silicon carbide

...Ceramic nozzles with openings up to 0.4 mm are characterized by high hardness and high chemical resistance. The nozzles are produced from aluminum oxide, zirconium oxide, silicon nitride, and boron carbide.

...Waterproof abrasive paper with silicon carbide on a paper backing. • Closed coated silicon carbide for high material abrasion • Fine grinding grit 2000 • Flexible paper underlay for optimal workpiece adaptation...

...Screw pumps can achieve high working pressures thanks to the silicon carbide casing and highly resistant screws. Brinkmann screw pumps are suitable for processing filtered lubricants such as cutting oils and water-oil emulsions. Screw pumps must never run dry. Volumetric flow rate: up to 878 l/min Pressure: up to 200 bar Pumped product: for cooling liquids, emulsions, oils, for lubricants Drive...

...Sanding fleece 150 mm, 800, fine, silicon carbide (Si) Article number: 3608604025 Diameter: 150 EAN: 3165140018692 Content: 1 piece Grain size: 800 MFR: 3608604025 Disc diameter: 150 Packaging content: 5...

...The Fastplus™ Foam Grinding Disc FF12 is an innovative combination of a flexible film grinding disc and a soft foam backing pad. The foam disc delivers ultra-soft and flexible grinding, polishing, and finishing results for a fine surface finish. The FF12 foam film disc is coated with high-quality silicon carbide grain and attached to a foam structure that is excellent for curved and contoured...

...FHS sanding papers and sanding fabrics in sheet form can be used universally and are particularly suitable for manual hand sanding and for use on handheld machines. Depending on the requirements and the type of surfaces to be processed, this abrasive material achieves excellent sanding results thanks to its coating of aluminum oxide or silicon carbide. The dust-repellent (antistatic) sanding...

...surface grinding, effect grinding, faceting, matting, satin finishing, polishing, and for working on hard-to-reach areas. D+L supplies flap grinders with grinding cloth (standard corundum, zircon, ceramic, silicon carbide, 3M-Trizact), with non-woven fabric (standard corundum and zircon), and felt with standard shanks of 3/6/8 mm as well as with special shanks (internal-external threads, long shank) in the following designs: - with flat end face - in top shape - with slotted lamellae - in mini format...

...The grinding fleece is spirally wound around a core and foamed with polyurethane. Available types: Type 1 = tough bond, closed surface Type 2 = medium-hard bond, open-pore surface Type 3 = hard and tough bond, closed surface Available dimensions: Diameter: from 70 mm - 500 mm Width: 10 mm - 2000 mm Grain types and grain sizes: Aluminum oxide: 80, 100, 180, 280 Silicon carbide: 100, 180, 280, 500, 800, 1000; 1200; 1500 Standard hardness: 04=very soft 06=soft 08=medium 10=hard 12=very hard...

...Polishing Oils, Lapping Oils, Pastes, Diamond Powders, Lapping Fluids, Suspensions, Corundum, Silicon Carbide, Aluminum Oxide, Boron Carbide, Cleaning Agents...

... punches and dies • Elimination of hardening distortion Both non-ferrous metals (aluminum/copper, etc.) and high-hard steels, such as S600 with 65-68 HRC or 1.2379 with 62 HRC, can be processed. Depending on the material, we use corundum/silicon carbide/CBN or diamond wheels. Our grinding machines must undergo an annual functional and tolerance check by the respective manufacturer to ensure consistent accuracy. In this manufacturing area, we rely on machines from JUNG and Geibel & Hotz.

... complex grinding profiles. Profile diamonds can be used for all grinding wheels (e.g., corundum, premium corundum, silicon carbide grain). The correct arrangement of a diamond chisel tool during profile dressing. Schaudt, Fortuna, and MSO profile diamonds are produced in sizes ranging from 0.75 to 2.0 carats, while Diaform and Jung profile diamonds are made in 1/4, 1/3, 1/2, and 3/4 carat sizes. Slim, uncut natural diamonds with the same holder dimensions are specifically used for pre-profiling.

...Whether it's silicon carbide, boron nitride, or aluminum nitride, our expertise, their advantages, and applications are as extensive as the selection of materials.

...Aluminum Oxide - Polishing agents: Diamond loose or in suspension, Cerium Oxide, CMP polishing agents - Polishing films for all applications - Lapping and polishing discs: GG, GG/Cu, Aluminum, Copper, Tin. Available in custom variants: solid, slotted, grooved, combined - Abrasive rings: GG, Steel, Ceramic, Silicon Carbide, Aluminum Oxide. Available in variants: solid, slotted, pelletized - Flat honing discs / fine grinding discs: Diamond and CBN. In ceramic, resin, or hybrid bonding. - Hand lapping plates - Oils - Other accessories...

...High-quality, flexible fabric mat. For manual use in the workshop. Application area: Steel/Stainless Steel/Aluminum/Wood Silicon Carbide...

... nitride (CrN)), or halide or carbide layers (e.g., magnesium fluoride (MgF2), calcium fluoride (CaF2), silicon carbide (SiC)). The layer thicknesses range from a few nanometers to several micrometers, depending on the material.

...E-paper backing with resin-bonded silicon carbide grain, densely scattered. Aggressive material removal with high tool life due to the resin bond, antistatic. Width from 400 mm - 2050 mm Length from 1500 mm - 6500 mm...

