nuts and washers

... FLANGE JOINT COMPONENTS At present, one of the most effective connections used in industrial facilities is a flange joint. This is an airtight connection that provides high structural integrity, consists of two flanges, fasteners (studs or bolts, washers, nuts) and gaskets. An important matter in choosing a set of flanges is tightness. The gasket material must have good elasticity, strength, resistance to the operating temperature conditions and to the media with which direct contact is expected. For flange joints, Villina company uses the following types...

... parts are subjected to washing (degreasing), rinsing, passivation and drying processes respectively (depending on the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively in a single device. Full penetration is achieved by pressurised spraying and immersion effects in each section. It is a very functional model used especially for washing bolts, nuts, washers, or small parts of this type, and fittings, nipples, couplings and fittings processed in high quantities on cnc and automat machines. AISI 304 :Stainless Steel Washing Body...

...Threaded pins with counter-nut for wedge sockets acc. to DIN EN 13411-6 galvanized surface material: 42CrMo4V The threaded pins are assembled with thin nuts acc. to DIN 439 and washers acc. to EN ISO 7089.

...Blind flanges, threaded flanges, smooth flanges, pre-weld flanges, loose flanges. Available in black C22.8 or RSt37. In stainless steel 1.4541 and 1.4571. In 1.4571, blind, loose, and smooth flanges are also available with reduced plate thickness. Loose flanges are also available in aluminum or pressed from 1.4301 sheet metal. Additionally, we naturally have matching screws, nuts, washers, and seals in stock.

...We connect wire parts with stamped parts, assemble nuts, washers, sealing rings, and can also perform the following assembly processes with our machines in further work steps: Screwing Embossing Riveting Flanging...

...Our product range consists of over 1,000,000 items for industrial production, maintenance, and upkeep. Fasteners: our roots, our passion... But we can offer you much more than just screws and nuts. Here is a selection of product groups available in our standard range to give you an overview of its breadth: - Screws, nuts, washers, - Threaded rods, - Pins, - Lag screws, - Fittings, - Rivets, - Clamps, - Anchors and fastening devices, - Studs, - Caps and plastic parts.

...4 Head Weighing Vertical Packaging Machine Packable Products: Dried fruits, confectionery chocolates, spices, chips, tea, biscuits, crackers, etc. food products, nuts, bolts, washers, etc. fittings Filling System: Weighing Packaging Weights: 10-80 g / 80 g - 1000 g Weight Accuracy: 2 g - 6 g +/- Package Types: Pillow pack and Quadro pack Packaging Capacity: 18 - 30 packs/min Packaging...

...CNC Long and Short Turned Parts Ø 2 - 50 mm Screws, Nuts, Bolts, Washers Automatic Steel, Stainless Steel, Aluminum, Brass Variety: With Surfaces Manufactured: in Germany...

...Hexagon screws, nuts, and washers with special coating Zinc flake coating (GEOMET 500, GEOMET 321) as a special corrosion protection for high-strength screws and accessories...

...For single or multiple versions, standing, for sliding or fixed mounting, with spacer. Base and cover made of aluminum, bolts galvanized, washers galvanized, nuts galvanized. Other fastening elements, supports for larger rail cross-sections, or horizontal versions available upon request. Fastening elements in A2 version available upon request.

...We offer you a wide range of products tailored to your individual needs and also in accordance with international standards. In addition to our focus on custom special and drawing parts as well as application-specific products, we have a broad assortment of standard parts. - Screws - Nuts - Washers - Rivets - Pins/Machine elements - Threaded rods/Connectors...

... and facilitating maintenance and repair. With different sizes and types available, tailored for specific applications, our fasteners guarantee optimal performance and durability in demanding environments. Whether for industrial machinery, consumer electronics, or structural projects, our comprehensive selection meets the strict standards of precision, strength, and corrosion resistance, ensuring long-term reliability and operational efficiency.

... - Beam Connectors - Wire Pins / Nails - Flat Steel Anchors - Fencing Hardware - Gerber Connectors - HE and Profile Anchors - HECO-TOPIX-plus Sets - Industrial Packaging - Integral Connectors - Knaggen - Strap / Risp Band - Hole Plates / Strips - Disc Dowels - Screws, Washers, and Nuts - Rafter Purlin Anchors - Rod Dowels - Support Feet / Post Carriers - Angles - Accessories...

...Telli - Pop rivets, nut rivets, insert nuts, press-fit bolts, rivet guns, stud welding bolts, stud welding machines, pneumatic and electric assembly equipment, screws, washers, nuts, and technological equipment are supplied with quality, speed, and a sense of security.

...washers, self-tapping screws, and wood screws, along with our technical expertise, we are able to offer you the right solution for fastening problems of all kinds. If the desired product is not listed, simply inquire with us; we deliver everything. Special sizes for wind turbines or galvanizing of screws or retaining rings are also available. Category: Plastic/Nylon Screws DIN: DIN 84, 963...

...In our company, we manufacture screws, nuts, and washers made from titanium 3.7035, as well as various other fittings and custom turned parts according to customer specifications in different materials.

