gas, compressed

... bar – 5 bar). *2) Free passage diameter of nozzle orifice for DOVVA-G 70° spray angle type. *3) Measured by Laser Doppler Method. Applications Denitration: Gas cooling Moisture control: Flue gas Combustion: Waste water Thread standard:- Pipe conn. size:Rc 1/2" or Rc 3/4" Standard pressure:- Spray angle:70°, 55° Spray capacity:1.0–50 ℓ/min (*1) Supply air type:Compressed air Liquid feeding system:Liquid pressure Mean droplet diameter:- Air Consumption:50–3,000 ℓ/min, Normal (*1) Air pressure:- Free passage diameter:2.5–7.5 mm (*2)...

... robust aluminum casing. User-specific settings are saved in the display and can be transferred from one device to another via the display. Max measurement error Mass: +/- 3.0% Measurement range: Depends on the type of gas and process conditions Product temperature range: -40... +100 °C (-40... +212 °F) Max process pressure: -0.5... 20 bar g (-7.25…290 psig) Materials in contact with the product Sensitive element: 1.4404 (316L) Materials in contact with the product Insertion tube: 1.4404 (316L); 1.4435 (316L)...

...High-precision calibrated tube Recommended for pneumatic and vacuum installation operations Very good mechanical strength, recommended for use in cable carriers Bend radius: 45 mm Temperature range: 0 to +100°C Max operating pressure at 20°C: 136 bar Shore hardness: 96 Fluid: Compressed air, Neutral gas, Vacuum Material: Polyamide (PA) Outer diameter: 6 mm Inner diameter: 3 mm...

... for immediate detection of limit exceedances, initiating corrective actions and thus enabling a permanently oil-free compressed air supply. -OIL-Check 400 – Residual oil measurement of vapor-phase residual oil content from 0.001…2.5 mg/m³, 3…16 bar. Highly accurate PID sensor, integrated mini-catalyst for zero-point calibration -Permanent, highly accurate residual oil measurement (oil vapor) with...

...Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)...

...Produce your own oxygen using the OXY World PSA oxygen generator, eliminating the costs associated with purchasing liquid oxygen. OXY World PSA oxygen generators generate oxygen gas from compressed air and provide a more cost-effective and safe alternative to traditional oxygen gas sources such as cylinders or liquid oxygen. User-friendly OXY World PSA oxygen generators can be customized and shaped according to specific needs in the field.

... control has user friendly interface with automatic start/stop function based on gas consumption. Medical Oxygen Generators produce gaseous oxygen from compressed air on site and offer a cost-effective, reliable and safe alternative to traditional oxygen gas supplies such as cylinders or cryogenic liquid. Medical Oxygen Generators are available in several standard models with a capacity ranging from 0.4 to 150 m3 / hour at 93-95% purity. The design is made for round the clock 24/7 operation. Each oxygen generator is equipped with an automatic start & stop function, enabling the generator t...

... - Control torque: 800 N - Motor voltages: 24 V AC/DC, 230 V, 110/120 V - Control: 3 points; (0)2-10V; (0)4-20mA Accessories - Electronic positioning system, limit switch, position feedback signal. All electric actuators are also available with a safety position. Size: DN 15 - DN 50 Pressure: PN 40 Material: Stainless steel 1.4408 Temperature: -30 °C - 200 °C Connections: Whitworth thread; NPT thread Application: Gas, vapors, liquids Degree of protection: IP65...

...Rotex offers a broad range of pneumatic solenoid valves (commonly known as Air solenoid valves) that includes Electric air solenoid valve, high-pressure pneumatic solenoid valves, and compressed air solenoid valves. Depending on the port, Pneumatic solenoid valve is available as 2 way pneumatic solenoid valve, 3 way pneumatic solenoid valve. Rotex also offers gas solenoid valves in various...

...sealing for the main two-pocket case/drawer, drawer size O/A: 7.17" (182mm) x 10.2" (257mm) x 2.36" (60mm), pocket entry: 1.17" (182mm) x 15.12" (384 mm) x 2.36" (60 mm), photoelectric cell to control the film, gas washing capacity, vacuum pump, 220V / 60Hz / 3 Ø. 2nd DESCRIPTION/FEATURES Stainless steel coating Compressed air band unwinding Extendable roller of 3" or 6" for the conveyor band Model: K6972...

... The GLS 300C suit in Chemprotex™ 300 is a single use air-fed gas-tight chemical protection suit for use with breathable air supplied from an external compressed air source providing positive pressure. The suit combines the benefits of a lightweight high-performance chemical barrier fabric with a gas-tight construction to method 2 of ISO 17491-1. It incorporates permanently attached antistatic chemical gloves, sock feet and a lightweight gas-tight zip.

INGESHOP, a supplier of equipment for environmental protection, goods, and people, is the e-commerce store of INGETECH, a technical studies office specializing in water management and treatment on ICPE sites for all professional sectors. The products offered have been selected after approval and validation of their effectiveness for their intended uses. Discover our tanks and reservoirs for rainwa...

...These are tube bundle heat exchangers specifically designed for the cooling of pressurized gases (natural gas, methane, hydrogen, compressed air, mixed gases). The construction material is stainless steel (AISI 304, 316, and 321). The operating pressure on the gas side is up to 1000 bar. They are designed and manufactured according to ASME VIII div.1, EN 13445, and TEMA, and are PED certified.