... carbide); corrosion-free carbide; silicon carbide (SSiC & SiSiC); zirconium oxide (ZrO2); silicon nitride (Si3N4); aluminum oxide (Al2O3); metal-impregnated graphite Precision grinding for hard materials and hard coatings; flat, cross, round, and coordinate grinding, flat and round lapping & polishing; joining techniques: shrinking, soldering, gluing Our products: ceramics for technical...

Sialon Ceramics Lts was founded in 1986. We are a manufacturer of Sialon ceramics and sintered silicon carbide products. We are also a manufacturer of direct immersion heaters for heating zinc, magnesium, and aluminum melts up to 850 degrees Celsius.

... shaft protection sleeves and pistons made from all common hard materials. • Silicon carbide (pure or reaction-bonded) and hard metals for pump applications in the pharmaceutical and chemical industries (sliding ring seals, sliding bearings, pistons, valves, homogenization). • Silicon carbide and hard metals for applications with food contact. • Aluminum oxide and zirconium oxide for pharmaceutical processes.

OXIDKERAMIK J.Cardenas GmbH manufactures ceramic components from a wide range of high-performance ceramic materials. Our materials include OK997, a high-purity aluminum oxide ceramic, CARSIC310, a directly sintered silicon carbide, and CR101 and CR105, two different zirconium oxide ceramic qualities. The precision components made from ceramics are used in various applications due to their unique...

The range includes both oxide ceramics such as aluminum oxide and zirconium oxide, as well as non-oxides like silicon carbide and silicon nitride. Application-oriented material development and ceramic-compatible design are part of the service spectrum, along with rapid prototyping, small and medium series production, as well as efficient large-scale production.

...mixed corundum, silicon carbide, glass beads, ceramic beads, garnet sand, bauxite, low and high carbon steel shot, angular steel shot, round and angular hard cast, stainless steel abrasives in round and angular forms, as well as walnut shell granulate and plastic abrasives. In addition to supplying high-quality abrasives, Kuhmichel also offers a comprehensive recycling concept for the return of used abrasive residues.

SINTERALL is a leading company in the field of ceramics for technical and industrial applications. The experience gained over more than 70 years in the industry allows us to design and produce items with high technical requirements, ensuring customers receive consulting and technical assistance from design to usage. The aluminum and zirconium oxides, as well as silicon carbide produced by...

Development and manufacturing of carbide and diamond tools, highly wear-resistant components made from HSS, HM, oxide ceramics, silicon carbide, boron carbide, boron nitride, and diamond, services for form cutting tools, spark erosion wire cutting, and starting hole drilling. Rotational form cutting units of the ROTAcut series, equipped with highly wear-resistant form and counter cutting cylinders made from HSS and high-performance carbide. Conceptualization and manufacturing of custom cutting systems.

... applications of CHEMICAL NICKEL processes, electrolytic processes, and conversions of metallic surfaces forms the cornerstone of its "know-how." Chemical nickel deposits: - High phosphorus chemical nickel - Medium phosphorus chemical nickel - Nickel PTFE - Silicon carbide Electrolytic deposits: - Tin - Tin-Nickel - Tin-Lead 60/40 - Silver - Electrolytic nickel - Gold - Cadmium - Copper Conversion: - Passivation/Stainless Steel/Copper - Alodine 1200 - Alodine 1500 - Surtec 650...

...Aluminium Titanate, Silicon Carbide, Monolithic. Thermocouple Protection Tubes: Sialon, Silicon Carbide. Degassers: Long life one piece Silicon Carbide Immersion Heater Tubes: Sialon, Silicon Carbide Refractories: Speciality Corundum Resistant (guaranteed) monolithic and precast Induction Furnace Refractories: Complete range for careless and channel furnace applications. Stoppers and Nozzle.: Clay...

... mechanical seals and pumps is offered. Other Product Groups: - Stirring seals for food and industry - Barrier pressure systems - Precision parts made of tungsten carbide, silicon carbide, zirconium oxide, technical ceramics - Packing seals from German production - SAWA stainless steel pumps for the food industry - Vacuum pumps - Electrical and mechanical troubleshooting in pumping systems...

SUPPLY OF TECHNICAL CERAMICS FOR INDUSTRIAL USE, REGARDING COMPONENTS MADE OF ALUMINA, ZIRCONIA, SILICON CARBIDE, SILICON NITRIDE, MACOR, AND SHAPAL.

... - Alumina-Ceramics - Silicon Carbide - Tungsten Carbide - C/C Composites, CFC - Molybdenum - Technical Plastics - Carbon Fiber These materials are for industrial use with applications such as: - Refractories - Mechanical seals - Furnace components - Casting and Foundry - Glass industry - Brushes and Scrapers - Pump blades - Carbon Fiber You can also follow their blog for all the latest news about materials and useful information on their uses and applications at: http://www.carbosystem.com/category/blog/...

FCT Ingenieurkeramik stands for more than 30 years of experience and expertise in materials engineering and the production of high-performance ceramic materials and composites. Our specialty lies in silicon nitride and silicon carbide-based ceramic materials. Using our facilities, we manufacture components with various shaping and sintering techniques, typically tailored to the drawings and...