...The extensive accessory range for installation systems fischer offers a comprehensive range of accessories for installation systems: suitable fasteners such as screws, washers, and nuts, as well as components for connecting to various substructures and substrates.

...Washers for snap-on caps. These rings are applicable for cap type: 66 Material: PA Colours: natural Ring type 66 suitable for DIN 84, 85, 96, 439, 6912, 7971, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4035. Dimension A has to match the dimension A of the snap-on caps.

...Milmag ensures reliable transport performance even when the material being transported is dirty and abrasive, thanks to its powerful neodymium magnets. It is designed for the transport of broken, fine, and small chips and parts generated during the processing of iron materials. It offers high efficiency in transporting these products in the manufacturing of bolts, nuts, washers, and other components...

...Stainless Steel Cross Clamp Connector Form • A: without seals • B: with seals Stainless Steel • corrosion-resistant, 1.4308 • corrosion-resistant, 1.4305 Clamp Holes mechanically processed Hexagon Screws DIN 603 Stainless Steel A2 Cap Nuts DIN 917 Stainless Steel A2 Corrosion-resistant Stainless Steel A2 Washers Plastic (Polyacetal POM) Edge Ring Silicone, 40 ... 60 Shore A Item Number: GN 132.5-B30-B30-40-A Weight: 296 d1: B 30 d2: B 30 d3: M 8 d4: 37...

... the tools you need in no time. Our services also include: - Planning, manufacturing, and installation of locking systems - Contract work - Packaging of screws / nuts / washers - Assembly of connection sets - On-site service: Our employees assist you in planning and implementing your security concepts for your projects.

...Complete installation kit including: 1x adjustable stainless steel bracket. 1x ball valve with integrated check valve at the inlet. 1x NF and BELGAQUA certified check valve at the outlet. 2x brass fittings and plate nuts (for securing to the bracket). 2x 3/4" male fittings (for connecting to devices like 75 or 150B). 2x stainless steel screws D.8mm, length 60mm. 2x washers. 2x universal 10mm plugs.

...construction, maintenance, machine repair, refrigeration and air conditioning technology, crafts, and for stocking in retail. Including nuts, washers, and spring rings. In a robust and refillable Stanley assortment box. 3 variants available. Unique offer! The recommended storage duration before using the rubber-metal elements is 5 years. Load range: 218 - 1,128 N static / buffer Number of variants: 10 Designation: Assortment box Climate Cold Item number: A198004 Price: 149.00...

...Fasteners DIN 933 / DIN 934 / DIN 125 / DIN 9021 / DIN 7991 / DIN 912, ASTM GR2, screws, nuts, and U-washers from M3 - M16, threaded rods from M4 - M16. Other dimensions available upon request. Fasteners DIN 933 / DIN 934 / DIN 125 / DIN 9021 / DIN 7991 / DIN 912 GR5 Most dimensions available upon request.

...Nuts and washers according to DIN and other DIN and standard parts available on request.

...It’s a fully automatic counting and packing machine for Furniture kits and hardware spare parts like screws, bolts, nuts, washers, springs, and plugs. High precision and fast, save the labor cost you. Widely used in fasteners, hardware, furniture, and bathroom field. You only need to put the spare parts into the hopper and roll film on the packing machine, set in the quantity that you need to in...

...AJS supply high quality steel slotted channel and the additional products which will ensure they are fitted to solid fixtures securely and remain safe. The slotted channel which is available is supplied in 3 lengths: 3, 5 and 6 meters and varying dimensions. All of the required additional fixtures are also supplied: channel brackets & plates - such as window brackets, top plates and tee brackets. channel end caps, channel nuts, channel set screws, feet and washers. ...

...We offer various types of pipe clamps. Please send us an inquiry. Example: Clamp diameter approx. 183mm-187mm Material: 1.4301 Made from flat 30mm*5mm Delivery includes: clamp including screws; washers and nuts for fastening. Surface: shot-blasted...

...Specifications Galvanized: Feet for light load equipment Model 90 shores A (black), model 60 shores A (gray) Very good grip on all surfaces Fixed leveling rod with standard thread Supplied with 2 locking nuts and 2 washers Chloroprene rubber base Stainless Steel: Stainless steel threaded rod NF A 35-573/574, model 90 shores A (black), model 60 shores A (gray) Adjustable foot with fixed rod, model supplied with 2 nuts and 2 washers Chloroprene rubber base...

...Serrated rings for holes ZJ, Spring washers for shafts, without groove KS, Grooved nuts DIN 981 KM, DIN 1804, DIN 1816, Self-locking grooved nuts GUA, GUK, GUP, Support discs DIN 988 SS, Spacer discs DIN 988 PS, Disc springs DIN 2093 A, DIN 2093 B, Tension rings for shafts SW, for holes SB, for bearings DIN 5417 SP, Bent tension rings for shafts DIN 7993 RW, for holes DIN 7993 RB, Locking plates DIN 5406 MB...