...10 litres calibration gas (100 ppm H 2 in nitrogen) for all FAN H 2 breath test devices. Compressed in an 1–litre aluminium can, at least 12 calibrations can be readily achieved.

... respiratory protection with our own gas protection devices (compressed air respirator PA 80 AE, hose device PL 67) • Respiratory protection devices are inspected according to the regulations of the main office for mining rescue services as well as ZH-701...

...BMI is based in Nogent and offers its services and expertise in the installation of compressed air compressors in the industry sector of Haute-Marne. Compressors are essential devices in the industry for compressing air or gas fluids and increasing their energy. Useful for producing compressed air, they are indispensable in refrigeration systems and many other fields. Some compressors operate on oil, which can pollute the produced air. Regular maintenance should then be considered. Several types of compressors produce compressed air: vane compressors, screw compressors, dry compressors, etc.

...Discover the superior quality and modern technology of Nitroxtec in oxygen gas production. PSA technology is applied in the separation of oxygen gas from compressed air. With PSA technology, you can produce oxygen gas with a capacity of 0.5 – 385 Nm3/h and a purity range of 90% – 95%. Please contact us for more cost-effective, safe, and tailored alternative products. Nitroxtec has the modern...

...• Development, manufacturing, and installation of gas technology systems • Planning and installation of pipelines for technical gases, laboratory gases, compressed air, vacuum, water, as well as exhaust and flue gas systems • Production of pressure vessels and apparatuses (e.g., gas humidifiers, gas heaters, storage tanks, and heat exchangers)...

...System press fittings from copper and copper alloys for copper pipes according to EN 1057 for solar and high-temperature applications for compressed air. SANHA®-Press Solar system fittings  have red moulded sealing rings made from FKM. Material:Copper Cu-DHP (CW024A / CW724R) O ring:FKM Operating pressure:16 bar Operating temperature:-20 °C - 200 °C Dimension:12 - 108 mm...

...Used as a terminal fitting for ventilation openings in tank systems, deflagration-proof, suitable for substances of explosion group IIB3 with a standard gap width (NSW) ≥ 0.65 mm for a maximum operating temperature of 60 °C. Primarily used as a filling and venting device for fixed-roof tanks. To prevent unacceptable overpressure and underpressure as well as unwanted gas losses or unacceptable emissions. Housing structure is vertical on a tank roof. If necessary, equipped with an explosion-protected condensate drain safety.

...Single elastic shoe protectors - Double elastic shoe protectors - Handmade shoe protectors are available in 3 varieties. Production in accordance with international standards. Main Material: Polyethylene (PE) Quantity: 1000 Pieces (Compressed packaging) Suitable for recycling.

... a COMPLETE and REAL picture of the entire compressed air system and its electrical consumption. Furthermore, the controller is equipped with a "self-learning process" intelligence. This controller finally opens the door to the life cycle cost of the compressor...

...Shoe protectors Production in accordance with international standards. Main Material: Polyethylene (PE) Quantity: 1000 Pieces (Compressed packaged) Suitable for recycling.

...Flexible Metal Braided Hoses can be easily used in various steam, water, oil, and gas systems due to their pressure resistance and elastic structure. Some of their applications include: transporting liquids, resolving issues arising from installation, and absorbing vibrations and expansions. The service life of hoses is equal to the total number of loading cycles until the first leakage occurs. The loading cycle count is the number of times the hose returns to its starting point after a unidirectional movement. The service life depends on many factors, the most important of which are:...

...Industrial Gas Transport Tank. Oxygen, Hydrogen, Argon, Nitrogen, Helium, Carbon Dioxide, Acetylene, CNG Compressed Natural Gas. Fire extinguisher.

...Vacuum gripper for horizontal handling of gas cylinders, including pneumatic center of gravity compensation for off-center load handling. Vacuum gripper / suction lifter for horizontal handling of gas cylinders, including pneumatic center of gravity compensation for off-center load handling. The pneumatic load handling occurs without an electrical connection. Only a 6-bar compressed air...

... identified by a stream of bubbles. Benefits: economical and uncomplicated visual inspection allows localisation of the leak for all flexible and rigid kinds of packaging (food-, pharmaceutical-, industrial- and other packaging) short testing period (< 30 sec.) easy-to-use intuitive operation – no special skills required easy installation and start-up no trace gas required in package can also be used for altitude simulation optionally also for vacuum packaging, set order-No. 956992700 no calibration required various chamber sizes avail...

... corrosion-resistant, decorative, and technical applications. Various systems from 250 to 1000 Amperes. Can be combined with SciTeeX spray booths. Flame Spray System: Uses oxygen and fuel gas, typically propane or acetylene, to generate the heat source. The molten material is directed onto the surface using compressed air. Suitable for corrosion-resistant, decorative, and technical applications.

... cartridges. With their large filter area, the "PF-Jet" units are particularly suitable for high raw gas loads. Multiple extraction arms, extraction tables, or other capture sources can be connected to these units. The automatic control of the filter system monitors the contamination of the filter cartridges and cleans them automatically with compressed air (jet impulse) at the appropriate time. The cleaned dust falls into the mobile dust collection container. From there, the dust can be easily disposed of.

...Side channel blowers increase the pressure of the drawn-in gas through a series of vortices generated by centrifugal force in the peripheral ring channel. The rotation of the impeller sets the gas in each chamber into a rotational motion, while the resulting centrifugal force pushes the gas outward into the side channel. This creates spiral vortices. During these vortices, the gas is repeatedly compressed, resulting in a linear pressure increase along the entire length of the side channel.