achieved. Two adjustable guide plates at the nose allow for free adjustment of the cutting depth.

...Professional Cone Grease Nipple "Series H" for screwing in according to DIN 71412. Features Form A = Head 180° Reliability and precision for original equipment manufacturers and the spare parts market High corrosion resistance (72-hour salt spray test) RoHS compliance (trivalent chromium) Internal pressure resistance min. 400 bar Made from precision automatic steel, hardened, galvanized, and passivated...

...Manual ear irrigation system with a 500 ml spray bottle. The attachment is designed for the safe removal of dirt and cerumen from the ear canal and can be used in conjunction with the hand spray head or syringes with a LuerLock tip. Its special shape prevents overpressure in the ear canal. The three-stream alignment of the water prevents direct contact with the eardrum. Integrated drainage...

... is completely omitted, eliminating any spray mist. To ensure a reliable lubrication process, it is possible to monitor the rotation and flow rate with our accessories. Minimal wetting diameter: Ø 5 mm Dimensions with standard rotor: 214 x 60 x 86 Weight: 1.15 kg nN: max. 17,000 rpm...

...Pipework plastic-coated in signal green (RAL 6032). Includes notice sign "Emergency Shower". Eye shower according to DIN EN 15154-2 for permanent installation on laboratory fittings or drinking water lines. Innovative AXION® MSR® eye/face shower head with spray effect directed away from the nose to the edge of the face. Integrated flow regulator. Material: ABS. Actuation via special pressure plate valve made of brass, non-self-closing.

...Automatic Cleaning System for the applicator spray head Description Automatic cleaning of the contamination on the atomizer. It is specially designed for atomizers like ACCUBELL® and PPH models (equipped with all the existing types of bells : ø35 mm, ø50 mm, ø65 mm or ø80mm). Performance Air shroud cleaning device for a steady application Air/material cyclonic separator Productivity Increase your working time by reducing production stops Automatic process managed by paint automation Sustainability Reclaiming all cleaning material Operators spend less time cleaning with solvent...

...Floor-mounted laboratory shower with eye/face wash fountain. The shower features a stainless steel shower head and is operated using a pull rod lever. The eye/face wash includes two aerator spray nozzles as well as dust protection caps and is activated by a push plate. The dust protection caps are removed by the water jet. The water jet can be adjusted using the integrated flow regulator.